This paper presents an effective design approach for reducing the weight of a flexible rotor in ball bearings with rotational speed and load dependent stiffness characteristics under constraints on the system eigenvalues and bearing fatigue life. Design variables are chosen to be the inner radii of shaft elements, the positions of ball bearings, and the preloads on the bearings. The stiffness characteristics of high speed ball bearings are completely described as functions of applied loads and spin speed, and applied to the dynamic behavior analysis of a rotor-bearing system. A transfer matrix method is used to obtain eigenvalues of the system and an augmented Lagrange multiplier (ALM) method is employed as an optimization technique. A multi-stepped rotor supported by two angular contact ball bearings is analyzed and designed to show the speed and load dependent stiffness effect on the system dynamic behavior and to demonstrate the effectiveness of the proposed optimum design approach. The results show that the effect of the stiffness on the system dynamic behavior is noticeable and that the suggested design approach is effective. [S0739-3717(00)00803-5]

Issue Section:
Technical Papers
Keywords:
rotation, rotors, machine bearings
Topics:
Ball bearings, Bearings, Design, Rotors, Stiffness, Stress, Weight (Mass), Optimization, Fatigue life, Eigenvalues
1.
While
,
M. F.
,
1979
, “
Rolling Element Bearing Vibration Transfer Characteristic: Effect of Stiffness
,”
ASME J. Appl. Mech.
,
46
, pp.
677
–
684
.
2.
Gargiulo
,
E. P.
,
1980
, “
A Simple Way to Estimate Bearing Stiffness
,”
Mach. Des.
,
52
, pp.
107
–
110
.
3.
Lim
,
T. C.
, and
Singh
,
R.
,
1990
, “
Vibration Transmission Through Rolling Element Bearing, Part I: Bearing Stiffness Formulation
,”
J. Sound Vib.
,
139
, pp.
179
–
199
.
4.
Rajan
,
M.
,
Rajan
,
S. D.
,
Nelson
,
H. D.
, and
Chen
,
W. J.
,
1987
, “
Optimal Placement of Critical Speeds in Rotor-Bearing Systems
,”
ASME J. Vib. Acoust. Stress, Reliab. Des.
,
109
, pp.
152
–
157
.
5.
Shiau
,
T. N.
, and
Hwang
,
J. L.
,
1990
, “
Optimum Weight Design of a Rotor Bearing System with Dynamic Behavior Constraints
,”
ASME J. Eng. Gas Turbines Power
,
112
, pp.
454
–
462
.
6.
Chen
,
T. Y.
, and
Wang
,
B. P.
,
1993
, “
Optimal Design of Rotor-Bearing Systems with Eigenvalue Constraints
,”
ASME J. Eng. Gas Turbines Power
,
115
, pp.
256
–
260
.
7.
Shiau
,
T. N.
, and
Chang
,
J. R.
,
1993
, “
Multi-objective Optimization of Rotor-Bearing System with Critical Speed Constraints
,”
ASME J. Eng. Gas Turbines Power
,
115
, pp.
246
–
255
.
8.
Vanderplaats, G. N., 1984, Numerical Optimization Techniques for Engineering Design: With Applications, McGraw-Hill, New York.
9.
Murphy
,
B. T.
, and
Vance
,
J. M.
,
1983
, “
An Improved Method for Calculating Critical Speeds and Rotordynamic Stability of Turbomachiney
,”
ASME J. Eng. Power
,
105
, pp.
591
–
595
.
10.
Jones
,
A. B.
,
1960
, “
A General Theory for Elastically Constrained Ball and Roller Bearing Under Arbitrary Load and Speed Conditions
,”
ASME J. Basic Eng.
,
82
, pp.
309
–
320
.
11.
Ioannides
,
E.
,
Harris
,
T. A.
, and
Ragen
,
M.
,
1990
, “
Endurance of Aircraft Gas Turbine Mainshaft Ball Bearings-Analysis Using Improved Fatigue Life Theory: Part 1–Application to a Long-Life Bearing
,”
ASME J. Tribol.
,
112
, pp.
304
–
308
.
Copyright © 2000
 by ASME
You do not currently have access to this content.