... a tool cooling geometry, cutting speed, and cryogen flow rate as well as predicting tool life and achievable material removal rate. A detailed explanation of the analytical heat transfer model is presented, which is a modified form of Loewen and Shaw's orthogonal cutting model, where a thermal resistance...

... three-dimensional (3D) printer, has great potential for rapid prototyping of custom-designed cell culture devices for biomedical research. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript received...

...Chao Liang; Darshil R. Patel; Maulik R. Shelat To support an effort to setup an industrial scale production facility to produce metal substrates coated with porous boiling surface (PBS) coating to enhance boiling heat transfer performance of these metal substrates, an axisymmetric transient heat...

..., such that the encapsulation of the ice structure, around and underneath the piece, fixates it form-fitted. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript received October 30, 2017; final manuscript received...

...Hosny Z. Abou-Ziyan; Issa F. Almesri; Mosab A. Alrahmani; Jaber H. Almutairi This paper reports the local multifaceted and area-averaged convective heat transfer coefficients (CHTCs) of longitudinal and transverse bricks arranged in lattice brick setting in tunnel kilns, using a three-dimensional...

.... Thermal boundary condition of the spindle system has been obtained using the heat transfer theory. Thermal model of the spindle system with tilting pad bearing has been built with the finite element method in order to calculate its temperature and thermal displacement distribution. Effects...

... in this paper has some significant usefulness for in-depth exploration of the characteristics of regenerative heating furnaces for steel pipes. 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING...

... , H 2 O vapor, and O 2 ) distributions of each subzone were evaluated. The computational fluid dynamics (CFD) approach was employed to simulate the flow, temperature profile, and heat transfer. The realizable k– ε model was applied for turbulence simulation of the fluid flow coming from the burners...

... non-Darcy model. Results are obtained for four casting speeds varying from 40 to 100 mm/min. The metal–mold contact region, as well as the convective heat transfer coefficient at the mold wall, is also varied. In addition to the above, the Darcy number for the porous media is also changed. All...

... of the inlet heat flux. It takes 10 h to release the absorbed heat flux. However, the PCM layer, practically, does not have an effect on the surface temperatures and absorbed heat fluxes, when it is placed far from the heat source. Contributed by the Heat Transfer Division of ASME for publication...

.... The flow structure, heat transfer characteristics, and the pumping power have been investigated for different jet positions. The results show that the jet position affects significantly the flow structure, as well as the heat transfer characteristics. According to the results of average heat transfer...

...Nitin Kumar Lautre; Apurbba Kumar Sharma; Shantanu Das; Pradeep Kumar 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript received January 9, 2015; final manuscript...

...M. R. Salem; R. K. Ali; R. Y. Sakr; K. M. Elshazly This study presents an experimental investigation of the characteristics of convective heat transfer in horizontal shell and coil heat exchangers in addition to the friction factor for fully developed flow through their helically coiled tube (HCT...

...Mainul Hasan; Latifa Begum 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript received August 5, 2014; final manuscript received November 28, 2014; published online...

... been individually investigated. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript received July 24, 2014; final manuscript received December 5, 2014; published online January 13, 2015. Assoc...

... to a thermal shock caused through a periodically sudden movement of cutting edge over the workpiece. To make a realistic estimation, the problem is considered one dimensional, according to the simplified mechanical model shown in Fig. 2 [ 23 , 24 ]. Although the heat transfer in the tool edge region...

...Lian Ning; Dong Fu; Chenn Q. Zhou; Jiemin Zhou Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript received June 24, 2014; final manuscript received September 29, 2014; published online...