...Makoto Higuchi The fatigue life of carbon and low alloy steels decreases with reduction in strain rate in high temperature water such as in the case of a light water reactor coolant. The fatigue life reduction also depends on temperature and dissolved oxygen. The fatigue life correction factor F en...

... August 2003 01 November 2003 18 08 2004 internal stresses finite element analysis drops water jets aluminium alloys elastoplasticity shot peening Effects of the impacting high pressure waterjets on solid targets have interested researchers for some time. This interest...

...Tsutomu Kawamura; Toshitsugu Nakao; Masanori Takahashi; Masaaki Hayashi; Kouichi Murayama; Nobuho Gotoh Synchronized vibrations of a circular cylinder in a water cross flow at supercritical Reynolds numbers were measured. Turbulence intensities were varied to investigate the effect of the Strouhal...

...Akihiko Hirano; Michiyoshi Yamamoto; Katsumi Sakaguchi; Tetsuo Shoji, Professor,; Kunihiro Iida, Professor Emeritus, The flow rate of water flowing on a steel surface is considered to be one of the important factors strongly influencing the fatigue life of the steel, because the water flow produces...

... manuscript received November 2, 2001. Associate Editor: G. Hulbert. 16 August 2000 02 November 2001 01 05 2002 air pollution air pollution control pressure vessels stress analysis machining performance evaluation water leak detection finite element analysis Fixing...

...Mohamed Hashish, Fellow ASME Waterjet technology development for 600-MPa (87-Ksi) operations involves efforts on machining process development, pumps, plumbing, nozzles, and machining systems development. In this paper, data will be presented on cutting with water and abrasive waterjet...

...Atsushi Okajima; Takashi Kosugi; Akira Nakamura Flow-induced in-line oscillation of a circular cylinder has been experimentally studied by free-oscillation tests in a water tunnel. Response amplitudes of a circular cylinder have been measured for determining the values of the reduced mass-damping...

...M. Itatani; M. Asano; M. Kikuchi; S. Suzuki; K. Iida,, Professor Emeritus of The University of Tokyo Fatigue crack growth data obtained in the simulated BWR water environment were analyzed to establish a formula for reference fatigue crack growth rate (FCGR) of austenitic stainless steels in BWR...