... (both in the axial and hoop directions) higher in the heat affected zone (HAZ) than in the weld pool (300 against 160 MPa). A considerable degree of relaxation annealing was observed by neutron diffraction after the application of the heat treatment. In this case, the hoop stress in the HAZ relaxes from...

... 1008/1010 steel. T-shaped slots were cut from each edge of each specimen in order to provide a uniaxial tension stress field in the area of investigation. After the plates were stress-relieved by annealing, the transverse slots were then welded and allowed to cool. Strain gages were applied...

...Martin J. Pechersky, Advisory Engineer,; Chandra S. Vikram, Research Professor, The measurement of residual stresses by laser annealing and electronic speckle pattern interferometry has been successful for moderate to high stress levels. However, for lower stress levels, say less than 80% of yield...

...Keiji Nakacho, Associate Professor Stress-relief annealing (SR treatment) is often applied to relieve welding residual stresses in the fabrication process of pressure vessels, etc. This study aims at development of an efficient method as simple as hand calculation to estimate reduction of residual...

...Keiji Nakacho, Associate Professor, Stress-relief annealing (SR treatment) is often applied to relieve welding residual stresses in the fabrication process of pressure vessels, etc. This study aims at development of an efficient method as simple as hand calculation to estimate reduction of residual...