.... The study examines: (i) how the data were obtained (analytically, experimentally, and/or numerically), (ii) the type of material from which the shell structures were made, and (iii) the importance of findings of the previous works. Metallic and composite components are considered. Review...

... pressure engineering Inelastic analysis Life extension Metals Fracture prediction Boundary element methods Design Non-metals Stress analysis of pressure vessels has vast applications in industries such as mechanical, chemical, aerospace, and energy storage, and as such has received...

... online May 21, 2018. Assoc. Editor: Steve J. Hensel. 15 01 2018 20 04 2018 Fabrication Fatigue Finite element methods High pressure engineering Inelastic analysis Life extension Metals Fracture prediction Boundary element methods Non-metals Innovation...

... Development for 508 LAS Base Metal and 316 SS Similar Metal Weld Under In-Air and PWR Primary Loop Water Conditions,” Argonne National Laboratory, Lemont, IL, Report No. ANL/LWRS-15/02 . https://www.osti.gov/biblio/1224989-tensile-fatigue-testing-material-hardening-model-development-las-base-metal-ss-similar...

.... , and Rotter , J. M. , 2004 , Buckling of Thin Metal Shells , Spon Press , London . [13] Burgos , C. A. , Batista-Abreu , J. C. , Calabró , H. D. , Jaca , R. C. , and Godoy , L. A. , 2015 , “ Buckling Estimates for Oil Storage Tanks: Effect of Simplified Modeling of the Roof...

... temperature analysis Metals Design Non-metals Cooling rate of weldment depends on weld thermal cycle which consists of very rapid heating to peak temperature followed by relatively fast cooling to ambient temperature. The cooling rate depends on weld heat input (current, voltage, travel speed...

... of perfectly embedded grains; it is therefore difficult to measure their crystal orientations and geometries. Analysis of the elastic and plastic deformation behaviors of polycrystalline metal remains difficult without the use of mechanical experiments. Fig. 9 Height change of surface grains under...

... are assumed to be varied continuously in the thickness direction according to a simple power law distribution in terms of the volume fraction of a ceramic and a metal. The governing equations are derived based on the first-order shear deformation theory, which accounts for through the thickness shear...

... . https://www.epri.com/#/pages/product/000000003002003472/ [2] Kimura , K. , and Yaguchi , M. , 2016 , “ Re-Evaluation of Long-Term Creep Strength of Base Metal of ASME Grade 91 Type Steel ,” ASME Paper No. PVP2016-63355. 10.1115/PVP2016-63355 [3] Swindeman , R. , and Foulds...

... Metals PVP materials Safety Reliability Non-metals The U.S. nuclear power industry has requested approval to use HDPE in safety-related nuclear piping for service water applications. In support of this work, the ASME Boiler and Pressure Vessel Code (BPVC) Committee published the 2015 ASME...

.... Almost every structure in such studies was constructed using metals such as steels. Those papers are too many to be cited here. However, the density of steels is much greater than the density of water, while the density of a polymer composite is comparable to the water density. As a result, the effect...

... of residual stress in a dissimilar weld between 0Cr18Ni9 steel and 20 low carbon steel with Inconel 182 weld metal, by using neutron diffraction, X-ray diffraction measurement and finite-element method (FEM). The residual stresses show asymmetric distribution due to the dissimilar materials. The maximum...

... in the J OURNAL OF P RESSURE V ESSEL T ECHNOLOGY . Manuscript received February 12, 2016; final manuscript received March 18, 2016; published online August 5, 2016. Assoc. Editor: Haofeng Chen. 12 02 2016 18 03 2016 Elevated temperature analysis Metals Design Non-metals...

... detailed finite element analyses of metallic cylinders as well as the analytical analysis. Then, a set of experimental tests were undertaken for aluminum alloy cylinders in order to evaluate experimental failure strength against the numerical and analytical results. Finally, composite cylinders made...

... in the J OURNAL OF P RESSURE V ESSEL T ECHNOLOGY . Manuscript received June 10, 2015; final manuscript received March 2, 2016; published online July 18, 2016. Editor: Young W. Kwon. 10 06 2015 02 03 2016 Durability Finite element Inelastic analysis Metals Seismic analysis...

...Pierre Mertiny; Young Kwon 30 05 2016 31 05 2016 Metals Non-metals Composite materials are increasingly used in various industrial applications because of their beneficial properties. This trend also includes pressure vessels and pipes, which are produced in growing...

... Metals PVP materials Non-metals The NUL and manufacturing defects have a significant impact on casing collapse resistance. Moreover, both API 5C3 collapse model and new ISO collapse model cannot be used to calculate and predict casing collapse resistance under NUL [ 17 , 18 ]. Hence...

... in the United States. Approved for public release; distribution is unlimited. 27 07 2015 03 01 2016 Durability Finite element Fluid-structure interaction Metals Safety Seismic analysis Boundary element methods Reliability Non-metals Storage tanks have been used commonly...

... 2015 14 01 2016 Metals Property databases Non-metals Creep strength enhance ferritic (CSEF) steels have been used extensively in ultra-super-critical (USC) power generation plants. Modified 9Cr–1Mo–V–Nb steel (referred to as Gr.91 steel hereafter) is representative of such CSEF...

... [11] Silva , I . C. , Silva , L. L. , Silva , R. S. , Rebello , J. M. A. , and Bruno , A. C. , 2007 , “ Carburization of Ethylene Pyrolysis Tubes Determined by Magnetic Measurements and Genetic Algorithm ,” Scr. Metall. , 56 ( 4 ), pp. 317 – 320 . 10.1016/j.scriptamat...