Volume 121 Issue 1 | J. Pressure Vessel Technol.

Skip Nav Destination

Volume 121, Issue 1

February 1999

ISSN 0094-9930

EISSN 1528-8978

Research Papers

Fracture Analysis of the Heat-Affected Zone in the NESC-1 Spinning Cylinder Experiment

J. A. Keeney

J. Pressure Vessel Technol. February 1999, 121(1): 1–5. doi: https://doi.org/10.1115/1.2883662

Abstract

View articletitled, Fracture Analysis of the Heat-Affected Zone in the NESC-1 Spinning Cylinder Experiment

Open the PDF for in another window

Topics: Cylinders , Fracture (Materials) , Heat , Spin (Aerodynamics) , Spinning (Textile) , Cladding systems (Building) , Engineering standards , Finite element analysis , Reactor vessels , Shock (Mechanics)

Fatigue Strength Reduction Factors for Welds Based on Nondestructive Examination

J. L. Hechmer, E. J. Kuhn, III

J. Pressure Vessel Technol. February 1999, 121(1): 6–10. doi: https://doi.org/10.1115/1.2883669

Abstract

View articletitled, Fatigue Strength Reduction Factors for Welds Based on Nondestructive Examination

Open the PDF for in another window

Topics: Fatigue strength , Nondestructive evaluation , Welded joints , Testing , Metals , Base metals , Pressure vessels , Fatigue life , Magnetic particles , Ultrasonic testing

A Simple Estimating Method for Reduction of Welding Residual Stresses in Thick Welded Joint From Stress-Relief Annealing—Part II: The Characteristics of Reduction of Welding Residual Stresses in Very Thick Joints During SR Treatment

K. Nakacho, Y. Ueda

J. Pressure Vessel Technol. February 1999, 121(1): 11–16. doi: https://doi.org/10.1115/1.2883659

Abstract

View articletitled, A Simple Estimating Method for Reduction of Welding Residual Stresses in Thick Welded Joint From Stress-Relief Annealing—Part II: The Characteristics of Reduction of Welding Residual Stresses in Very Thick Joints During SR Treatment

Open the PDF for in another window

Topics: Annealing , Residual stresses , Stress , Welded joints , Welding , Relaxation (Physics) , Boundary-value problems , Creep , Finite element methods , Manufacturing

Limit Loads for Pipe Elbows Subjected to In-Plane Opening Moments and Internal Pressure

M. A. Shalaby, M. Y. A. Younan

J. Pressure Vessel Technol. February 1999, 121(1): 17–23. doi: https://doi.org/10.1115/1.2883661

Abstract

View articletitled, Limit Loads for Pipe Elbows Subjected to In-Plane Opening Moments and Internal Pressure

Open the PDF for in another window

Topics: Pipes , Pressure , Stress , Collapse , Deflection , Deformation , Finite element analysis , Pipe bends

Applications of Iterative Elastic Techniques for Elastic-Plastic Analysis of Pressure Vessels

A. I. Mohamed, M. M. Megahed, L. S. Bayoumi, M. Y. A. Younan

J. Pressure Vessel Technol. February 1999, 121(1): 24–29. doi: https://doi.org/10.1115/1.2883663

Abstract

View articletitled, Applications of Iterative Elastic Techniques for Elastic-Plastic Analysis of Pressure Vessels

Open the PDF for in another window

Topics: Pressure vessels , Stress , Pressure , Elastic moduli , Nozzles , Pipes , Spherical shells , Temperature gradient , Thrust , Yield strength

Seismic Hazard and Damages—Avoiding Disaster Through Simulation, Experiment, and Experience

H. Shibata

J. Pressure Vessel Technol. February 1999, 121(1): 30–36. doi: https://doi.org/10.1115/1.2883664

Abstract

View articletitled, Seismic Hazard and Damages—Avoiding Disaster Through Simulation, Experiment, and Experience

Open the PDF for in another window

Topics: Damage , Disasters , Earthquake risk , Simulation experiments , Design , Mechanical engineering , Nuclear power stations , Piping systems , Dynamic analysis , Earthquake resistant design

On the Evaluation of Dynamic Stresses in Pipelines Using Limited Vibration Measurements and FEA in the Time Domain

W. A. Moussa, A. N. AbdelHamid

J. Pressure Vessel Technol. February 1999, 121(1): 37–41. doi: https://doi.org/10.1115/1.2883665

Abstract

View articletitled, On the Evaluation of Dynamic Stresses in Pipelines Using Limited Vibration Measurements and FEA in the Time Domain

Open the PDF for in another window

Topics: Finite element analysis , Pipelines , Stress , Vibration measurement , Finite element methods , Computer simulation , Density , Design , Errors , Pipes

Notch and Temperature Effects on Crack Propagation in SS 304 Under LCF Conditions

N. Merah, T. Bui-Quoc, M. Bernard

J. Pressure Vessel Technol. February 1999, 121(1): 42–48. doi: https://doi.org/10.1115/1.2883666

Abstract

View articletitled, Notch and Temperature Effects on Crack Propagation in SS 304 Under LCF Conditions

Open the PDF for in another window

Topics: Crack propagation , Fatigue cracks , Finite element analysis , Flow (Dynamics) , Fracture (Materials) , Fracture mechanics , Plates (structures) , Stress , Temperature , Temperature effects

Remote Identification of Impact Forces on Loosely Supported Tubes: Analysis of Multi-Supported Systems

M. Paulino, J. Antunes, P. Izquierdo

J. Pressure Vessel Technol. February 1999, 121(1): 61–70. doi: https://doi.org/10.1115/1.2883668

Abstract

View articletitled, Remote Identification of Impact Forces on Loosely Supported Tubes: Analysis of Multi-Supported Systems

Open the PDF for in another window

Topics: Clearances (Engineering) , Condensers (steam plant) , Damping , Flow (Dynamics) , Heat exchangers , Transducers , Traveling waves , Waves

On the Choice of Initial Geometric Imperfections in Externally Pressurized Shells

J. Błachut, O. R. Jaiswal

J. Pressure Vessel Technol. February 1999, 121(1): 71–76. doi: https://doi.org/10.1115/1.2883670

Abstract

View articletitled, On the Choice of Initial Geometric Imperfections in Externally Pressurized Shells

Open the PDF for in another window

Topics: Shells , Buckling , Cross section (Physics) , Load bearing capacity , Shapes , Steel , Yield point

Acoustic Emission Waveform Analysis From Weld Defects in Steel Ring Samples

M. Shiwa, A. Yamaguchi, M. Sato, S. Murao, M. Nagai

J. Pressure Vessel Technol. February 1999, 121(1): 77–83. doi: https://doi.org/10.1115/1.2883671

Abstract

View articletitled, Acoustic Emission Waveform Analysis From Weld Defects in Steel Ring Samples

Open the PDF for in another window

Topics: Acoustic emissions , Steel , Waveform analysis , Welding , Dipoles (Electromagnetism) , Signals , Brittleness , Fracture (Materials) , Pipes , Porosity

Analysis of Thermal Stresses in a Boiler Drum During Start-Up

J. Taler, B. We˛glowski, W. Zima, S. Gra˛dziel, M. Zborowski

J. Pressure Vessel Technol. February 1999, 121(1): 84–93. doi: https://doi.org/10.1115/1.2883672

Abstract

View articletitled, Analysis of Thermal Stresses in a Boiler Drum During Start-Up

Open the PDF for in another window

Topics: Boilers , Thermal stresses , Finite element methods , Heat conduction , Temperature , Temperature distribution , Vessels , Boundary-value problems , Fluids , Heat transfer coefficients

A High-Order Theory for Dynamic Buckling and Postbuckling Analysis of Laminated Cylindrical Shells

M. R. Eslami, M. Shariyat

J. Pressure Vessel Technol. February 1999, 121(1): 94–102. doi: https://doi.org/10.1115/1.2883673

Abstract

View articletitled, A High-Order Theory for Dynamic Buckling and Postbuckling Analysis of Laminated Cylindrical Shells

Open the PDF for in another window

Topics: Buckling , Pipes , Composite materials , Constitutive equations , Deformation , Equations of motion , Hamilton's principle , Materials properties , Nonlinear equations , Shear deformation

Linearization Techniques for Seismic Analysis of Piping System on Friction Support

G. R. Reddy, K. Suzuki, T. Watanabe, S. C. Mahajan

J. Pressure Vessel Technol. February 1999, 121(1): 103–108. doi: https://doi.org/10.1115/1.2883656

Abstract

View articletitled, Linearization Techniques for Seismic Analysis of Piping System on Friction Support

Open the PDF for in another window

Topics: Friction , Linearization techniques , Piping systems , Seismic analysis , Damping , Design , Displacement , Earthquakes , Excitation , Pipes

Low-Cycle Fatigue Behavior of a Nickel-Based Alloy Under Combined Bending/Tension Loading

D. Julien, T. Bui-Quoc, M. Bernard, N. R. Saad, H. Luan Nguyen

J. Pressure Vessel Technol. February 1999, 121(1): 109–115. doi: https://doi.org/10.1115/1.2883657

Abstract

View articletitled, Low-Cycle Fatigue Behavior of a Nickel-Based Alloy Under Combined Bending/Tension Loading

Open the PDF for in another window

Topics: Alloys , Low cycle fatigue , Nickel , Tension , Stress , Fatigue cracks , Bending (Stress) , Displacement , Fatigue , Fatigue testing

Compressive Thermal Yielding Leading to Hydrogen Cracking in a Fired Cannon

J. H. Underwood, A. P. Parker, P. J. Cote, S. Sopok

J. Pressure Vessel Technol. February 1999, 121(1): 116–120. doi: https://doi.org/10.1115/1.2883658

Abstract

View articletitled, Compressive Thermal Yielding Leading to Hydrogen Cracking in a Fired Cannon

Open the PDF for in another window

Topics: Artillery , Hydrogen embrittlement , Cracking (Materials) , Fracture (Materials) , Fracture (Process) , Temperature , Steel , Stress , Firing , Residual stresses

Review Articles

Overview of Fatigue Crack Initiation in Carbon and Low-Alloy Steels in Light Water Reactor Environments

O. K. Chopra, W. J. Shack

J. Pressure Vessel Technol. February 1999, 121(1): 49–60. doi: https://doi.org/10.1115/1.2883667

Abstract

View articletitled, Overview of Fatigue Crack Initiation in Carbon and Low-Alloy Steels in Light Water Reactor Environments

Open the PDF for in another window

Topics: Alloys , Carbon , Fatigue cracks , Light water reactors , Steel , Fatigue , Fracture (Materials) , Design , Coolants , Fatigue life

Research Papers

Fracture Analysis of the Heat-Affected Zone in the NESC-1 Spinning Cylinder Experiment

Fatigue Strength Reduction Factors for Welds Based on Nondestructive Examination

A Simple Estimating Method for Reduction of Welding Residual Stresses in Thick Welded Joint From Stress-Relief Annealing—Part II: The Characteristics of Reduction of Welding Residual Stresses in Very Thick Joints During SR Treatment

Limit Loads for Pipe Elbows Subjected to In-Plane Opening Moments and Internal Pressure

Applications of Iterative Elastic Techniques for Elastic-Plastic Analysis of Pressure Vessels

Seismic Hazard and Damages—Avoiding Disaster Through Simulation, Experiment, and Experience

On the Evaluation of Dynamic Stresses in Pipelines Using Limited Vibration Measurements and FEA in the Time Domain

Notch and Temperature Effects on Crack Propagation in SS 304 Under LCF Conditions

Remote Identification of Impact Forces on Loosely Supported Tubes: Analysis of Multi-Supported Systems

On the Choice of Initial Geometric Imperfections in Externally Pressurized Shells

Acoustic Emission Waveform Analysis From Weld Defects in Steel Ring Samples

Analysis of Thermal Stresses in a Boiler Drum During Start-Up

A High-Order Theory for Dynamic Buckling and Postbuckling Analysis of Laminated Cylindrical Shells

Linearization Techniques for Seismic Analysis of Piping System on Friction Support

Low-Cycle Fatigue Behavior of a Nickel-Based Alloy Under Combined Bending/Tension Loading

Compressive Thermal Yielding Leading to Hydrogen Cracking in a Fired Cannon

Review Articles

Overview of Fatigue Crack Initiation in Carbon and Low-Alloy Steels in Light Water Reactor Environments

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Review Articles

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only