Skip Nav Destination
Issues
August 1992
ISSN 0094-9930
EISSN 1528-8978
In this Issue
Research Papers
Heavy-Section Steel Technology Program: Fracture Issues (Survey Paper)
J. Pressure Vessel Technol. August 1992, 114(3): 255–264.
doi: https://doi.org/10.1115/1.2929039
Numerical Modeling of Full-Scale Pipe Rupture Tests
J. Pressure Vessel Technol. August 1992, 114(3): 265–270.
doi: https://doi.org/10.1115/1.2929040
Topics:
Computer simulation
,
Pipes
,
Rupture
,
Fracture (Materials)
Stresses of Thick Perforated Plates With Reinforcement of Tubes and Their Effective Elastic Constants
J. Pressure Vessel Technol. August 1992, 114(3): 271–279.
doi: https://doi.org/10.1115/1.2929041
Topics:
Elastic constants
,
Plates (structures)
,
Stress
,
Design
,
Welding
Fatigue and Creep-Fatigue Life Evaluation of U-Shaped Bellows
J. Pressure Vessel Technol. August 1992, 114(3): 280–291.
doi: https://doi.org/10.1115/1.2929042
Topics:
Bellows (Equipment)
,
Creep
,
Fatigue
,
Evaluation methods
,
Damage
,
High temperature
,
Relaxation (Physics)
,
Shapes
,
Stress
On the Use of the Hole-Drilling Technique for Residual Stress Measurements in Thin Plates
J. Pressure Vessel Technol. August 1992, 114(3): 292–299.
doi: https://doi.org/10.1115/1.2929043
Topics:
Drilling
,
Plates (structures)
,
Stress
,
Gages
,
Residual stresses
,
Strain gages
,
Surface preparation
Practices in Adequate Structural Design (Design Paper)
J. Pressure Vessel Technol. August 1992, 114(3): 300–307.
doi: https://doi.org/10.1115/1.2929044
Topics:
Design
,
Structural design
Buckling Strength of Lining Shells of Pressure Vessels
J. Pressure Vessel Technol. August 1992, 114(3): 308–314.
doi: https://doi.org/10.1115/1.2929045
Topics:
Buckling
,
Linings (Textiles)
,
Pressure vessels
,
Shells
,
Displacement
,
Cavities
,
Computer software
,
External pressure
,
Bifurcation
,
Equilibrium (Physics)
Ratcheting of Pressurized Piping Subjected to Seismic Loading
J. Pressure Vessel Technol. August 1992, 114(3): 315–320.
doi: https://doi.org/10.1115/1.2929046
Topics:
Pipes
,
Finite element analysis
,
Stress
,
Materials properties
,
Plasticity
,
Pressure
Simplified Nonlinear Ratchet Model for Dynamic Analysis of Pressure Components
J. Pressure Vessel Technol. August 1992, 114(3): 321–327.
doi: https://doi.org/10.1115/1.2929047
Topics:
Dynamic analysis
,
Pressure
,
Computation
,
Ductility
Inelastic Pipework Dynamics and Aseismic Design
J. Pressure Vessel Technol. August 1992, 114(3): 328–335.
doi: https://doi.org/10.1115/1.2929048
Topics:
Design
,
Dynamics (Mechanics)
,
Piping systems
,
Fatigue
,
Computer software
,
Damping
,
Dynamic response
,
Engineering design processes
,
Stress
,
Yield point
Multiple Stability Boundaries of Tubes in a Normal Triangular Cylinder Array
J. Pressure Vessel Technol. August 1992, 114(3): 336–343.
doi: https://doi.org/10.1115/1.2929049
Topics:
Cylinders
,
Stability
,
Damping
,
Excitation
,
Flow (Dynamics)
,
Flow visualization
,
Fluid dynamics
,
Levers
,
Nonlinear vibration
Nondestructive Evaluation of Adhesively Bonded Joints in Graphite/Epoxy Composites Using Acousto-Ultrasonics
J. Pressure Vessel Technol. August 1992, 114(3): 344–352.
doi: https://doi.org/10.1115/1.2929050
Buckling of Shear Deformable Antisymmetric Angle-Ply Laminated Cylindrical Panels Under Axial Compression (Design Paper)
J. Pressure Vessel Technol. August 1992, 114(3): 353–357.
doi: https://doi.org/10.1115/1.2929051
Topics:
Buckling
,
Compression
,
Design
,
Shear (Mechanics)
,
Shells
,
Flat plates
,
Composite materials
,
Differential equations
,
Geometry
,
Shear deformation
Analysis of Composite Plates Containing Cracks
J. Pressure Vessel Technol. August 1992, 114(3): 358–363.
doi: https://doi.org/10.1115/1.2929052
A New Correlation Between MC Precipitate Size, Aging Time and Temperature for an Advanced Austenitic Steel
J. Pressure Vessel Technol. August 1992, 114(3): 364–368.
doi: https://doi.org/10.1115/1.2929053
Topics:
Steel
,
Temperature
,
Dislocation density
,
Dislocations
,
Nucleation (Physics)
Pressure Vessel and Piping Codes
RTP-1: A Standard for Reinforced Plastic Corrosion-Resistant Equipment
J. Pressure Vessel Technol. August 1992, 114(3): 369–375.
doi: https://doi.org/10.1115/1.2929054
Topics:
Corrosion
,
Reinforced thermoset plastics
,
Design
,
Inspection
,
Manufacturing
,
Vessels
,
Testing
,
Chemical processes
,
Engineering standards
,
Failure
Technical Briefs
Transformation Plasticity Effects on Residual Stresses in a Butt-Welded Pipe
J. Pressure Vessel Technol. August 1992, 114(3): 376–378.
doi: https://doi.org/10.1115/1.2929055
Topics:
Pipes
,
Plasticity
,
Residual stresses
Criteria of Leakage Occurrence and Pressure Vessel Failure as Applied to Reactors
J. Pressure Vessel Technol. August 1992, 114(3): 378–380.
doi: https://doi.org/10.1115/1.2929056
Topics:
Failure
,
Leakage
,
Pressure vessels
Galerkin Finite Element Displacement Formulation of Coupled Thermoelasticity Spherical Problems
J. Pressure Vessel Technol. August 1992, 114(3): 380–384.
doi: https://doi.org/10.1115/1.2929057
Email alerts
RSS Feeds
Surface Strain Measurement for Non-Intrusive Internal Pressure Evaluation of A Cannon
J. Pressure Vessel Technol
The Upper Bound of the Buckling Stress of Axially Compressed Carbon Steel Circular Cylindrical Shells
J. Pressure Vessel Technol (December 2024)
Crack Growth Prediction Based on Uncertain Parameters Using Ensemble Kalman Filter
J. Pressure Vessel Technol (December 2024)
Machine Learning Modelling for Predicting Tensile Strain Capacity of Pipelines and Identifying Key Factors
J. Pressure Vessel Technol
Defect Detection of Polyethylene Gas Pipeline Based on Convolutional Neural Networks and Image Processing
J. Pressure Vessel Technol
