Skip Nav Destination
Issues
May 1985
ISSN 0094-9930
EISSN 1528-8978
In this Issue
Research Papers
Plastic Buckling of Short Vertical Cylindrical Shells Subjected to Horizontal Edge Shear Loads
J. Pressure Vessel Technol. May 1985, 107(2): 101–106.
doi: https://doi.org/10.1115/1.3264420
Seismic Response Analysis of Cylindrical Tanks With Initial Irregularities on Side Walls
J. Pressure Vessel Technol. May 1985, 107(2): 107–117.
doi: https://doi.org/10.1115/1.3264421
Topics:
Design
,
Hoop stress
,
Kinematics
,
Pressure
,
Shapes
,
Vibrational modes
A Simplified Finite Element for Added Mass and Inertial Coupling in Arrays of Cylinders
J. Pressure Vessel Technol. May 1985, 107(2): 118–125.
doi: https://doi.org/10.1115/1.3264422
Topics:
Cylinders
,
Finite element analysis
,
Fluids
,
Damping
,
Excitation
,
Finite element model
,
Flow (Dynamics)
,
Modeling
,
Transients (Dynamics)
A Finite Element Model for General Thick-Walled Shell Structures
J. Pressure Vessel Technol. May 1985, 107(2): 126–133.
doi: https://doi.org/10.1115/1.3264424
Topics:
Finite element model
,
Shells
,
Finite element analysis
,
Stress
The Bending of an Orthotropic Membrane Wall Supported at Arbitrary Points
J. Pressure Vessel Technol. May 1985, 107(2): 134–141.
doi: https://doi.org/10.1115/1.3264425
Topics:
Membranes
,
Boilers
,
Furnaces
,
Heating boilers
,
Plates (structures)
,
Power stations
,
Stress
Seismic Damping Factors of Small Bore Piping as Influenced by Insulation and Support Elements
J. Pressure Vessel Technol. May 1985, 107(2): 142–147.
doi: https://doi.org/10.1115/1.3264426
Topics:
Damping
,
Insulation
,
Pipes
,
Design
,
Liquid metal fast breeder reactors
,
Piping systems
,
Excitation
,
Transients (Dynamics)
,
Weight (Mass)
A Simplified Analysis Method for Complex Piping Systems in Elastic-Plastic-Creep Range
J. Pressure Vessel Technol. May 1985, 107(2): 148–156.
doi: https://doi.org/10.1115/1.3264427
A Procedure to Incorporate Effects of Seismic Events in a Quasi-Static Piping System Inelastic Analysis
J. Pressure Vessel Technol. May 1985, 107(2): 157–164.
doi: https://doi.org/10.1115/1.3264428
Buckling Design Analysis for Impact Evaluation
J. Pressure Vessel Technol. May 1985, 107(2): 165–171.
doi: https://doi.org/10.1115/1.3264429
Safety Valve Dynamic Instability: An Analysis of Chatter
J. Pressure Vessel Technol. May 1985, 107(2): 172–177.
doi: https://doi.org/10.1115/1.3264430
Topics:
Chatter
,
Safety
,
Valves
,
Algebra
,
Design
,
Differential equations
,
Disks
,
Oscillations
Determination of Residual Stresses due to Girth-Butt Welds in Pipes
J. Pressure Vessel Technol. May 1985, 107(2): 178–184.
doi: https://doi.org/10.1115/1.3264431
Topics:
Pipes
,
Residual stresses
,
Welded joints
,
Finite element analysis
,
Stress
,
X-ray diffraction
X-Ray Diffraction Measurement of Residual Stresses in Thick, Multi-Pass Steel Weldments
J. Pressure Vessel Technol. May 1985, 107(2): 185–191.
doi: https://doi.org/10.1115/1.3264432
Application of the Failure Assessment Diagram to the Evaluation of Pressure-Temperature Limits for a Pressurized Water Reactor
J. Pressure Vessel Technol. May 1985, 107(2): 192–196.
doi: https://doi.org/10.1115/1.3264433
Power/Response Spectrum Transformations in Equipment Qualification
J. Pressure Vessel Technol. May 1985, 107(2): 197–202.
doi: https://doi.org/10.1115/1.3264434
Topics:
Equipment qualification
,
Spectra (Spectroscopy)
,
Damping
,
Linear systems
,
Resolution (Optics)
,
Signals
,
Stress
Errata
Erratum: “Minimum Mass Design of Boiler Drums by Nonlinear Programming” (Journal of Pressure Vessel Technology, 1985, 107, pp. 83–87)
J. Pressure Vessel Technol. May 1985, 107(2): 125.
doi: https://doi.org/10.1115/1.3264423
Topics:
Boilers
,
Design
,
Nonlinear programming
,
Pressure vessels
Technical Briefs
Closed Form Expressions for Fracture Mechanics Analysis of Cracked Pipes
J. Pressure Vessel Technol. May 1985, 107(2): 203–205.
doi: https://doi.org/10.1115/1.3264435
Topics:
Fracture mechanics
,
Pipes
,
Fracture (Materials)
,
Pressure
,
Stress
,
Tension
,
Wall thickness
Stresses in Spherical Shells Due to Local Loadings Over a Rectangular Area
J. Pressure Vessel Technol. May 1985, 107(2): 205–207.
doi: https://doi.org/10.1115/1.3264436
Topics:
Spherical shells
,
Stress
,
Bending (Stress)
,
Membranes
,
Shear (Mechanics)
Fundamental Frequencies of U-Tubes in Tube Bundles
J. Pressure Vessel Technol. May 1985, 107(2): 207–209.
doi: https://doi.org/10.1115/1.3264437
Topics:
Density
,
Dimensionless numbers
,
Geometry
,
Heat exchangers
,
Inertia (Mechanics)
,
Poisson ratio
,
Symmetry (Physics)
,
Vibration
,
Young's modulus
Email alerts
RSS Feeds
Latent Pitfalls in Microstructure-Based Modeling for Thermally Aged 9Cr-1Mo-V Steel (Grade 91)
J. Pressure Vessel Technol
Thermal Stress Analysis of Compact Heat Exchanger Produced by Additive Manufacturing
J. Pressure Vessel Technol
An Improved Model for Predicting Affected Region of Flashing Jet
J. Pressure Vessel Technol
Crack Growth Prediction Based on Uncertain Parameters Using Ensemble Kalman Filter
J. Pressure Vessel Technol
Experimental Research on Thermal-Oxidative Aging Performance of Polyethylene Pipe Under Hydrostatic Pressure
J. Pressure Vessel Technol
