Analytical solutions for the lateral buckling of pipelines exist for the case when the pipe material remains in the linearly elastic range. However for truly high temperatures and/or heavier flowlines, plastic deformation cannot be excluded. One then has to resort to finite element analyses, as no analytical solutions are available. This paper does not provide such an analytical solution, but it does show that if the finite element solution has been calculated once, then that solution can be scaled so that it applies for any other values of the design parameters. Thus the finite element solution need only be calculated once and for all. Thereafter, other solutions can be calculated by scaling the finite element solution using simple analytical formulas. However, the shape of the moment-curvature relation must not change. That is, the moment-curvature relation must be a scaled version of the moment-curvature relation for the reference problem, where different scale factors may be applied to the moment and curvature. This paper goes beyond standard dimensional analysis (as justified by the Bucklingham theorem), to establish a stronger scalability result, and uses it to develop simple formulas for the lateral buckling of any pipeline made of elastic-plastic material. The paper includes the derivation of the scaling result, the application procedure, the reference solution for an elastic-perfectly plastic pipe, and an example to illustrate how this reference solution can be used to calculate the lateral buckling response for any elastic-perfectly plastic pipe.
Skip Nav Destination
Article navigation
August 2009
Materials
Scaling of Solutions for the Lateral Buckling of Elastic-Plastic Pipelines
Ralf Peek
Shell International Exploration and Production
, B. V. Rijswijk, The Netherlands 2288 GS
Heedo Yun
Shell International Exploration and Production, Inc.
, Houston, TX 77079J. Offshore Mech. Arct. Eng. Aug 2009, 131(3): 031401 (9 pages)
Published Online: May 28, 2009
Article history
Received:
July 11, 2007
Revised:
August 27, 2008
Published:
May 28, 2009
Citation
Peek, R., and Yun, H. (May 28, 2009). "Scaling of Solutions for the Lateral Buckling of Elastic-Plastic Pipelines." ASME. J. Offshore Mech. Arct. Eng. August 2009; 131(3): 031401. https://doi.org/10.1115/1.3058689
Download citation file:
Get Email Alerts
Cited By
Numerical Modeling of Fish Cage Structural Responses in Regular and Irregular Waves Using Modified XPBD
J. Offshore Mech. Arct. Eng (April 2025)
Layout Optimization of Wave Energy Park Based on Multi-Objective Optimization Algorithm
J. Offshore Mech. Arct. Eng (August 2025)
Effects of Aerodynamic Damping and Gyroscopic Moments on Dynamic Responses of a Semi-Submersible Floating Vertical Axis Wind Turbine: An Experimental Study
J. Offshore Mech. Arct. Eng (April 2025)
Investigating the Impact of System Parameters on Flow-Induced Vibration Hard Galloping Based on Deep Neural Network
J. Offshore Mech. Arct. Eng (August 2025)
Related Articles
Critical Buckling Strain Equations for Energy Pipelines—A Parametric Study
J. Offshore Mech. Arct. Eng (August,2006)
Failure of Locally Buckled Pipelines
J. Pressure Vessel Technol (May,2007)
Effect of Misalignment and Weld Induced Residual Stresses on the Local Buckling Response of Pipelines
J. Pressure Vessel Technol (August,2011)
Cover Requirement and Stability of Horizontally Bent Buried Pipelines
J. Pressure Vessel Technol (April,2012)
Related Proceedings Papers
Related Chapters
STRUCTURAL RELIABILITY ASSESSMENT OF PIPELINE GIRTH WELDS USING GAUSSIAN PROCESS REGRESSION
Pipeline Integrity Management Under Geohazard Conditions (PIMG)
TENSILE STRAIN CAPACITY AFTER LOCAL BUCKLING OF HIGH STRAIN PIPELINE IN FULL-SCALE BENDING TESTS
Pipeline Integrity Management Under Geohazard Conditions (PIMG)
DEVELOPMENTS IN STRAIN-BASED FRACTURE ASSESSMENTS - A PERSPECTIVE
Pipeline Integrity Management Under Geohazard Conditions (PIMG)