Topics: Fatigue cracks , Steel , Yield strength , Fracture (Materials) , Cracking (Materials) , Cycles , Fracture (Process) , Heat , Mechanical properties , Stress

A Description of Crack Growth From Defects Under Creep Conditions

J. A. Williams, A. T. Price

J. Eng. Mater. Technol. July 1975, 97(3): 214–222. doi: https://doi.org/10.1115/1.3443288

Abstract

View articletitled, A Description of Crack Growth From Defects Under Creep Conditions

Open the PDF for in another window

Topics: Creep , Fracture (Materials) , Stress , Damage , Geometry

Deformation Characteristics and Time-Dependent Notch Sensitivity of Udimet 700 at Intermediate Temperatures

D. J. Wilson

J. Eng. Mater. Technol. July 1975, 97(3): 223–233. doi: https://doi.org/10.1115/1.3443289

Abstract

View articletitled, Deformation Characteristics and Time-Dependent Notch Sensitivity of Udimet 700 at Intermediate Temperatures

Open the PDF for in another window

Topics: Alloys , Creep , Deformation , Geometry , Investment castings , Particle size , Stress , Temperature , Yield strength

Creep-Rupture Properties, Resistance to Temper Embrittlement and to Attack by Hydrogen of a 1.4 Percent Mn — 0.25 Percent Mo — 0.03 Percent Cb Steel

T. Wada, D. L. Sponseller

J. Eng. Mater. Technol. July 1975, 97(3): 234–244. doi: https://doi.org/10.1115/1.3443290

Abstract

View articletitled, Creep-Rupture Properties, Resistance to Temper Embrittlement and to Attack by Hydrogen of a 1.4 Percent Mn — 0.25 Percent Mo — 0.03 Percent Cb Steel

Open the PDF for in another window

Topics: Creep , Embrittlement , Hydrogen , Rupture , Steel , Boilers , Carbon steel , Fracture toughness , Stress , Carbon

Effect of Residual Elements on Fracture Characteristics and Creep Ductility of Type 308 Stainless Steel Weld Metal

J. O. Stiegler, R. T. King, G. M. Goodwin

J. Eng. Mater. Technol. July 1975, 97(3): 245–250. doi: https://doi.org/10.1115/1.3443291

Abstract

View articletitled, Effect of Residual Elements on Fracture Characteristics and Creep Ductility of Type 308 Stainless Steel Weld Metal

Open the PDF for in another window

Topics: Creep , Ductility , Fracture (Materials) , Fracture (Process) , Metals , Stainless steel , Elongation , Ferrites (Magnetic materials)

Differential Testing and the Evaluation of Thermal Activation Parameters

J. G. Wagner

J. Eng. Mater. Technol. July 1975, 97(3): 251–258. doi: https://doi.org/10.1115/1.3443292

Abstract

View articletitled, Differential Testing and the Evaluation of Thermal Activation Parameters

Open the PDF for in another window

Topics: Aluminum , Constitutive equations , Deformation , Dislocation motion , Errors , Stress , Temperature , Testing , Thermomechanics

Influence of Specimen Features on the Strength of Boron/Epoxy-Reinforced Metal

C. T. Herakovich, M. P. Renieri, J. G. Davis, Jr.

J. Eng. Mater. Technol. July 1975, 97(3): 259–263. doi: https://doi.org/10.1115/1.3443293

Abstract

View articletitled, Influence of Specimen Features on the Strength of Boron/Epoxy-Reinforced Metal

Open the PDF for in another window

Topics: Boron , Epoxy adhesives , Epoxy resins , Metals , Stress , Aluminum , Composite materials , Gages , Glass reinforced plastics , Machining

Flexural Stiffness of Sandwich Beams

R. D. Adams, A. S. Weinstein

J. Eng. Mater. Technol. July 1975, 97(3): 264–270. doi: https://doi.org/10.1115/1.3443294

Abstract

View articletitled, Flexural Stiffness of Sandwich Beams

Open the PDF for in another window

Topics: Stiffness , Skin , Fiber reinforced plastics , Foundry coatings , Geometry , Laminates , Shear (Mechanics) , Shear stress , Stress

Determination of Dewetting Criterion for Nonlinear Solid Propellant Stress Analysis

G. H. Lindsey, J. E. Woods

J. Eng. Mater. Technol. July 1975, 97(3): 271–277. doi: https://doi.org/10.1115/1.3443295

Abstract

View articletitled, Determination of Dewetting Criterion for Nonlinear Solid Propellant Stress Analysis

Open the PDF for in another window

Topics: Propellants , Stress analysis (Engineering) , Stress

On the Speeds of Instability of a Rotating Hollow, Anisotropic Cylinder

J. G. Lenard

J. Eng. Mater. Technol. July 1975, 97(3): 278–283. doi: https://doi.org/10.1115/1.3443296

Abstract

View articletitled, On the Speeds of Instability of a Rotating Hollow, Anisotropic Cylinder

Open the PDF for in another window

Topics: Anisotropy , Cylinders , Stress , Fracture (Materials) , Fracture (Process) , Load bearing capacity , Yield strength

Technical Briefs

Ultimate Strength Versus Material Constant

K. M. Lal

J. Eng. Mater. Technol. July 1975, 97(3): 284–285. doi: https://doi.org/10.1115/1.3443297

View articletitled, Ultimate Strength Versus Material Constant

Open the PDF for in another window

Topics: Tensile strength

On the Correlation Between Friction-Coefficients and Adhesion Stresses

Bharat Bhushan, N. H. Cook

J. Eng. Mater. Technol. July 1975, 97(3): 285–287. doi: https://doi.org/10.1115/1.3443299

View articletitled, On the Correlation Between Friction-Coefficients and Adhesion Stresses

Open the PDF for in another window

Topics: Adhesion , Friction , Stress

Reports

NSF Workshop on Inelastic Constitutive Equations for Metals: Experimentation-Computation-Representation

E. Krempl

J. Eng. Mater. Technol. July 1975, 97(3): 288. doi: https://doi.org/10.1115/1.3443300

View articletitled, NSF Workshop on Inelastic Constitutive Equations for Metals: Experimentation-Computation-Representation

Open the PDF for in another window

Topics: Computation , Constitutive equations , Metals , Workshops (Work spaces)

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Investigating Microstructure and Wear Characteristics of Alloy Steels Used as Wear Plates in Ballast Cleaning Operation in Railways

J. Eng. Mater. Technol (January 2025)

MODELING GROWTH AND VISCOUS FLOW OF OXIDE ON CYLINDRICAL SILICON SURFACES INCLUDING PIEZOVISCOUS INHIBITION

J. Eng. Mater. Technol

Thermal Conductivity of 3D Printed Metal using Extrusion-based Metal Additive Manufacturing Process

J. Eng. Mater. Technol

Active Constrained Layer Damping of Beams With Natural Fiber Reinforced Viscoelastic Composites

J. Eng. Mater. Technol (January 2025)

High-Temperature Fatigue of Additively Manufactured Inconel 718: A Short Review

J. Eng. Mater. Technol (January 2025)

Editorial

Engineering Materials and Technology: Retrospect and Prospect

Research Papers

Fractographic Analysis of Fatigue Failures

Predictions of the Effect of Yield Strength on Fatigue Crack Growth Retardation in HP-9Ni-4Co-30C Steel

A Description of Crack Growth From Defects Under Creep Conditions

Deformation Characteristics and Time-Dependent Notch Sensitivity of Udimet 700 at Intermediate Temperatures

Creep-Rupture Properties, Resistance to Temper Embrittlement and to Attack by Hydrogen of a 1.4 Percent Mn — 0.25 Percent Mo — 0.03 Percent Cb Steel

Effect of Residual Elements on Fracture Characteristics and Creep Ductility of Type 308 Stainless Steel Weld Metal

Differential Testing and the Evaluation of Thermal Activation Parameters

Influence of Specimen Features on the Strength of Boron/Epoxy-Reinforced Metal

Flexural Stiffness of Sandwich Beams

Determination of Dewetting Criterion for Nonlinear Solid Propellant Stress Analysis

On the Speeds of Instability of a Rotating Hollow, Anisotropic Cylinder

Technical Briefs

Ultimate Strength Versus Material Constant

On the Correlation Between Friction-Coefficients and Adhesion Stresses

Reports

NSF Workshop on Inelastic Constitutive Equations for Metals: Experimentation-Computation-Representation

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Editorial

Research Papers

Technical Briefs

Reports

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only