Volume 133 Issue 3 | J. Eng. Mater. Technol.

Guest Editorial

Multiphysics Approaches for the Behavior of Polymer-Based Materials

Said Ahzi

J. Eng. Mater. Technol. July 2011, 133(3): 030301. doi: https://doi.org/10.1115/1.4004070

View articletitled, Multiphysics Approaches for the Behavior of Polymer-Based Materials

Topics: Polymers , Micromechanics (Engineering) , Nanocomposites , Rheology , Molecular dynamics methods , Solid-state phase transformations

Multi-Physics Approaches for the Behavior of Polymer-Based Materials

Coupling of Nanocavitation With Cyclic Deformation Behavior of High-Density Polyethylene Below the Yield Point

Kamel Hizoum, Yves Rémond, Stanislav Patlazhan

J. Eng. Mater. Technol. July 2011, 133(3): 030901. doi: https://doi.org/10.1115/1.4004047

Abstract

View articletitled, Coupling of Nanocavitation With Cyclic Deformation Behavior of High-Density Polyethylene Below the Yield Point

Open the PDF for in another window

Topics: Cycles , Deformation , Density , Polymers , Yield point , Stress , Cavitation

Measuring the Influence of Temperature on the Development of Elastic Anisotropy With Compressive Plastic Flow for Glassy Polycarbonate

A. Goel, Y. Wen, J. Hein, M. Negahban, J. A. Turner

J. Eng. Mater. Technol. July 2011, 133(3): 030902. doi: https://doi.org/10.1115/1.4004048

Abstract

View articletitled, Measuring the Influence of Temperature on the Development of Elastic Anisotropy With Compressive Plastic Flow for Glassy Polycarbonate

Open the PDF for in another window

Topics: Anisotropy , Deformation , Longitudinal waves , Temperature , Waves , Compression , Glass transition

Modifications of the Polylactic Acid Surface Properties by DBD Plasma Treatment at Atmospheric Pressure

C. Vergne, O. Buchheit, F. Eddoumy, E. Sorrenti, J. Di Martino, D. Ruch

J. Eng. Mater. Technol. July 2011, 133(3): 030903. doi: https://doi.org/10.1115/1.4004156

Abstract

View articletitled, Modifications of the Polylactic Acid Surface Properties by DBD Plasma Treatment at Atmospheric Pressure

Open the PDF for in another window

Topics: Plasmas (Ionized gases) , Hydrophilicity , Surface roughness , Atomic force microscopy , Surface energy

Quantification of Cavitation in Neat and Calcium Carbonate-Filled High-Density Polyethylene Subjected to Tension

F. Addiego, J. Di Martino, D. Ruch, A. Dahoun, O. Godard, S. Patlazhan

J. Eng. Mater. Technol. July 2011, 133(3): 030904. doi: https://doi.org/10.1115/1.4004046

Abstract

View articletitled, Quantification of Cavitation in Neat and Calcium Carbonate-Filled High-Density Polyethylene Subjected to Tension

Open the PDF for in another window

Topics: Cavitation , Cavities , Composite materials , Deformation , Density , Particulate matter , Polymers , Shapes , Tension , Fillers (Materials)

Modeling of the Stress–Birefringence–Stretch Behavior in Rubbers Using the Gent Model

A. K. Mossi Idrissa, S. Ahzi, Y. Rémond, J. Gracio

J. Eng. Mater. Technol. July 2011, 133(3): 030905. doi: https://doi.org/10.1115/1.4004053

Abstract

View articletitled, Modeling of the Stress–Birefringence–Stretch Behavior in Rubbers Using the Gent Model

Open the PDF for in another window

Topics: Chain , Double refraction , Modeling , Stress , Rubber , Anisotropy , Elasticity

Strategies for the Analysis of the Behavior of an Adhesive in Bonded Assemblies

Jean Yves Cognard, Romain Créac’hcadec, Laurent Sohier

J. Eng. Mater. Technol. July 2011, 133(3): 030906. doi: https://doi.org/10.1115/1.4004049

Abstract

View articletitled, Strategies for the Analysis of the Behavior of an Adhesive in Bonded Assemblies

Open the PDF for in another window

Topics: Adhesives , Shear (Mechanics) , Stress

Mechanical Behavior of Recycled Polypropylene Composites Under Tensile, Bending, and Creep Loading: Experimental and Modeling

Cécile Rogueda-Berriet, Nadia Bahlouli, Daniel Pessey, Yves Rémond

J. Eng. Mater. Technol. July 2011, 133(3): 030907. doi: https://doi.org/10.1115/1.4004051

Abstract

View articletitled, Mechanical Behavior of Recycled Polypropylene Composites Under Tensile, Bending, and Creep Loading: Experimental and Modeling

Open the PDF for in another window

Topics: Creep , Mechanical behavior , Modeling , Recycling , Recycled materials , Elastic moduli , Talc (Mineral) , Elasticity , Composite materials

Dynamic Mechanical Properties of PMMA/Organoclay Nanocomposite: Experiments and Modeling

Rodrigue Matadi Boumbimba, Said Ahzi, Nadia Bahlouli, David Ruch, José Gracio

J. Eng. Mater. Technol. July 2011, 133(3): 030908. doi: https://doi.org/10.1115/1.4004052

Abstract

View articletitled, Dynamic Mechanical Properties of PMMA/Organoclay Nanocomposite: Experiments and Modeling

Open the PDF for in another window

Topics: Modeling , Nanocomposites , Storage , Temperature , Mechanical properties

Research Papers

Fatigue Life Modeling of Anisotropic Materials Using a Multiaxial Notch Analysis

Z. J. Moore, R. W. Neu

J. Eng. Mater. Technol. July 2011, 133(3): 031001. doi: https://doi.org/10.1115/1.4004050

Abstract

View articletitled, Fatigue Life Modeling of Anisotropic Materials Using a Multiaxial Notch Analysis

Open the PDF for in another window

Topics: Anisotropy , Stress , Fatigue life , Superalloys , Finite element analysis , Modeling , Fatigue

Modeling of Oxygen Diffusion Along Grain Boundaries in a Nickel-Based Superalloy

L. G. Zhao

J. Eng. Mater. Technol. July 2011, 133(3): 031002. doi: https://doi.org/10.1115/1.4003777

Abstract

View articletitled, Modeling of Oxygen Diffusion Along Grain Boundaries in a Nickel-Based Superalloy

Open the PDF for in another window

Topics: Diffusion (Physics) , Grain boundaries , Oxygen , Stress , Oxidation , Viscoplasticity , Crystals , Plasticity , Superalloys

Modeling and Measurement of Residual Stresses in a Steel Vessel Containing Glass

S. Nakhodchi, B. G. Thomas, D. J. Smith

J. Eng. Mater. Technol. July 2011, 133(3): 031003. doi: https://doi.org/10.1115/1.4004157

Abstract

View articletitled, Modeling and Measurement of Residual Stresses in a Steel Vessel Containing Glass

Open the PDF for in another window

Topics: Containers , Finite element analysis , Glass , Residual stresses , Stainless steel , Steel , Stress , Temperature , Thermal stresses , Cooling

Physical Properties of Porous Clay Ceramic-Ware

A. K. Plappally, I. Yakub, L. C. Brown, W. O. Soboyejo, A. B. O. Soboyejo

J. Eng. Mater. Technol. July 2011, 133(3): 031004. doi: https://doi.org/10.1115/1.4004158

Abstract

View articletitled, Physical Properties of Porous Clay Ceramic-Ware

Open the PDF for in another window

Topics: Ceramics , Density , Fracture toughness , Porosity , Raw materials , Wood wastes , Compressive strength

Modeling the S-N Curves of Polyamide PA66 Using a Serial Hybrid Neural Network

Jernej Klemenc, Andrej Wagner, Matija Fajdiga

J. Eng. Mater. Technol. July 2011, 133(3): 031005. doi: https://doi.org/10.1115/1.4004054

Abstract

View articletitled, Modeling the S-N Curves of Polyamide PA66 Using a Serial Hybrid Neural Network

Open the PDF for in another window

Topics: Artificial neural networks , Modeling , Multilayer perceptron , Polymers , Stress , Uncertainty , Cycles , Failure , Testing , Fatigue

Epoxy Adhesives Modified With Nano- and Microparticles for In Situ Timber Bonding: Fracture Toughness Characteristics

Z. Ahmad, M. P. Ansell, D. Smedley

J. Eng. Mater. Technol. July 2011, 133(3): 031006. doi: https://doi.org/10.1115/1.4003776

Abstract

View articletitled, Epoxy Adhesives Modified With Nano- and Microparticles for In Situ Timber Bonding: Fracture Toughness Characteristics

Open the PDF for in another window

Topics: Adhesives , Fracture (Materials) , Fracture (Process) , Fracture toughness , Notch testing , Epoxy adhesives , Stress , Timber , Bonding , Microparticles

An Instantaneous Power of Strain Approach to the Calculation of Elastoplastic Strain Energy Density in SUS 304 Steel

Cyprian T. Lachowicz, Dorian S. Lachowicz

J. Eng. Mater. Technol. July 2011, 133(3): 031007. doi: https://doi.org/10.1115/1.4003778

Abstract

View articletitled, An Instantaneous Power of Strain Approach to the Calculation of Elastoplastic Strain Energy Density in SUS 304 Steel

Open the PDF for in another window

Topics: Density , Fatigue life , Steel , Stress , Tension , Torsion , Hardening , Fatigue

Effects of Interfacial Friction Distribution on the Superplastic Forming of AA5083

Mohammad I. Albakri, Firas S. Jarrar, Marwan K. Khraisheh

J. Eng. Mater. Technol. July 2011, 133(3): 031008. doi: https://doi.org/10.1115/1.4004159

Abstract

View articletitled, Effects of Interfacial Friction Distribution on the Superplastic Forming of AA5083

Open the PDF for in another window

Topics: Friction

Effect of Localized Metal Matrix Composite Formation on Spot Friction Welding Joint Strength

Scott F. Miller, Senthil G. Arul, Grant H. Kruger, Tsung-Yu Pan, Albert J. Shih

J. Eng. Mater. Technol. July 2011, 133(3): 031009. doi: https://doi.org/10.1115/1.4004389

Abstract

View articletitled, Effect of Localized Metal Matrix Composite Formation on Spot Friction Welding Joint Strength

Open the PDF for in another window

Topics: Fracture (Materials) , Particulate matter , Steel , Friction welding , Metal matrix composites , Stress , Aluminum alloys , Shear (Mechanics)

Guest Editorial

Multiphysics Approaches for the Behavior of Polymer-Based Materials

Multi-Physics Approaches for the Behavior of Polymer-Based Materials

Coupling of Nanocavitation With Cyclic Deformation Behavior of High-Density Polyethylene Below the Yield Point

Measuring the Influence of Temperature on the Development of Elastic Anisotropy With Compressive Plastic Flow for Glassy Polycarbonate

Modifications of the Polylactic Acid Surface Properties by DBD Plasma Treatment at Atmospheric Pressure

Quantification of Cavitation in Neat and Calcium Carbonate-Filled High-Density Polyethylene Subjected to Tension

Modeling of the Stress–Birefringence–Stretch Behavior in Rubbers Using the Gent Model

Strategies for the Analysis of the Behavior of an Adhesive in Bonded Assemblies

Mechanical Behavior of Recycled Polypropylene Composites Under Tensile, Bending, and Creep Loading: Experimental and Modeling

Dynamic Mechanical Properties of PMMA/Organoclay Nanocomposite: Experiments and Modeling

Research Papers

Fatigue Life Modeling of Anisotropic Materials Using a Multiaxial Notch Analysis

Modeling of Oxygen Diffusion Along Grain Boundaries in a Nickel-Based Superalloy

Modeling and Measurement of Residual Stresses in a Steel Vessel Containing Glass

Physical Properties of Porous Clay Ceramic-Ware

Modeling the S-N Curves of Polyamide PA66 Using a Serial Hybrid Neural Network

Epoxy Adhesives Modified With Nano- and Microparticles for In Situ Timber Bonding: Fracture Toughness Characteristics

An Instantaneous Power of Strain Approach to the Calculation of Elastoplastic Strain Energy Density in SUS 304 Steel

Effects of Interfacial Friction Distribution on the Superplastic Forming of AA5083

Effect of Localized Metal Matrix Composite Formation on Spot Friction Welding Joint Strength

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Guest Editorial

Multi-Physics Approaches for the Behavior of Polymer-Based Materials

Research Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only