Topics: Alloys , Aluminum alloys , Atomic force microscopy , Blanks , Ductility , Grain boundaries , Interface structure , Microhardness , Nanoindentation , Welding

Effect of Bond Thickness on the Fracture Toughness of Adhesive Joints

Deok-Bo Lee, Toru Ikeda, Noriyuki Miyazaki, Nak-Sam Choi

J. Eng. Mater. Technol. January 2004, 126(1): 14–18. doi: https://doi.org/10.1115/1.1631433

Abstract

View articletitled, Effect of Bond Thickness on the Fracture Toughness of Adhesive Joints

Open the PDF for in another window

Topics: Adhesive joints , Adhesives , Fracture (Materials) , Fracture toughness , Rubber , Damage , Epoxy resins , Stress , Particulate matter

Observations of the Constitutive Response and Characterization of Filled Natural Rubber Under Monotonic and Cyclic Multiaxial Stress States

W. V. Mars, Principal Research Engineer, A. Fatemi, Professor

J. Eng. Mater. Technol. January 2004, 126(1): 19–28. doi: https://doi.org/10.1115/1.1631432

Abstract

View articletitled, Observations of the Constitutive Response and Characterization of Filled Natural Rubber Under Monotonic and Cyclic Multiaxial Stress States

Open the PDF for in another window

Topics: Rubber , Stress , Tension , Torsion , Cycles , Natural rubber

Size Effect on Flexural Strength of Fiber-Composite Laminates

Zdeneˇk P. Bazˇant, McCormick School Prof. and Walter P. Murphy Prof. of Civil Eng. and Mat. Sci., Yong Zhou, Research Assistant, Drahomı´r Nova´k, Visiting Scholar, Isaac M. Daniel, Walter P. Murphy Professor of Civil and Mechanical Engineering

J. Eng. Mater. Technol. January 2004, 126(1): 29–37. doi: https://doi.org/10.1115/1.1631031

Abstract

View articletitled, Size Effect on Flexural Strength of Fiber-Composite Laminates

Open the PDF for in another window

Topics: Bending strength , Laminates , Size effect , Stress , Fibers

Transverse-Isotropic Elastic and Viscoelastic Solids

Alan D. Freed, ASME Fellow, Senior Research Engineer,

J. Eng. Mater. Technol. January 2004, 126(1): 38–44. doi: https://doi.org/10.1115/1.1631030

Abstract

View articletitled, Transverse-Isotropic Elastic and Viscoelastic Solids

Open the PDF for in another window

Topics: Deformation , Elasticity , Shear (Mechanics) , Solids , Viscoelasticity , Tensors , Anisotropy , Die cutting , Shearing (Deformation)

A Two-Property Yield, Failure (Fracture) Criterion for Homogeneous, Isotropic Materials

Richard M. Christensen, Honorary Mem. ASME

J. Eng. Mater. Technol. January 2004, 126(1): 45–52. doi: https://doi.org/10.1115/1.1631024

Abstract

View articletitled, A Two-Property Yield, Failure (Fracture) Criterion for Homogeneous, Isotropic Materials

Open the PDF for in another window

Topics: Failure , Fracture (Materials) , Stress , Fracture (Process) , Brittleness

Effect of Strain Path and the Magnitude of Prestrain on the Formability of a Low Carbon Steel: On the Textural and Microtextural Developments

S. K. Yerra, H. V. Vankudre, P. P. Date, I. Samajdar

J. Eng. Mater. Technol. January 2004, 126(1): 53–61. doi: https://doi.org/10.1115/1.1631435

Abstract

View articletitled, Effect of Strain Path and the Magnitude of Prestrain on the Formability of a Low Carbon Steel: On the Textural and Microtextural Developments

Open the PDF for in another window

Topics: Carbon steel , Deformation , Texture (Materials) , Simulation

A Comparison of Two Self-Consistent Models to Predict the Cyclic Behavior of Polycrystals

A. Abdul-Latif

J. Eng. Mater. Technol. January 2004, 126(1): 62–69. doi: https://doi.org/10.1115/1.1633572

Abstract

View articletitled, A Comparison of Two Self-Consistent Models to Predict the Cyclic Behavior of Polycrystals

Open the PDF for in another window

Topics: Hardening , Kinematics , Stainless steel , Modeling , Crystals

Procedure for the Determination of True Stress-Strain Curves From Tensile Tests With Rectangular Cross-Section Specimens

I. Scheider, W. Brocks, A. Cornec

J. Eng. Mater. Technol. January 2004, 126(1): 70–76. doi: https://doi.org/10.1115/1.1633573

Abstract

View articletitled, Procedure for the Determination of True Stress-Strain Curves From Tensile Tests With Rectangular Cross-Section Specimens

Open the PDF for in another window

Topics: Finite element analysis , Necking , Stress , Stress-strain curves , Deformation , Displacement

Modeling of Fatigue Crack Propagation

Yanyao Jiang, Miaolin Feng

J. Eng. Mater. Technol. January 2004, 126(1): 77–86. doi: https://doi.org/10.1115/1.1631026

Abstract

View articletitled, Modeling of Fatigue Crack Propagation

Open the PDF for in another window

Topics: Crack propagation , Fatigue cracks , Fatigue damage , Fracture (Materials) , Plasticity , Stress , Fatigue , Cycles

Influence of Extra Coarse Grains on the Creep Properties of 9 Percent CrMoV (P91) Steel Weldment

Rui Wu, Rolf Sandstro¨m, Facredin Seitisleam

J. Eng. Mater. Technol. January 2004, 126(1): 87–94. doi: https://doi.org/10.1115/1.1631025

Abstract

View articletitled, Influence of Extra Coarse Grains on the Creep Properties of 9 Percent CrMoV (P91) Steel Weldment

Open the PDF for in another window

Topics: Creep , Metals , Rupture , Welding , Steel , Stress , Metallography

Finite Element Evaluation of the Remaining Mechanical Strength of Deteriorated Cast Iron Pipes

Michael V. Seica, Research Fellow, Jeffrey A. Packer, Professor

J. Eng. Mater. Technol. January 2004, 126(1): 95–102. doi: https://doi.org/10.1115/1.1631027

Abstract

View articletitled, Finite Element Evaluation of the Remaining Mechanical Strength of Deteriorated Cast Iron Pipes

Open the PDF for in another window

Topics: Bearings , Cast iron , Corrosion , Finite element analysis , Pipes , Failure , Stress , Modeling , Pipe bending

A Study of Thermal Fracture in Functionally Graded Thermal Barrier Coatings Using a Cohesive Zone Model

Sudarshan Rangaraj, Klod Kokini, Fellow ASME

J. Eng. Mater. Technol. January 2004, 126(1): 103–115. doi: https://doi.org/10.1115/1.1631028

Abstract

View articletitled, A Study of Thermal Fracture in Functionally Graded Thermal Barrier Coatings Using a Cohesive Zone Model

Open the PDF for in another window

Topics: Alloys , Fracture (Materials) , Separation (Technology) , Surface cracks , Thermal shock , Traction , Composite materials , Fracture (Process) , Coatings

A Simplified Approach to Estimate Limiting Drawing Ratio and Maximum Drawing Load in Cup Drawing

Daw-Kwei Leu, Professor, Jen-Yu Wu, Technical Instructor

J. Eng. Mater. Technol. January 2004, 126(1): 116–122. doi: https://doi.org/10.1115/1.1633574

Abstract

View articletitled, A Simplified Approach to Estimate Limiting Drawing Ratio and Maximum Drawing Load in Cup Drawing

Open the PDF for in another window

Topics: Friction , Stress , Work hardening , Anisotropy , Sheet metal , Plasticity

Introduction of Compressive Residual Stress Using a Cavitating Jet in Air

Hitoshi Soyama, Mem. ASME, Professor

J. Eng. Mater. Technol. January 2004, 126(1): 123–128. doi: https://doi.org/10.1115/1.1631434

Abstract

View articletitled, Introduction of Compressive Residual Stress Using a Cavitating Jet in Air

Open the PDF for in another window

Topics: Cavitation , Pressure , Shot peening , Stress , Water , Aluminum , Jets , Tool steel , Bubbles

Through-Thickness Residual Stress Distribution After the Cold Expansion of Fastener Holes and Its Effect on Fracturing

A. Tamer O¨zdemir, Lyndon Edwards

J. Eng. Mater. Technol. January 2004, 126(1): 129–135. doi: https://doi.org/10.1115/1.1634278

Abstract

View articletitled, Through-Thickness Residual Stress Distribution After the Cold Expansion of Fastener Holes and Its Effect on Fracturing

Open the PDF for in another window

Topics: Drilling , Fourier series , Fracture (Materials) , Fracture (Process) , Hoop stress , Residual stresses , Stress , Stress concentration , Neutron diffraction , Finite element analysis

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Investigating Microstructure and Wear Characteristics of Alloy Steels Used as Wear Plates in Ballast Cleaning Operation in Railways

J. Eng. Mater. Technol (January 2025)

MODELING GROWTH AND VISCOUS FLOW OF OXIDE ON CYLINDRICAL SILICON SURFACES INCLUDING PIEZOVISCOUS INHIBITION

J. Eng. Mater. Technol

Thermal Conductivity of 3D Printed Metal using Extrusion-based Metal Additive Manufacturing Process

J. Eng. Mater. Technol

Active Constrained Layer Damping of Beams With Natural Fiber Reinforced Viscoelastic Composites

J. Eng. Mater. Technol (January 2025)

High-Temperature Fatigue of Additively Manufactured Inconel 718: A Short Review

J. Eng. Mater. Technol (January 2025)

Technical Papers

Investigation of Fracture in Transparent Glass Fiber Reinforced Polymer Composites Using Photoelasticity

Interfacial Structure and Micro and Nano-Mechanical Behavior of Laser-Welded 6061 Aluminum Alloy Blank

Effect of Bond Thickness on the Fracture Toughness of Adhesive Joints

Observations of the Constitutive Response and Characterization of Filled Natural Rubber Under Monotonic and Cyclic Multiaxial Stress States

Size Effect on Flexural Strength of Fiber-Composite Laminates

Transverse-Isotropic Elastic and Viscoelastic Solids

A Two-Property Yield, Failure (Fracture) Criterion for Homogeneous, Isotropic Materials

Effect of Strain Path and the Magnitude of Prestrain on the Formability of a Low Carbon Steel: On the Textural and Microtextural Developments

A Comparison of Two Self-Consistent Models to Predict the Cyclic Behavior of Polycrystals

Procedure for the Determination of True Stress-Strain Curves From Tensile Tests With Rectangular Cross-Section Specimens

Modeling of Fatigue Crack Propagation

Influence of Extra Coarse Grains on the Creep Properties of 9 Percent CrMoV (P91) Steel Weldment

Finite Element Evaluation of the Remaining Mechanical Strength of Deteriorated Cast Iron Pipes

A Study of Thermal Fracture in Functionally Graded Thermal Barrier Coatings Using a Cohesive Zone Model

A Simplified Approach to Estimate Limiting Drawing Ratio and Maximum Drawing Load in Cup Drawing

Introduction of Compressive Residual Stress Using a Cavitating Jet in Air

Through-Thickness Residual Stress Distribution After the Cold Expansion of Fastener Holes and Its Effect on Fracturing

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only