Skip Nav Destination
Issues
February 1973
This article was originally published in
Journal of Engineering for Industry
ISSN 0022-0817
Research Papers
Materials Handling Papers
Bin Loads—Part 2: Concepts
J. Eng. Ind. February 1973, 95(1): 1–5.
doi: https://doi.org/10.1115/1.3438100
Topics:
Stress
,
Bulk solids
,
Design
,
Pressure
Bin Loads—Part 3: Mass-Flow Bins
J. Eng. Ind. February 1973, 95(1): 6–12.
doi: https://doi.org/10.1115/1.3438163
Topics:
Flow (Dynamics)
,
Stress
,
Bulk solids
,
Design
,
Vessels
Bin Loads—Part 4: Funnel-Flow Bins
J. Eng. Ind. February 1973, 95(1): 13–16.
doi: https://doi.org/10.1115/1.3438089
Topics:
Flow (Dynamics)
,
Stress
,
Bulk solids
,
Design
,
Vessels
Flow Patterns and Wall Stresses in a Mass-Flow Bunker
J. Eng. Ind. February 1973, 95(1): 17–26.
doi: https://doi.org/10.1115/1.3438096
Topics:
Flow (Dynamics)
,
Stress
,
Deformation
,
Density
,
Shear (Mechanics)
The Bougainville 975 TPH Feeder
J. Eng. Ind. February 1973, 95(1): 27–30.
doi: https://doi.org/10.1115/1.3438122
Topics:
Belts
,
Cables
,
Design
,
Flow (Dynamics)
,
Horsepower
,
Hydraulic drive systems
,
Pulleys
,
Steel
,
Stress
,
Surges
Application of Pseudo-Random Test Signals and Cross Correlation to the Identification of Bulk Handling Plant Dynamic Characteristics
J. Eng. Ind. February 1973, 95(1): 31–36.
doi: https://doi.org/10.1115/1.3438130
Topics:
Materials handling
,
Signals
,
Conveyor systems
,
Frequency response
,
Grain handling
,
Noise (Sound)
,
Screws
Aeration Apparatus Converts Bin From Funnel-Flow to Mass-Flow Characteristics
J. Eng. Ind. February 1973, 95(1): 37–41.
doi: https://doi.org/10.1115/1.3438141
Topics:
Flow (Dynamics)
,
Bulk solids
,
Design
,
Flow control
,
Reliability
,
Space utilization (Design)
,
Storage
The Design of a Linear “Out of Phase” Vibratory Conveyor
J. Eng. Ind. February 1973, 95(1): 42–47.
doi: https://doi.org/10.1115/1.3438154
Topics:
Conveyor systems
,
Design
,
Rubber
,
Vibration
,
Belts
,
Excitation
,
Friction
,
Hydraulic pumps
,
Shear (Mechanics)
An Evaluation of the Jenike Bunker Design Method
J. Eng. Ind. February 1973, 95(1): 48–54.
doi: https://doi.org/10.1115/1.3438155
Topics:
Design methodology
,
Design
,
Flow (Dynamics)
,
Iron
,
Pressure
,
Geometry
,
Iron and steel mill construction
,
Wedges
Measurement of Powder Properties for Hopper Design
J. Eng. Ind. February 1973, 95(1): 55–59.
doi: https://doi.org/10.1115/1.3438158
Topics:
Design
,
Stress
,
Flow (Dynamics)
,
Powder metallurgy
,
Shear (Mechanics)
,
Shear strength
Wear-Resistant Materials for Steelworks Plant Handling Coke and Sinter
J. Eng. Ind. February 1973, 95(1): 60–64.
doi: https://doi.org/10.1115/1.3438161
Topics:
Coke
,
Iron and steel mill construction
,
Sinter (Metallurgy)
,
Wear
,
Blast furnaces
,
Plant maintenance
,
Wear testing
Slurry Flow in Pipes and Pumps
J. Eng. Ind. February 1973, 95(1): 65–71.
doi: https://doi.org/10.1115/1.3438162
Topics:
Flow (Dynamics)
,
Pipes
,
Pumps
,
Slurries
,
Turbulence
,
Energy dissipation
,
Solids
Feeding Calcine Dust With a Belt Feeder at Falconbridge
J. Eng. Ind. February 1973, 95(1): 72–74.
doi: https://doi.org/10.1115/1.3438164
Topics:
Belts
,
Dust
,
Flow (Dynamics)
,
Patents
Flow Behavior of Hematite Slurries
J. Eng. Ind. February 1973, 95(1): 75–77.
doi: https://doi.org/10.1115/1.3438165
Topics:
Flow (Dynamics)
,
Slurries
,
Particle size
,
Solids
,
Temperature
,
Viscosity
,
Weight (Mass)
Preliminary Estimate of Mixing Effect of Nonsegregating Materials in a Plug-Flow Bin
J. Eng. Ind. February 1973, 95(1): 78–80.
doi: https://doi.org/10.1115/1.3438166
Topics:
Flow (Dynamics)
Minimizing Segregation in Bunkers
J. Eng. Ind. February 1973, 95(1): 81–85.
doi: https://doi.org/10.1115/1.3438167
Topics:
Density
,
Flow (Dynamics)
,
Iron and steel mill construction
,
Particle size
,
Raw materials
,
Shapes
,
Sinter (Metallurgy)
,
Wedges
A Geometric Study of In-Bin Blending
J. Eng. Ind. February 1973, 95(1): 86–92.
doi: https://doi.org/10.1115/1.3438168
Topics:
Flow (Dynamics)
,
Particulate matter
Precautions in Order to Attain Design Capabilities of Mass-Flow Systems
J. Eng. Ind. February 1973, 95(1): 93–96.
doi: https://doi.org/10.1115/1.3438169
Topics:
Design
,
Flow (Dynamics)
Pressure Behavior in Double Cylindrical Silos
J. Eng. Ind. February 1973, 95(1): 97–100.
doi: https://doi.org/10.1115/1.3438170
Topics:
Pressure
Singulation—A Problem in Design
J. Eng. Ind. February 1973, 95(1): 101–105.
doi: https://doi.org/10.1115/1.3438083
Other Technical Papers
Derivation of Stress Intensification Factors for a Special, Contoured, Integrally Reinforced Branch Connection
J. Eng. Ind. February 1973, 95(1): 106–112.
doi: https://doi.org/10.1115/1.3438084
Topics:
Stress
,
Pipes
,
Weight (Mass)
,
Carbon steel
,
Fatigue
,
Fatigue testing
,
Fittings
,
Freezing
,
Pressure
,
Pressure vessels
Influence of External Loads on Pressure-Carrying Capacity of Outlet Connections
J. Eng. Ind. February 1973, 95(1): 113–120.
doi: https://doi.org/10.1115/1.3438085
Topics:
Pressure
,
Stress
,
Pressure vessels
,
Shear (Mechanics)
,
Steel
Effective Elastic Constants for the Bending of Thin Perforated Plates With Triangular and Square Penetration Patterns
J. Eng. Ind. February 1973, 95(1): 121–128.
doi: https://doi.org/10.1115/1.3438086
Topics:
Elastic constants
,
Plates (structures)
,
Aluminum
,
ASME Standards
,
Diluents
,
Plane strain
Elasto-Plastic Analysis of Constrained Disk Burst Tests
J. Eng. Ind. February 1973, 95(1): 129–136.
doi: https://doi.org/10.1115/1.3438087
Topics:
Disks
,
Failure
,
Deflection
,
Pressure
,
Steel
,
Yield strength
Engineering Significance of Statistical and Temperature-Induced Fracture Mechanics Toughness Variations on Fracture-Safe Assurance
J. Eng. Ind. February 1973, 95(1): 137–144.
doi: https://doi.org/10.1115/1.3438088
Topics:
Fracture (Materials)
,
Fracture (Process)
,
Fracture mechanics
,
Fracture toughness
,
Temperature
,
Alloys
,
Steel
,
Stress
,
Brittleness
,
Carbon
The Stress Analysis of Heat Exchanger Expansion Joints in the Elastic Range
J. Eng. Ind. February 1973, 95(1): 145–150.
doi: https://doi.org/10.1115/1.3438090
Topics:
Expansion joints
,
Heat exchangers
,
Stress analysis (Engineering)
,
Deformation
,
Pressure
,
Shells
,
Strain gages
,
Stress
Effect of Corner Shape on Elastic Stress and Strain Concentration in Plates With an Oblique Hole
J. Eng. Ind. February 1973, 95(1): 151–157.
doi: https://doi.org/10.1115/1.3438091
Topics:
Corners (Structural elements)
,
Plates (structures)
,
Shapes
,
Stress
,
Nozzles
,
Design
,
Pressure vessels
,
Shells
,
Steel
Statistical Analysis of Charpy-V Impact Properties SA533 Grade B Class 1 and SA516 Grade 70 Plate Material
J. Eng. Ind. February 1973, 95(1): 158–162.
doi: https://doi.org/10.1115/1.3438092
Topics:
Statistical analysis
,
Temperature
,
Ductility
,
Fracture toughness
,
Plates (structures)
,
Statistics
,
Weight (Mass)
A Transient Elastic-Plastic Thermal Stress Analysis of Flame Forming
J. Eng. Ind. February 1973, 95(1): 163–171.
doi: https://doi.org/10.1115/1.3438093
Conical Shell Inversion—An Approximate Energy Analysis
J. Eng. Ind. February 1973, 95(1): 172–176.
doi: https://doi.org/10.1115/1.3438094
Topics:
Shells
,
Deflection
,
Stress
,
Collapse
,
Deformation
,
Steady state
An Evaluation of Finite Element Methods for the Computation of Elastic Stress Intensity Factors
J. Eng. Ind. February 1973, 95(1): 177–185.
doi: https://doi.org/10.1115/1.3438095
Topics:
Computation
,
Finite element methods
,
Stress
,
Finite element analysis
,
Plane strain
,
Stiffness
Optimization of Finite Element Grids Based on Minimum Potential Energy
J. Eng. Ind. February 1973, 95(1): 186–190.
doi: https://doi.org/10.1115/1.3438097
Topics:
Finite element analysis
,
Optimization
,
Potential energy
,
Stress
,
Membranes
,
Tension
Computerized Time-Temperature Parametric Analysis of C, Mo, and Cr-Mo Steel Stress-Rupture Data
J. Eng. Ind. February 1973, 95(1): 191–197.
doi: https://doi.org/10.1115/1.3438098
Topics:
Rupture
,
Steel
,
Stress
,
Temperature
,
Computer software
,
Computers
,
Electromagnetic scattering
,
Polynomials
A Rotating Valve for High Pressures
J. Eng. Ind. February 1973, 95(1): 198–200.
doi: https://doi.org/10.1115/1.3438099
Topics:
Valves
,
Vessels
,
Instrumentation
Stress State Around an Elliptic Hole in a Conical Shell Under Tension
J. Eng. Ind. February 1973, 95(1): 201–207.
doi: https://doi.org/10.1115/1.3438101
Topics:
Shells
,
Stress
,
Tension
,
Fracture (Materials)
,
Membranes
Inelastic Buckling of Shallow Spherical Shells Under External Pressure
J. Eng. Ind. February 1973, 95(1): 208–214.
doi: https://doi.org/10.1115/1.3438102
Rigid-Plastic Collapse of Cylindrical Shells
J. Eng. Ind. February 1973, 95(1): 215–218.
doi: https://doi.org/10.1115/1.3438103
Topics:
Collapse
,
Pipes
,
Stress
,
External pressure
,
Cantilevers
,
Shells
Fracture Resistance of Wire-Wrapped Cylinders
J. Eng. Ind. February 1973, 95(1): 219–226.
doi: https://doi.org/10.1115/1.3438104
Topics:
Cylinders
,
Fracture (Materials)
,
Wire
,
Shells
,
Temperature
,
Pressure
,
Steel
,
Brittleness
,
Yield strength
,
Displacement
Process Application and Design of Large Power Output Turboexpanders
J. Eng. Ind. February 1973, 95(1): 227–232.
doi: https://doi.org/10.1115/1.3438107
Topics:
Design
,
Horsepower
,
Optimization
An Evaluation of the Mechanical Properties of Mn-Mo and Mn-Mo-Ni Steels
J. Eng. Ind. February 1973, 95(1): 235–242.
doi: https://doi.org/10.1115/1.3438111
Topics:
Mechanical properties
,
Steel
,
Temperature
,
Tensile strength
,
Creep
,
Rupture
,
Ductility
,
Fracture toughness
,
Yield strength
A Means of Increasing Drill Collar Connection Life
J. Eng. Ind. February 1973, 95(1): 243–246.
doi: https://doi.org/10.1115/1.3438114
Topics:
Drills (Tools)
,
Failure
,
Stress
,
Fatigue testing
,
Fuels
,
Natural gas wells
Analysis of Center to Edge Foundation Settlement of Atmospheric Storage Tanks
J. Eng. Ind. February 1973, 95(1): 247–255.
doi: https://doi.org/10.1115/1.3438115
Topics:
Storage tanks
,
Buckling
,
Membranes
,
Plates (structures)
,
Shells
,
Deflection
,
Design
,
Shear (Mechanics)
,
Soil
,
Steel
Diamond Bit Drilling Research
J. Eng. Ind. February 1973, 95(1): 256–262.
doi: https://doi.org/10.1115/1.3438116
Topics:
Diamond bits
,
Drilling
,
Weight (Mass)
,
Diamonds
,
Flow (Dynamics)
,
Horsepower
,
Hydraulic lifts
,
Oil fields
,
Pressure
,
Torque
Motion of a Ball in a Ball Bearing
J. Eng. Ind. February 1973, 95(1): 263–268.
doi: https://doi.org/10.1115/1.3438117
Topics:
Ball bearings
,
Bearings
,
Computer simulation
,
Computers
,
Coulombs
,
Deformation
,
Differential equations
,
Friction
Radial Displacements of a Hollow Shaft Subjected to a Uniform Band of External Pressure
J. Eng. Ind. February 1973, 95(1): 269–274.
doi: https://doi.org/10.1115/1.3438118
Topics:
External pressure
,
Elasticity
,
Finite element methods
,
Stiffness
An Improved Technique for Theoretically Determining the Lift Distribution on an Automobile
J. Eng. Ind. February 1973, 95(1): 275–279.
doi: https://doi.org/10.1115/1.3438121
Topics:
Automobiles
,
Vehicles
,
Lift (Fluid dynamics)
,
Pressure measurement
Design Charts for the Three-Gear Drive
J. Eng. Ind. February 1973, 95(1): 280–282.
doi: https://doi.org/10.1115/1.3438123
Calculation of Residual Stresses in Plastic Deformation Processes
J. Eng. Ind. February 1973, 95(1): 283–291.
doi: https://doi.org/10.1115/1.3438124
Topics:
Deformation
,
Residual stresses
,
Cylinders
,
Extruding
,
Finite element methods
,
Pressure
,
Autofrettage
,
Plane strain
,
Stress
,
Stress concentration
Review of Materials Processing Literature—1969–1970: 1—Plastic Working of Metals
J. Eng. Ind. February 1973, 95(1): 292–298.
doi: https://doi.org/10.1115/1.3438125
Topics:
Materials processing
,
Metals
,
Grinding
Review of Materials Processing Literature—1969–1970: 2—Grinding
J. Eng. Ind. February 1973, 95(1): 299–306.
doi: https://doi.org/10.1115/1.3438126
Topics:
Grinding
,
Materials processing
Review of Materials Processing Literature—1969–1970: 3—Review of German Language Literature
J. Eng. Ind. February 1973, 95(1): 307–311.
doi: https://doi.org/10.1115/1.3438127
Topics:
Materials processing
Analytical Sensitivity Studies of the Optimum Machining Conditions for Milling, Drilling, Reaming, and Tapping
J. Eng. Ind. February 1973, 95(1): 312–316.
doi: https://doi.org/10.1115/1.3438128
Topics:
Drilling
,
Machining
,
Milling
,
Sensitivity analysis
Analysis of Temperature Field in Chip
J. Eng. Ind. February 1973, 95(1): 317–320.
doi: https://doi.org/10.1115/1.3438129
Topics:
Temperature
,
Metals
,
Steel
,
Temperature gradient
An Approximate Rigid-Plastic Analysis of Shell Intersections Loaded Dynamically
J. Eng. Ind. February 1973, 95(1): 321–331.
doi: https://doi.org/10.1115/1.3438131
Mesh Generation—A Survey
J. Eng. Ind. February 1973, 95(1): 332–338.
doi: https://doi.org/10.1115/1.3438132
Computer-Aided Synthesis of Mechanisms Using Nonlinear Programming
J. Eng. Ind. February 1973, 95(1): 339–344.
doi: https://doi.org/10.1115/1.3438133
A Finite Element Based Procedure for Simulating the Transient Response and Failure of a Two-Dimensional Continuum With Nonlinear Material Characteristics
J. Eng. Ind. February 1973, 95(1): 345–352.
doi: https://doi.org/10.1115/1.3438134
Base Flow Characteristics of a Linear Aerospike Nozzle Segment
J. Eng. Ind. February 1973, 95(1): 353–359.
doi: https://doi.org/10.1115/1.3438135
Optimization of Drag Minimums Including Effects of Flow Separation
J. Eng. Ind. February 1973, 95(1): 360–364.
doi: https://doi.org/10.1115/1.3438136
Topics:
Drag (Fluid dynamics)
,
Flow separation
,
Optimization
,
Flight
,
Separation (Technology)
,
Design
,
Form drag
,
Shorelines
Technology and the Limits to Growth
J. Eng. Ind. February 1973, 95(1): 365–369.
doi: https://doi.org/10.1115/1.3438137
Topics:
Delays
,
Simulation
,
Steady state
,
Teams
Pressure Ratio Effects on Rarefied Flow Through Square Tubes
J. Eng. Ind. February 1973, 95(1): 370–372.
doi: https://doi.org/10.1115/1.3438138
Topics:
Flow (Dynamics)
,
Pressure
,
Knudsen number
Investigation of Pulse Tube Refrigerator
J. Eng. Ind. February 1973, 95(1): 373–378.
doi: https://doi.org/10.1115/1.3438139
Topics:
Heat
,
Pressure
,
Temperature
,
Theoretical analysis
A Power Cycle to Eliminate Thermal Pollution
J. Eng. Ind. February 1973, 95(1): 379–382.
doi: https://doi.org/10.1115/1.3438140
Topics:
Condensers (steam plant)
,
Coolers
,
Cooling
,
Cycles
,
Evaporation
,
Heat
,
Pollution
,
Power stations
,
Pressure
,
Refrigerants
On the Limits to Energy Release and Implications for Present Policy
J. Eng. Ind. February 1973, 95(1): 383–390.
doi: https://doi.org/10.1115/1.3438142
Topics:
Economics
,
Energy resources
,
Engineers
,
Heat sinks
,
Pollution
,
Reservoirs
Optimal Design of a Regenerative Clutch-Brake
J. Eng. Ind. February 1973, 95(1): 391–398.
doi: https://doi.org/10.1115/1.3438143
Industrial Use of Renovated Municipal Wastewater
J. Eng. Ind. February 1973, 95(1): 401–409.
doi: https://doi.org/10.1115/1.3438147
Topics:
Sewage
,
Water
,
Canals
,
Cooling
,
Wastewater treatment
Discussions
Discussion: “Flow Patterns and Wall Stresses in a Mass-Flow Bunker” (Blair-Fish, P. M., and Bransby, P. L., 1973, ASME J. Eng. Ind., 95, pp. 17–26)
J. Eng. Ind. February 1973, 95(1): 26.
doi: https://doi.org/10.1115/1.3438119
Topics:
Flow (Dynamics)
,
Stress
Closure to “Discussion of ‘Flow Patterns and Wall Stresses in a Mass-Flow Bunker’” (1973, ASME J. Eng. Ind., 95, p. 26)
J. Eng. Ind. February 1973, 95(1): 26.
doi: https://doi.org/10.1115/1.3438120
Topics:
Flow (Dynamics)
,
Stress
Discussion: “Aeration Apparatus Converts Bin From Funnel-Flow to Mass-Flow Characteristics” (Emery, R. B., 1973, ASME J. Eng. Ind., 95, pp. 37–41)
J. Eng. Ind. February 1973, 95(1): 41.
doi: https://doi.org/10.1115/1.3438152
Topics:
Flow (Dynamics)
Closure to “Discussion of ‘Aeration Apparatus Converts Bin From Funnel-Flow to Mass-Flow Characteristics’” (1973, ASME J. Eng. Ind., 95, p. 41)
J. Eng. Ind. February 1973, 95(1): 41.
doi: https://doi.org/10.1115/1.3438153
Topics:
Flow (Dynamics)
Discussion: “An Evaluation of the Jenike Bunker Design Method” (Wright, H., 1973, ASME J. Eng. Ind., 95, pp. 48–54)
J. Eng. Ind. February 1973, 95(1): 54.
doi: https://doi.org/10.1115/1.3438156
Topics:
Design methodology
Closure to “Discussion of ‘An Evaluation of the Jenike Bunker Design Method’” (1973, ASME J. Eng. Ind., 95, p. 54)
J. Eng. Ind. February 1973, 95(1): 54.
doi: https://doi.org/10.1115/1.3438157
Topics:
Design
Discussion: “Measurement of Powder Properties for Hopper Design” (Schwedes, J., 1973, ASME J. Eng. Ind., 95, pp. 55–59)
J. Eng. Ind. February 1973, 95(1): 59.
doi: https://doi.org/10.1115/1.3438159
Topics:
Design
Closure to “Discussion of ‘Measurement of Powder Properties for Hopper Design’” (1973, ASME J. Eng. Ind., 95, p. 59)
J. Eng. Ind. February 1973, 95(1): 59.
doi: https://doi.org/10.1115/1.3438160
Discussion: “Fracture Resistance of Wire-Wrapped Cylinders” (Shoemaker, A. K., Melville, T., and Steiner, J. E., 1973, ASME J. Eng. Ind., 95, pp. 219–226)
J. Eng. Ind. February 1973, 95(1): 226.
doi: https://doi.org/10.1115/1.3438105
Topics:
Cylinders
,
Fracture (Materials)
,
Fracture (Process)
,
Wire
Closure to “Discussion of ‘Fracture Resistance of Wire-Wrapped Cylinders’” (1973, ASME J. Eng. Ind., 95, p. 226)
J. Eng. Ind. February 1973, 95(1): 226.
doi: https://doi.org/10.1115/1.3438106
Topics:
Fracture (Materials)
,
Fracture (Process)
,
Wire
Discussion: “Process Application and Design of Large Power Output Turboexpanders” (Linhardt, H. D., 1973, ASME J. Eng. Ind., 95, pp. 227–232)
J. Eng. Ind. February 1973, 95(1): 233.
doi: https://doi.org/10.1115/1.3438108
Topics:
Design
Discussion: “Process Application and Design of Large Power Output Turboexpanders” (Linhardt, H. D., 1973, ASME J. Eng. Ind., 95, pp. 227–232)
J. Eng. Ind. February 1973, 95(1): 233–234.
doi: https://doi.org/10.1115/1.3438109
Topics:
Design
Closure to “Discussions of ‘Process Application and Design of Large Power Output Turboexpanders’” (1973, ASME J. Eng. Ind., 95, pp. 233–234)
J. Eng. Ind. February 1973, 95(1): 234.
doi: https://doi.org/10.1115/1.3438110
Topics:
Design
Discussion: “An Evaluation of the Mechanical Properties of Mn-Mo and Mn-Mo-Ni Steels” (Swift, R. A., and Gulya, J. A., 1973, ASME J. Eng. Ind., 95, pp. 235–242)
J. Eng. Ind. February 1973, 95(1): 242.
doi: https://doi.org/10.1115/1.3438112
Topics:
Mechanical properties
,
Steel
Closure to “Discussion of ‘An Evaluation of the Mechanical Properties of Mn-Mo and Mn-Mo-Ni Steels’” (1973, ASME J. Eng. Ind., 95, p. 242)
J. Eng. Ind. February 1973, 95(1): 242.
doi: https://doi.org/10.1115/1.3438113
Topics:
Mechanical properties
Discussion: “Optimal Design of a Regenerative Clutch-Brake” (Geis, D. G., and Uzgiris, S. C., 1973, ASME J. Eng. Ind., 95, pp. 391–398)
J. Eng. Ind. February 1973, 95(1): 399.
doi: https://doi.org/10.1115/1.3438144
Discussion: “Optimal Design of a Regenerative Clutch-Brake” (Geis, D. G., and Uzgiris, S. C., 1973, ASME J. Eng. Ind., 95, pp. 391–398)
J. Eng. Ind. February 1973, 95(1): 399.
doi: https://doi.org/10.1115/1.3438145
Closure to “Discussions of ‘Optimal Design of a Regenerative Clutch-Brake’” (1973, ASME J. Eng. Ind., 95, p. 399)
J. Eng. Ind. February 1973, 95(1): 399–400.
doi: https://doi.org/10.1115/1.3438146
Topics:
Design
Discussion: “Karman Vortex Streets and Flow-Induced Vibrations in Tube Banks” (Chen, Y. N., 1973, ASME J. Eng. Ind., 95, pp. 410–412)
J. Eng. Ind. February 1973, 95(1): 412–413.
doi: https://doi.org/10.1115/1.3438149
Topics:
Flow-induced vibrations
,
Roads
,
Vortices
Closure to “Discussion of ‘Karman Vortex Streets and Flow-Induced Vibrations in Tube Banks’” (1973, ASME J. Eng. Ind., 95, pp. 412–413)
J. Eng. Ind. February 1973, 95(1): 413–414.
doi: https://doi.org/10.1115/1.3438150
Topics:
Flow-induced vibrations
,
Roads
,
Vortices
Technical Briefs
Karman Vortex Streets and Flow-Induced Vibrations in Tube Banks
J. Eng. Ind. February 1973, 95(1): 410–412.
doi: https://doi.org/10.1115/1.3438148
Topics:
Flow-induced vibrations
,
Roads
,
Vortices
The Relative Angular Velocity Between Links
J. Eng. Ind. February 1973, 95(1): 414–415.
doi: https://doi.org/10.1115/1.3438151
Topics:
Joining
Email alerts
RSS Feeds
A REVIEW OF ADVANCED ROLL-TO-ROLL MANUFACTURING: SYSTEM MODELING AND CONTROL
J. Manuf. Sci. Eng
Fatigue Scattering Analytics and Prediction of SS 316L Fabricated by Laser Powder Bed Fusion
J. Manuf. Sci. Eng (February 2025)