Volume 137 Issue 5 | J. Manuf. Sci. Eng.

Topics: Alloys , Cutting , Deformation , Extruding , Shear (Mechanics) , Texture (Materials) , Magnesium alloys , Temperature , Manufacturing , Flow (Dynamics)

Generation of a Fine Grain Layer in the Vicinity of Frictional Interfaces in Direct Extrusion of AZ31 Alloy

Sergei Alexandrov, Yeau-Ren Jeng, Yeong-Maw Hwang

J. Manuf. Sci. Eng. October 2015, 137(5): 051003. doi: https://doi.org/10.1115/1.4030267

Abstract

View articletitled, Generation of a Fine Grain Layer in the Vicinity of Frictional Interfaces in Direct Extrusion of AZ31 Alloy

Open the PDF for in another window

Topics: Alloys , Extruding , Friction

Effect of Deformation and Temperature Paths in Severe Plastic Deformation Using Groove Pressing on Microstructure, Texture, and Mechanical Properties of AZ31-O

Kai Soon Fong, Danno Atsushi, Tan Ming Jen, Beng Wah Chua

J. Manuf. Sci. Eng. October 2015, 137(5): 051004. doi: https://doi.org/10.1115/1.4031021

Abstract

View articletitled, Effect of Deformation and Temperature Paths in Severe Plastic Deformation Using Groove Pressing on Microstructure, Texture, and Mechanical Properties of AZ31-O

Open the PDF for in another window

Topics: Cycles , Deformation , Mechanical properties , Temperature , Texture (Materials) , Pressing , Alloys , Simulation

Residual Stresses Due to Rigid Cylinder Indentation and Rolling at a Very High Rolling Load

M. Y. Ali, J. Pan

J. Manuf. Sci. Eng. October 2015, 137(5): 051005. doi: https://doi.org/10.1115/1.4031067

Abstract

View articletitled, Residual Stresses Due to Rigid Cylinder Indentation and Rolling at a Very High Rolling Load

Open the PDF for in another window

Topics: Finite element analysis , Residual stresses , Rollers , Stress , Pressure , Cylinders

Formability Enhancement in Titanium Tube-Flaring by Manipulating the Deformation Path

Chetan P. Nikhare, Yannis P. Korkolis, Brad L. Kinsey

J. Manuf. Sci. Eng. October 2015, 137(5): 051006. doi: https://doi.org/10.1115/1.4030512

Abstract

View articletitled, Formability Enhancement in Titanium Tube-Flaring by Manipulating the Deformation Path

Open the PDF for in another window

Topics: Computer simulation , Deformation , Failure , Geometry , Necking , Shapes , Displacement , Simulation , Titanium

A Mixed Double-Sided Incremental Forming Toolpath Strategy for Improved Geometric Accuracy

Zixuan Zhang, Huaqing Ren, Rui Xu, Newell Moser, Jacob Smith, Ebot Ndip-Agbor, Rajiv Malhotra, Z. Cedric Xia, Kornel F. Ehmann, Jian Cao

J. Manuf. Sci. Eng. October 2015, 137(5): 051007. doi: https://doi.org/10.1115/1.4031092

Abstract

View articletitled, A Mixed Double-Sided Incremental Forming Toolpath Strategy for Improved Geometric Accuracy

Open the PDF for in another window

Topics: Errors , Geometry , Manufacturing , Metals , Sheet metal , Tooling , Trajectories (Physics) , Design for Manufacturing , Rapid prototyping , Stereolithography

Effects of Tool Positions in Accumulated Double-Sided Incremental Forming on Part Geometry

Huaqing Ren, Newell Moser, Zixuan Zhang, Ebot Ndip-Agbor, Jacob Smith, Kornel F. Ehmann, Jian Cao

J. Manuf. Sci. Eng. October 2015, 137(5): 051008. doi: https://doi.org/10.1115/1.4030528

Abstract

View articletitled, Effects of Tool Positions in Accumulated Double-Sided Incremental Forming on Part Geometry

Open the PDF for in another window

Topics: Deformation , Design , Geometry , Simulation , Simulation models , Shapes

Forming of Al 5182-O in a Servo Press at Room and Elevated Temperatures

Long Ju, Shrinivas Patil, Jim Dykeman, Taylan Altan

J. Manuf. Sci. Eng. October 2015, 137(5): 051009. doi: https://doi.org/10.1115/1.4030334

Abstract

View articletitled, Forming of Al 5182-O in a Servo Press at Room and Elevated Temperatures

Open the PDF for in another window

Topics: Aluminum alloys , Blanks , Finite element model , Flow (Dynamics) , Servomechanism presses , Simulation , Stress , Temperature , Corners (Structural elements) , Lubricants

Evaluation of Lubricants for Stamping of Al 5182-O Aluminum Sheet Using Cup Drawing Test

Long Ju, Tingting Mao, Julio Malpica, Taylan Altan

J. Manuf. Sci. Eng. October 2015, 137(5): 051010. doi: https://doi.org/10.1115/1.4030750

Abstract

View articletitled, Evaluation of Lubricants for Stamping of Al 5182-O Aluminum Sheet Using Cup Drawing Test

Open the PDF for in another window

Topics: Aluminum , Lubricants , Simulation , Metal stamping , Flanges , Lubrication , Surface texture

Thermoforming and Structural Analysis of Combat Helmets

Bruce K. Cartwright, N. Lex Mulcahy, Allen O. Chhor, Stuart G. F. Thomas, Madhusudan Suryanarayana, James D. Sandlin, Ian G. Crouch, Minoo Naebe

J. Manuf. Sci. Eng. October 2015, 137(5): 051011. doi: https://doi.org/10.1115/1.4031154

Abstract

View articletitled, Thermoforming and Structural Analysis of Combat Helmets

Open the PDF for in another window

Topics: Fibers , Shells , Simulation , Spectra (Spectroscopy) , Stress , Structural analysis , Testing , Warfare , Computer simulation , Composite materials

The Effect of Fiber Orientation on the Formability and Failure Behavior of a Woven Self-Reinforced Composite

Nima A. Zanjani, Wentian Wang, Shankar Kalyanasundaram

J. Manuf. Sci. Eng. October 2015, 137(5): 051012. doi: https://doi.org/10.1115/1.4030894

Abstract

View articletitled, The Effect of Fiber Orientation on the Formability and Failure Behavior of a Woven Self-Reinforced Composite

Open the PDF for in another window

Topics: Composite materials , Deformation , Failure , Fibers , Shear (Mechanics) , Failure mechanisms , Yarns , Woven composites

Joining

Impact Welding of Aluminum Alloys 6061 and 5052 by Vaporizing Foil Actuators: Heat-Affected Zone Size and Peel Strength

Steven R. Hansen, Anupam Vivek, Glenn S. Daehn

J. Manuf. Sci. Eng. October 2015, 137(5): 051013. doi: https://doi.org/10.1115/1.4030934

Abstract

View articletitled, Impact Welding of Aluminum Alloys 6061 and 5052 by Vaporizing Foil Actuators: Heat-Affected Zone Size and Peel Strength

Open the PDF for in another window

Topics: Actuators , Aluminum alloys , Heat , Welding , Testing , Welded joints , Joining , Manufacturing , Buses , Railroad passenger cars

Analytical Model to Determine the Strength of Form-Fit Connection Joined by Die-Less Hydroforming

Christian Weddeling, Soeren Gies, Nooman Ben Khalifa, A. Erman Tekkaya

J. Manuf. Sci. Eng. October 2015, 137(5): 051014. doi: https://doi.org/10.1115/1.4030878

Abstract

View articletitled, Analytical Model to Determine the Strength of Form-Fit Connection Joined by Die-Less Hydroforming

Open the PDF for in another window

Topics: Joining , Pressure , Stress , Geometry

Mechanism of Hydrojoining and Approach to Increase Torsion Strength of Assembled Camshafts

Gang Liu, Junfeng Lin, Shijian Yuan, Qiang Liu, Guilin Gao

J. Manuf. Sci. Eng. October 2015, 137(5): 051015. doi: https://doi.org/10.1115/1.4031094

Abstract

View articletitled, Mechanism of Hydrojoining and Approach to Increase Torsion Strength of Assembled Camshafts

Open the PDF for in another window

Topics: Camshafts , Deformation , Displacement , Hoop stress , Joining , Pressure , Shapes , Torsion , Cams , Stress

Influence of Kinematics During Roller Clinching on Joint Properties

Maria Weiss, Wolfram Volk

J. Manuf. Sci. Eng. October 2015, 137(5): 051016. doi: https://doi.org/10.1115/1.4030671

Abstract

View articletitled, Influence of Kinematics During Roller Clinching on Joint Properties

Open the PDF for in another window

Topics: Kinematics , Rollers , Joining , Shear (Mechanics)

Thermal Mechanical Modeling of the Plunge Stage During Friction-Stir Welding of Dissimilar Al 6061 to TRIP 780 Steel

Xun Liu, Shuhuai Lan, Jun Ni

J. Manuf. Sci. Eng. October 2015, 137(5): 051017. doi: https://doi.org/10.1115/1.4031188

Abstract

View articletitled, Thermal Mechanical Modeling of the Plunge Stage During Friction-Stir Welding of Dissimilar Al 6061 to TRIP 780 Steel

Open the PDF for in another window

Topics: Friction , Joining , Steel , Welding , Bulk solids , Aluminum , Temperature , Modeling , Finite element model , Flow (Dynamics)

Formation and Structure of Work Material in the Friction Stir Forming Process

Sladjan Lazarevic, Kenneth A. Ogata, Scott F. Miller, Grant H. Kruger, Blair E. Carlson

J. Manuf. Sci. Eng. October 2015, 137(5): 051018. doi: https://doi.org/10.1115/1.4030641

Abstract

View articletitled, Formation and Structure of Work Material in the Friction Stir Forming Process

Open the PDF for in another window

Topics: Aluminum , Cavities , Friction , Joining , Steel , Deformation , Design , Heat , Shear (Mechanics)

Effect of Thermal Assistance on the Joint Quality of Al6063-T5A During Flow Drill Screwdriving

Jamie D. Skovron, R. Rohan Prasad, Durul Ulutan, Laine Mears, Duane Detwiler, Daniel Paolini, Boris Baeumler, Laurence Claus

J. Manuf. Sci. Eng. October 2015, 137(5): 051019. doi: https://doi.org/10.1115/1.4031242

Abstract

View articletitled, Effect of Thermal Assistance on the Joint Quality of Al6063-T5A During Flow Drill Screwdriving

Open the PDF for in another window

Topics: Temperature , Heat , Torque , Fasteners , Flow (Dynamics)

Effects of Nonconventional Tools on the Thermo-Mechanical Response of Friction Stir Welded Materials

George N. Lampeas, Ioannis D. Diamantakos

J. Manuf. Sci. Eng. October 2015, 137(5): 051020. doi: https://doi.org/10.1115/1.4029857

Abstract

View articletitled, Effects of Nonconventional Tools on the Thermo-Mechanical Response of Friction Stir Welded Materials

Open the PDF for in another window

Topics: Friction , Heat , Temperature , Thermomechanics , Welding , Simulation , Stress

Microstructure Stability During Creep of Friction Stir Welded AZ31B Magnesium Alloy

Michael Regev, Stefano Spigarelli, Marcello Cabibbo

J. Manuf. Sci. Eng. October 2015, 137(5): 051021. doi: https://doi.org/10.1115/1.4030879

Abstract

View articletitled, Microstructure Stability During Creep of Friction Stir Welded AZ31B Magnesium Alloy

Open the PDF for in another window

Topics: Creep , Friction , Welding , Twinning , Temperature , Magnesium alloys , Recrystallization

Friction Stir Blind Riveting for Joining Dissimilar Cast Mg AM60 and Al Alloy Sheets

Junying Min, Jingjing Li, Blair E. Carlson, Yongqiang Li, James F. Quinn, Jianping Lin, Weiming Wang

J. Manuf. Sci. Eng. October 2015, 137(5): 051022. doi: https://doi.org/10.1115/1.4030156

Abstract

View articletitled, Friction Stir Blind Riveting for Joining Dissimilar Cast Mg AM60 and Al Alloy Sheets

Open the PDF for in another window

Topics: Aluminum alloys , Friction , Heat , Joining , Riveting , Rivets , Stress , Shear (Mechanics) , Fracture (Materials) , Displacement

Failure Mode and Fatigue Behavior of Dissimilar Friction Stir Spot Welds in Lap-Shear Specimens of Transformation-Induced Plasticity Steel and Hot-Stamped Boron Steel Sheets

S. H. Hong, S.-J. Sung, J. Pan

J. Manuf. Sci. Eng. October 2015, 137(5): 051023. doi: https://doi.org/10.1115/1.4031235

Abstract

View articletitled, Failure Mode and Fatigue Behavior of Dissimilar Friction Stir Spot Welds in Lap-Shear Specimens of Transformation-Induced Plasticity Steel and Hot-Stamped Boron Steel Sheets

Open the PDF for in another window

Topics: Failure , Failure mechanisms , Fatigue , Fracture (Materials) , Friction , Shear (Mechanics) , Steel , Stress , Welded joints , Boron

Effect of Adhesive Nanoparticle Enrichment on Static Load Transfer Capacity and Failure Mode of Bonded Steel–Magnesium Single Lap Joints

Sayed A. Nassar, Zhijun Wu, Kassem Moustafa, Demetrios Tzelepis

J. Manuf. Sci. Eng. October 2015, 137(5): 051024. doi: https://doi.org/10.1115/1.4030081

Abstract

View articletitled, Effect of Adhesive Nanoparticle Enrichment on Static Load Transfer Capacity and Failure Mode of Bonded Steel–Magnesium Single Lap Joints

Open the PDF for in another window

Topics: Adhesives , Failure mechanisms , Magnesium (Metal) , Nanoparticles , Particulate matter , Steel , Stress , Surface preparation

Clamp Load Decay Due to Material Creep of Lightweight-Material Joints Under Cyclic Temperature

Sayed A. Nassar, Amir Kazemi

J. Manuf. Sci. Eng. October 2015, 137(5): 051025. doi: https://doi.org/10.1115/1.4029830

Abstract

View articletitled, Clamp Load Decay Due to Material Creep of Lightweight-Material Joints Under Cyclic Temperature

Open the PDF for in another window

Topics: Clamps (Tools) , Creep , Finite element analysis , Stress , Temperature , Magnesium (Metal) , Aluminum , Steel

Effect of Cyclic Heat, Humidity, and Joining Method on the Static and Dynamic Performance of Lightweight Multimaterial Single-Lap Joints

Sayed A. Nassar, Kaori Sakai

J. Manuf. Sci. Eng. October 2015, 137(5): 051026. doi: https://doi.org/10.1115/1.4030080

Abstract

View articletitled, Effect of Cyclic Heat, Humidity, and Joining Method on the Static and Dynamic Performance of Lightweight Multimaterial Single-Lap Joints

Open the PDF for in another window

Topics: Composite materials , Durability , Heat , Joining , Steel , Stress , Magnesium (Metal) , Bonding , Aluminum , Glass reinforced plastics

Influence of Weld Defects and Postweld Heat Treatment of Gas Tungsten Arc-Welded AA-6061-T651 Aluminum Alloy

Mohammad W. Dewan, M. A. Wahab, Ayman M. Okeil

J. Manuf. Sci. Eng. October 2015, 137(5): 051027. doi: https://doi.org/10.1115/1.4030333

Abstract

View articletitled, Influence of Weld Defects and Postweld Heat Treatment of Gas Tungsten Arc-Welded AA-6061-T651 Aluminum Alloy

Open the PDF for in another window

Topics: Aluminum alloys , Fracture toughness , Heat treating (Metalworking) , Tensile strength , Welding , Tungsten

Cold Metal Transfer Spot Joining of AA6061-T6 to Galvanized DP590 Under Different Modes

HaiYang Lei, YongBing Li, Blair E. Carlson, ZhongQin Lin

J. Manuf. Sci. Eng. October 2015, 137(5): 051028. doi: https://doi.org/10.1115/1.4029093

Abstract

View articletitled, Cold Metal Transfer Spot Joining of AA6061-T6 to Galvanized DP590 Under Different Modes

Open the PDF for in another window

Topics: Aluminum , Joining , Welding , Metals , Heat , Steel

Technical Brief

Effect of Rivet Hardness and Geometrical Features on Friction Self-Piercing Riveted Joint Quality

Yunwu Ma, Ming Lou, Zhou Yang, Yongbing Li

J. Manuf. Sci. Eng. October 2015, 137(5): 054501. doi: https://doi.org/10.1115/1.4029822

Abstract

View articletitled, Effect of Rivet Hardness and Geometrical Features on Friction Self-Piercing Riveted Joint Quality

Open the PDF for in another window

Topics: Rivets , Friction

Issues

Guest Editorial

Research Papers

Forming

Joining

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only