Volume 136 Issue 2 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 136, Issue 2

April 2014

ISSN 1087-1357

EISSN 1528-8935

Research Papers

Prediction of Cutting Time When Crosscutting Rounds, Pipe, and Rectangular Bar With a Gravity Fed Portable Bandsaw

Amrit Sagar, Thomas P. James

J. Manuf. Sci. Eng. April 2014, 136(2): 021001. doi: https://doi.org/10.1115/1.4025565

Abstract

View articletitled, Prediction of Cutting Time When Crosscutting Rounds, Pipe, and Rectangular Bar With a Gravity Fed Portable Bandsaw

Open the PDF for in another window

Topics: Blades , Cutting , Pipes , Band saws , Thrust

Fabrication of Small Pore-Size Nickel Foams Using Electroless Plating of Solid-State Foamed Immiscible Polymer Blends

Sriharsha S. Sundarram, Wei Jiang, Wei Li

J. Manuf. Sci. Eng. April 2014, 136(2): 021002. doi: https://doi.org/10.1115/1.4025418

Abstract

View articletitled, Fabrication of Small Pore-Size Nickel Foams Using Electroless Plating of Solid-State Foamed Immiscible Polymer Blends

Open the PDF for in another window

Topics: Electroless plating , Foams (Chemistry) , Manufacturing , Nickel , Polymers , Temperature , Polymer blends , Ethanol , Porosity

Effects of Contact Force Model and Size Distribution on Microsized Granular Packing

Xin Dou, Yijin Mao, Yuwen Zhang

J. Manuf. Sci. Eng. April 2014, 136(2): 021003. doi: https://doi.org/10.1115/1.4025969

Abstract

View articletitled, Effects of Contact Force Model and Size Distribution on Microsized Granular Packing

Open the PDF for in another window

Topics: Packing (Shipments) , Packings (Cushioning) , Particulate matter , Van der Waals forces

Study of Droplet Spray Behavior of an Atomization-Based Cutting Fluid Spray System for Machining Titanium Alloys

Chandra Nath, Shiv G. Kapoor, Anil K. Srivastava, Jon Iverson

J. Manuf. Sci. Eng. April 2014, 136(2): 021004. doi: https://doi.org/10.1115/1.4025504

Abstract

View articletitled, Study of Droplet Spray Behavior of an Atomization-Based Cutting Fluid Spray System for Machining Titanium Alloys

Open the PDF for in another window

Topics: Drops , Sprays , Machining , Cutting , Fluids , Flow (Dynamics)

A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram

Raphael Galdino dos Santos, Reginaldo Teixeira Coelho

J. Manuf. Sci. Eng. April 2014, 136(2): 021005. doi: https://doi.org/10.1115/1.4025514

Abstract

View articletitled, A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram

Open the PDF for in another window

Topics: Chatter , Machine tools , Milling , Stability , Vibration , Machinery

Effect of Film Formation Method and Annealing on Morphology and Crystal Structure of Poly(L-Lactic Acid) Films

Shan-Ting Hsu, Y. Lawrence Yao

J. Manuf. Sci. Eng. April 2014, 136(2): 021006. doi: https://doi.org/10.1115/1.4025909

Abstract

View articletitled, Effect of Film Formation Method and Annealing on Morphology and Crystal Structure of Poly(L-Lactic Acid) Films

Open the PDF for in another window

Topics: Annealing , Crystal structure , Crystallization , Rotation , Spin (Aerodynamics) , Chain , Temperature , Crystals

Combined Temperature and Force Control for Robotic Friction Stir Welding

Axel Fehrenbacher, Christopher B. Smith, Neil A. Duffie, Nicola J. Ferrier, Frank E. Pfefferkorn, Michael R. Zinn

J. Manuf. Sci. Eng. April 2014, 136(2): 021007. doi: https://doi.org/10.1115/1.4025912

Abstract

View articletitled, Combined Temperature and Force Control for Robotic Friction Stir Welding

Open the PDF for in another window

Topics: Force control , Robotics , Temperature , Welding , Control equipment , Friction , Control systems

Real-Time Identification of Incipient Surface Morphology Variations in Ultraprecision Machining Process

Prahalad Rao, Satish Bukkapatnam, Omer Beyca, Zhenyu (James) Kong, Ranga Komanduri

J. Manuf. Sci. Eng. April 2014, 136(2): 021008. doi: https://doi.org/10.1115/1.4026210

Abstract

View articletitled, Real-Time Identification of Incipient Surface Morphology Variations in Ultraprecision Machining Process

Open the PDF for in another window

Topics: Machining , Sensors , Signals , Vibration , Dynamics (Mechanics) , Finishes

Measurement of Tool-Workpiece Interface Temperature Distribution in Friction Stir Welding

Axel Fehrenbacher, Joshua R. Schmale, Michael R. Zinn, Frank E. Pfefferkorn

J. Manuf. Sci. Eng. April 2014, 136(2): 021009. doi: https://doi.org/10.1115/1.4026115

Abstract

View articletitled, Measurement of Tool-Workpiece Interface Temperature Distribution in Friction Stir Welding

Open the PDF for in another window

Topics: Friction , Temperature , Temperature distribution , Temperature measurement , Welding , Thermocouples

Effect of Profile Corners on the Nitriding Treatment of AISI H13 Hot Extrusion Dies

Syed Sohail Akhtar, Abul Fazal M. Arif

J. Manuf. Sci. Eng. April 2014, 136(2): 021010. doi: https://doi.org/10.1115/1.4025911

Abstract

View articletitled, Effect of Profile Corners on the Nitriding Treatment of AISI H13 Hot Extrusion Dies

Open the PDF for in another window

Topics: Corners (Structural elements) , Nitriding , Nitrogen , Steel , Diffusion (Physics) , Extruding

“Adult” Robot Enabled Learning Process in High Precision Assembly Automation

Hongtai Cheng, Heping Chen

J. Manuf. Sci. Eng. April 2014, 136(2): 021011. doi: https://doi.org/10.1115/1.4026084

Abstract

View articletitled, “Adult” Robot Enabled Learning Process in High Precision Assembly Automation

Open the PDF for in another window

Topics: Robots , Teaching , Manufacturing

An Analytical Method for Prediction of Limiting Drawing Ratio For Redrawing Stages of Axisymmetric Deep Drawn Components

Ali Fazli, Behrooz Arezoo

J. Manuf. Sci. Eng. April 2014, 136(2): 021012. doi: https://doi.org/10.1115/1.4026125

Abstract

View articletitled, An Analytical Method for Prediction of Limiting Drawing Ratio For Redrawing Stages of Axisymmetric Deep Drawn Components

Open the PDF for in another window

Topics: Blanks , Stress , Annealing

Determination of the Active Medium Temperature in Media Based Press Hardening Processes

Welf-Guntram Drossel, Norbert Pierschel, Alexander Paul, Klaus Katzfuß, Rico Demuth

J. Manuf. Sci. Eng. April 2014, 136(2): 021013. doi: https://doi.org/10.1115/1.4025812

Abstract

View articletitled, Determination of the Active Medium Temperature in Media Based Press Hardening Processes

Open the PDF for in another window

Topics: Temperature , Pressure , Cooling , Hardening

Refinement of the Thermal Press Curing Process for Advanced Composites

Jaron Kuppers, Daniel Walczyk

J. Manuf. Sci. Eng. April 2014, 136(2): 021014. doi: https://doi.org/10.1115/1.4026043

Abstract

View articletitled, Refinement of the Thermal Press Curing Process for Advanced Composites

Open the PDF for in another window

Topics: Composite materials , Hardening (Curing) , Pressure , Rubber , Vacuum , Manufacturing , Temperature , Shapes , Design

A Theoretical Assessment of Surface Defect Machining and Hot Machining of Nanocrystalline Silicon Carbide

Saurav Goel, Waleed Bin Rashid, Xichun Luo, Anupam Agrawal, V. K. Jain

J. Manuf. Sci. Eng. April 2014, 136(2): 021015. doi: https://doi.org/10.1115/1.4026297

Abstract

View articletitled, A Theoretical Assessment of Surface Defect Machining and Hot Machining of Nanocrystalline Silicon Carbide

Open the PDF for in another window

Topics: Cutting , Machining , Molecular dynamics simulation , Silicon , Stress , Cutting tools , Temperature

Edge Fracture Prediction of Traditional and Advanced Trimming Processes for AA6111-T4 Sheets

X. H. Hu, K. S. Choi, X. Sun, S. F. Golovashchenko

J. Manuf. Sci. Eng. April 2014, 136(2): 021016. doi: https://doi.org/10.1115/1.4026273

Abstract

View articletitled, Edge Fracture Prediction of Traditional and Advanced Trimming Processes for AA6111-T4 Sheets

Open the PDF for in another window

Topics: Blanks , Clearances (Engineering) , Damage , Fracture (Materials) , Simulation , Fracture (Process) , Blanking (Metalworking) , Die cutting , Deformation , Stress

Application of Bayesian Inference to Milling Force Modeling

Jaydeep M. Karandikar, Tony L. Schmitz, Ali E. Abbas

J. Manuf. Sci. Eng. April 2014, 136(2): 021017. doi: https://doi.org/10.1115/1.4026365

Abstract

View articletitled, Application of Bayesian Inference to Milling Force Modeling

Open the PDF for in another window

Topics: Algorithms , Chain , Milling , Uncertainty , Modeling , Cutting

Finite Element Simulation of Process Control for Bolt Tightening in Joints With Nonparallel Contact

Saravanan Ganeshmurthy, Sayed A. Nassar

J. Manuf. Sci. Eng. April 2014, 136(2): 021018. doi: https://doi.org/10.1115/1.4025830

Abstract

View articletitled, Finite Element Simulation of Process Control for Bolt Tightening in Joints With Nonparallel Contact

Open the PDF for in another window

Topics: Finite element analysis , Process control , Tension , Torque , Wedges , Simulation , Friction , Thread , Clearances (Engineering)

Technical Brief

Deburring Effect of Plasma Produced by Nanosecond Laser Ablation

Yun Zhou, Yibo Gao, Benxin Wu, Sha Tao, Ze Liu

J. Manuf. Sci. Eng. April 2014, 136(2): 024501. doi: https://doi.org/10.1115/1.4025910

Abstract

View articletitled, Deburring Effect of Plasma Produced by Nanosecond Laser Ablation

Open the PDF for in another window

Topics: Deburring , Laser ablation , Lasers , Microchannels , Plasmas (Ionized gases)

Numerical and Experimental Study of Temperature Field for Double Electrode Gas Metal Arc Welding

Yu Shi, Rihong Han, Jiankang Huang, Shao Yan

J. Manuf. Sci. Eng. April 2014, 136(2): 024502. doi: https://doi.org/10.1115/1.4025392

Abstract

View articletitled, Numerical and Experimental Study of Temperature Field for Double Electrode Gas Metal Arc Welding

Open the PDF for in another window

Topics: Base metals , Gas metal arc welding , Heat , Temperature , Welding , Electrodes , Simulation results , Simulation

Design for Manufacturing and Assembly Cost Estimate Methodology for Transportation Fuel Cell Systems

Brian D. James, Andrew B. Spisak, Whitney G. Colella

J. Manuf. Sci. Eng. April 2014, 136(2): 024503. doi: https://doi.org/10.1115/1.4025624

Abstract

View articletitled, Design for Manufacturing and Assembly Cost Estimate Methodology for Transportation Fuel Cell Systems

Open the PDF for in another window

Topics: Design , Design for Manufacturing , Fuel cells , Manufacturing , Modeling , Transportation systems , Conceptual design , Trains , Proton exchange membranes , Project cost estimation

Research Papers

Prediction of Cutting Time When Crosscutting Rounds, Pipe, and Rectangular Bar With a Gravity Fed Portable Bandsaw

Fabrication of Small Pore-Size Nickel Foams Using Electroless Plating of Solid-State Foamed Immiscible Polymer Blends

Effects of Contact Force Model and Size Distribution on Microsized Granular Packing

Study of Droplet Spray Behavior of an Atomization-Based Cutting Fluid Spray System for Machining Titanium Alloys

A Contribution to Improve the Accuracy of Chatter Prediction in Machine Tools Using the Stability Lobe Diagram

Effect of Film Formation Method and Annealing on Morphology and Crystal Structure of Poly(L-Lactic Acid) Films

Combined Temperature and Force Control for Robotic Friction Stir Welding

Real-Time Identification of Incipient Surface Morphology Variations in Ultraprecision Machining Process

Measurement of Tool-Workpiece Interface Temperature Distribution in Friction Stir Welding

Effect of Profile Corners on the Nitriding Treatment of AISI H13 Hot Extrusion Dies

“Adult” Robot Enabled Learning Process in High Precision Assembly Automation

An Analytical Method for Prediction of Limiting Drawing Ratio For Redrawing Stages of Axisymmetric Deep Drawn Components

Determination of the Active Medium Temperature in Media Based Press Hardening Processes

Refinement of the Thermal Press Curing Process for Advanced Composites

A Theoretical Assessment of Surface Defect Machining and Hot Machining of Nanocrystalline Silicon Carbide

Edge Fracture Prediction of Traditional and Advanced Trimming Processes for AA6111-T4 Sheets

Application of Bayesian Inference to Milling Force Modeling

Finite Element Simulation of Process Control for Bolt Tightening in Joints With Nonparallel Contact

Technical Brief

Deburring Effect of Plasma Produced by Nanosecond Laser Ablation

Numerical and Experimental Study of Temperature Field for Double Electrode Gas Metal Arc Welding

Design for Manufacturing and Assembly Cost Estimate Methodology for Transportation Fuel Cell Systems

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only