Volume 132 Issue 1 | J. Manuf. Sci. Eng.

Topics: Cutting , Glass , Laser beams , Lasers , Sheet glass , Geometry , Fracture (Materials) , Finite element analysis , Laser cutting , Temperature

Experimental Study on Viscosity and Phase Segregation of Al–Si Powders in Microsemisolid Powder Forming

Yufeng Wu, Gap-Yong Kim, Iver E. Anderson, Thomas A. Lograsso

J. Manuf. Sci. Eng. February 2010, 132(1): 011003. doi: https://doi.org/10.1115/1.4000636

Abstract

View articletitled, Experimental Study on Viscosity and Phase Segregation of Al–Si Powders in Microsemisolid Powder Forming

Open the PDF for in another window

Topics: Extruding , Viscosity , Shear rate , Heating , Pressure

Polymer Film Production: Modeling and Control of the Forward Draw

C. R. MacLaine, P. Acarnley, J. Shanahan, P. Mousalli, M. Deighton

J. Manuf. Sci. Eng. February 2010, 132(1): 011004. doi: https://doi.org/10.1115/1.4000712

Abstract

View articletitled, Polymer Film Production: Modeling and Control of the Forward Draw

Open the PDF for in another window

Topics: Rollers , Tension , Feedforward control

Focused Ion-Beam Based Nanohole Modeling, Simulation, Fabrication, and Application

Jack Zhou, Guoliang Yang

J. Manuf. Sci. Eng. February 2010, 132(1): 011005. doi: https://doi.org/10.1115/1.4000617

Abstract

View articletitled, Focused Ion-Beam Based Nanohole Modeling, Simulation, Fabrication, and Application

Open the PDF for in another window

Topics: Manufacturing , Milling , Modeling , Thin films , Simulation , Machining , Etching , DNA , Sputtering (Irradiation) , Focused ion beams

The Impact of Surface Forces on Particle Flow and Membrane Fouling in the Microfiltration of Metalworking Fluids

Seounghyun Ham, Shiv G. Kapoor, Richard E. DeVor, John Wentz

J. Manuf. Sci. Eng. February 2010, 132(1): 011006. doi: https://doi.org/10.1115/1.4000714

Abstract

View articletitled, The Impact of Surface Forces on Particle Flow and Membrane Fouling in the Microfiltration of Metalworking Fluids

Open the PDF for in another window

Topics: Brownian motion , Fluids , Membranes , Microfiltration , Particulate matter , Simulation , Metalworking , Particle size , Fluid-dynamic forces , Geometry

Automated Part Centering With Impulse Actuation

S. J. Furst, T. A. Dow, K. Garrard, A. Sohn

J. Manuf. Sci. Eng. February 2010, 132(1): 011007. doi: https://doi.org/10.1115/1.4000681

Abstract

View articletitled, Automated Part Centering With Impulse Actuation

Open the PDF for in another window

Topics: Actuators , Displacement , Friction , Impulse (Physics) , Measurement uncertainty , Design , Testing , Errors

Development Process for Custom Three-Dimensional Printing (3DP) Material Systems

Ben R. Utela, Duane Storti, Rhonda L. Anderson, Mark Ganter

J. Manuf. Sci. Eng. February 2010, 132(1): 011008. doi: https://doi.org/10.1115/1.4000713

Abstract

View articletitled, Development Process for Custom Three-Dimensional Printing (3DP) Material Systems

Open the PDF for in another window

Topics: Additive manufacturing , Binders (Materials) , Ceramics , Inks , Printing , Particulate matter , Testing , Sintering

Micromachining of Metals, Alloys, and Ceramics by Picosecond Laser Ablation

Wenqian Hu, Yung C. Shin, Galen B. King

J. Manuf. Sci. Eng. February 2010, 132(1): 011009. doi: https://doi.org/10.1115/1.4000836

Abstract

View articletitled, Micromachining of Metals, Alloys, and Ceramics by Picosecond Laser Ablation

Open the PDF for in another window

Topics: Drilling , Laser ablation , Lasers , Machining , Metals , Micromachining , Alloys , Ceramics , Ablation (Vaporization technology)

Melt Pool Temperature Control for Laser Metal Deposition Processes—Part I: Online Temperature Control

Lie Tang, Robert G. Landers

J. Manuf. Sci. Eng. February 2010, 132(1): 011010. doi: https://doi.org/10.1115/1.4000882

Abstract

View articletitled, Melt Pool Temperature Control for Laser Metal Deposition Processes—Part I: Online Temperature Control

Open the PDF for in another window

Topics: Lasers , Temperature , Flow (Dynamics) , Temperature control

Melt Pool Temperature Control for Laser Metal Deposition Processes—Part II: Layer-to-Layer Temperature Control

Lie Tang, Robert G. Landers

J. Manuf. Sci. Eng. February 2010, 132(1): 011011. doi: https://doi.org/10.1115/1.4000883

Abstract

View articletitled, Melt Pool Temperature Control for Laser Metal Deposition Processes—Part II: Layer-to-Layer Temperature Control

Open the PDF for in another window

Topics: Lasers , Particle swarm optimization , Temperature , Temperature control , Iterative learning control , Metals , Algorithms

Waterjet and Water-Air Jet Surface Processing of a Titanium Alloy: A Parametric Evaluation

Alex Chillman, M. Ramulu, M. Hashish

J. Manuf. Sci. Eng. February 2010, 132(1): 011012. doi: https://doi.org/10.1115/1.4000837

Abstract

View articletitled, Waterjet and Water-Air Jet Surface Processing of a Titanium Alloy: A Parametric Evaluation

Open the PDF for in another window

Topics: Air flow , Erosion , Nozzles , Pressure , Shot peening , Surface roughness , Titanium alloys , Water , Corrosion resistance , Surface preparation

Temperature Gradient Mechanism on Laser Bending of Borosilicate Glass Sheet

Dongjiang Wu, Guangyi Ma, Fangyong Niu, Dongming Guo

J. Manuf. Sci. Eng. February 2010, 132(1): 011013. doi: https://doi.org/10.1115/1.4000722

Abstract

View articletitled, Temperature Gradient Mechanism on Laser Bending of Borosilicate Glass Sheet

Open the PDF for in another window

Topics: Fracture (Materials) , Glass , Lasers , Temperature gradient , Borosilicate glasses , Heat resistant glass , Temperature

New Models and Global Stability Charts to Avoid Principal Instabilities and Constraints in Throughfeed Centerless Grinding

D. Barrenetxea, J. Álvarez, J. I. Marquínez, J. Madariaga, I. Gallego, I. Muguerza Perelló

J. Manuf. Sci. Eng. February 2010, 132(1): 011014. doi: https://doi.org/10.1115/1.4000931

Abstract

View articletitled, New Models and Global Stability Charts to Avoid Principal Instabilities and Constraints in Throughfeed Centerless Grinding

Open the PDF for in another window

Topics: Grinding , Stability , Wheels , Spin (Aerodynamics) , Spinning (Textile) , Surface roughness

Adaptive Control of Pressure Tracking for Polishing Process

Liang Liao, Fengfeng Jeff Xi, Kefu Liu

J. Manuf. Sci. Eng. February 2010, 132(1): 011015. doi: https://doi.org/10.1115/1.4000959

Abstract

View articletitled, Adaptive Control of Pressure Tracking for Polishing Process

Open the PDF for in another window

Topics: Adaptive control , Polishing , Pressure , Stress , Design , Control equipment

Local Thinning at a Die Entry Radius During Hot Gas-Pressure Forming of an AA5083 Sheet

Eric M. Taleff, Louis G. Hector, Jr., John R. Bradley, Ravi Verma, Paul E. Krajewski

J. Manuf. Sci. Eng. February 2010, 132(1): 011016. doi: https://doi.org/10.1115/1.4000884

Abstract

View articletitled, Local Thinning at a Die Entry Radius During Hot Gas-Pressure Forming of an AA5083 Sheet

Open the PDF for in another window

Topics: Finite element methods , Finite element model , Friction , Pressure , Simulation , Engineering simulation , Sheet materials , Finite element analysis , Geometry

Droplet Behavior on a Rotating Surface for Atomization-Based Cutting Fluid Application in Micromachining

Isha Ghai, John Wentz, Richard E. DeVor, Shiv G. Kapoor, Johnson Samuel

J. Manuf. Sci. Eng. February 2010, 132(1): 011017. doi: https://doi.org/10.1115/1.4000859

Abstract

View articletitled, Droplet Behavior on a Rotating Surface for Atomization-Based Cutting Fluid Application in Micromachining

Open the PDF for in another window

Topics: Cutting , Drops , Fluids , Viscosity , Surface tension

Deformation Size Effects Due to Specimen and Grain Size in Microbending

Sunal Ahmet Parasiz, Reid VanBenthysen, Brad L. Kinsey

J. Manuf. Sci. Eng. February 2010, 132(1): 011018. doi: https://doi.org/10.1115/1.4000943

Abstract

View articletitled, Deformation Size Effects Due to Specimen and Grain Size in Microbending

Open the PDF for in another window

Topics: Deformation , Grain size , Microhardness

Technical Briefs

A New Method for Discharge State Prediction of Micro-EDM Using Empirical Mode Decomposition

Zhenyuan Jia, Lingxuan Zhang, Fuji Wang, Wei Liu

J. Manuf. Sci. Eng. February 2010, 132(1): 014501. doi: https://doi.org/10.1115/1.4000559

Abstract

View articletitled, A New Method for Discharge State Prediction of Micro-EDM Using Empirical Mode Decomposition

Open the PDF for in another window

Topics: Data fusion , Electrical discharge machining , Fuzzy logic , Signals

Develop a Robot-Aided Area Sensing System for 3D Shape Inspection

Quan Shi, Ning Xi, Chi Zhang

J. Manuf. Sci. Eng. February 2010, 132(1): 014502. doi: https://doi.org/10.1115/1.4000756

Abstract

View articletitled, Develop a Robot-Aided Area Sensing System for 3D Shape Inspection

Open the PDF for in another window

Topics: Inspection , Robots , Sensors , Accuracy and precision , Calibration , Errors , Resolution (Optics) , Coordinate measuring machines , Automotive industry , Design

Simulation of a Refill Friction Stir Spot Welding Process Using a Fully Coupled Thermo-Mechanical FEM Model

Karim H. Muci-Küchler, Sindhura Kalagara, William J. Arbegast

J. Manuf. Sci. Eng. February 2010, 132(1): 014503. doi: https://doi.org/10.1115/1.4000881

Abstract

View articletitled, Simulation of a Refill Friction Stir Spot Welding Process Using a Fully Coupled Thermo-Mechanical FEM Model

Open the PDF for in another window

Topics: Finite element model , Friction , Plates (structures) , Simulation , Temperature , Thermomechanics , Welding , Joining , Stress , Deformation

Study on Spinning Process of a Thin-Walled Aluminum Alloy Vessel Head With Small Ratio of Thickness to Diameter

Yanqiu Zhang, Debin Shan, Wenchen Xu, Yan Lv

J. Manuf. Sci. Eng. February 2010, 132(1): 014504. doi: https://doi.org/10.1115/1.4000930

Abstract

View articletitled, Study on Spinning Process of a Thin-Walled Aluminum Alloy Vessel Head With Small Ratio of Thickness to Diameter

Open the PDF for in another window

Topics: Aluminum alloys , Blanks , Rollers , Spin (Aerodynamics) , Spinning (Textile) , Vessels , Shear (Mechanics) , Simulation , Trajectories (Physics)

Modeling of the Thread Milling Operation in a Combined Thread/Drilling Operation: Thrilling

Martin B. G. Jun, Anna Carla Araujo

J. Manuf. Sci. Eng. February 2010, 132(1): 014505. doi: https://doi.org/10.1115/1.4000944

Abstract

View articletitled, Modeling of the Thread Milling Operation in a Combined Thread/Drilling Operation: Thrilling

Open the PDF for in another window

Topics: Cutting , Drilling , Geometry , Milling , Thread , Model development

Research Papers

Computational Study of the Effect of Governing Parameters on a Polymer Injection Molding Process for Single-Cavity and Multicavity Mold Systems

The Effect of Laser Beam Geometry on Cut Path Deviation in Diode Laser Chip-Free Cutting of Glass

Experimental Study on Viscosity and Phase Segregation of Al–Si Powders in Microsemisolid Powder Forming

Polymer Film Production: Modeling and Control of the Forward Draw

Focused Ion-Beam Based Nanohole Modeling, Simulation, Fabrication, and Application

The Impact of Surface Forces on Particle Flow and Membrane Fouling in the Microfiltration of Metalworking Fluids

Automated Part Centering With Impulse Actuation

Development Process for Custom Three-Dimensional Printing (3DP) Material Systems

Micromachining of Metals, Alloys, and Ceramics by Picosecond Laser Ablation

Melt Pool Temperature Control for Laser Metal Deposition Processes—Part I: Online Temperature Control

Melt Pool Temperature Control for Laser Metal Deposition Processes—Part II: Layer-to-Layer Temperature Control

Waterjet and Water-Air Jet Surface Processing of a Titanium Alloy: A Parametric Evaluation

Temperature Gradient Mechanism on Laser Bending of Borosilicate Glass Sheet

New Models and Global Stability Charts to Avoid Principal Instabilities and Constraints in Throughfeed Centerless Grinding

Adaptive Control of Pressure Tracking for Polishing Process

Local Thinning at a Die Entry Radius During Hot Gas-Pressure Forming of an AA5083 Sheet

Droplet Behavior on a Rotating Surface for Atomization-Based Cutting Fluid Application in Micromachining

Deformation Size Effects Due to Specimen and Grain Size in Microbending

Technical Briefs

A New Method for Discharge State Prediction of Micro-EDM Using Empirical Mode Decomposition

Develop a Robot-Aided Area Sensing System for 3D Shape Inspection

Simulation of a Refill Friction Stir Spot Welding Process Using a Fully Coupled Thermo-Mechanical FEM Model

Study on Spinning Process of a Thin-Walled Aluminum Alloy Vessel Head With Small Ratio of Thickness to Diameter

Modeling of the Thread Milling Operation in a Combined Thread/Drilling Operation: Thrilling

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only