Most plastic processing set points are variables that need to be defined for each sample point of the cycle. However, in the absence of on-line measures of part quality, the set points cannot be defined by feedback and need to be prescribed a priori for the entire cycle. In conventional practice, the shape of each set-point profile is defined either heuristically, according to qualitative experience, or mechanistically, to enforce a predefined trajectory for a simulated internal process state that is used as a surrogate measure of part quality (e.g., the velocity profile defined to dictate a constant melt front velocity). The purpose of this study is twofold: (i) to evaluate the efficacy of using a single internal state as the surrogate of part quality, and (ii) to explore the feasibility of devising a multivariate profiling approach, where indices of multiple process states act as surrogates of part quality. For this study, an injection-compression molding process used for production of digital video disks was considered as the development domain, and a pseudo-optimal cycle of the process was found by reinforcement learning to provide a basis for evaluating the ideal behavior of the process states. Compared to conventional molding, the results indicate that the asymmetric process capability index, CPK, was increased by with velocity profile optimization and to 120% with both velocity profile and pressure profile optimization. Two general conclusions result. First, velocity and pressure profiling provide important degrees of freedom for optimizing process control and maximizing part quality. Second, estimators for unobservable process states, in this case birefringence and warpage, can be used to develop different machine profiles to selectively trade off multiple quality attributes according to user preferences.
Skip Nav Destination
Article navigation
August 2007
Technical Papers
Process-Driven Input Profiling for Plastics Processing
Shaoqiang Dong,
Shaoqiang Dong
Graduate Research Assistant
Department of Mechanical and Industrial Engineering,
University of Massachusetts
, Amherst, MA
Search for other works by this author on:
Chunsheng E,
Chunsheng E
Graduate Research Assistant
Department of Mechanical and Industrial Engineering,
University of Massachusetts
, Amherst, MA
Search for other works by this author on:
Bingfeng Fan,
Bingfeng Fan
Graduate Research Assistant
Department of Mechanical and Industrial Engineering,
University of Massachusetts
, Amherst, MA
Search for other works by this author on:
Kourosh Danai,
Kourosh Danai
Professor
Fellow ASME
Department of Mechanical and Industrial Engineering,
University of Massachusetts
, Amherst, MA
Search for other works by this author on:
David O. Kazmer
David O. Kazmer
Professor
Department of Plastics Engineering,
University of Massachusetts
, Lowell, MA
Search for other works by this author on:
Shaoqiang Dong
Graduate Research Assistant
Department of Mechanical and Industrial Engineering,
University of Massachusetts
, Amherst, MA
Chunsheng E
Graduate Research Assistant
Department of Mechanical and Industrial Engineering,
University of Massachusetts
, Amherst, MA
Bingfeng Fan
Graduate Research Assistant
Department of Mechanical and Industrial Engineering,
University of Massachusetts
, Amherst, MA
Kourosh Danai
Professor
Fellow ASME
Department of Mechanical and Industrial Engineering,
University of Massachusetts
, Amherst, MA
David O. Kazmer
Professor
Department of Plastics Engineering,
University of Massachusetts
, Lowell, MAJ. Manuf. Sci. Eng. Aug 2007, 129(4): 802-809 (8 pages)
Published Online: January 25, 2007
Article history
Received:
April 7, 2005
Revised:
January 25, 2007
Citation
Dong, S., E, C., Fan, B., Danai, K., and Kazmer, D. O. (January 25, 2007). "Process-Driven Input Profiling for Plastics Processing." ASME. J. Manuf. Sci. Eng. August 2007; 129(4): 802–809. https://doi.org/10.1115/1.2738094
Download citation file:
Get Email Alerts
Cited By
Related Articles
Assembly Molding of Tight Mechatronic System - A Model Approach
J. Manuf. Sci. Eng (October,2010)
Optimization of the Powder Injection Molding Process Parameters Using the Sequential Simplex Algorithm and Sensitivity Analysis
J. Manuf. Sci. Eng (February,2013)
In-Situ Shrinkage Sensor for Injection Molding
J. Manuf. Sci. Eng (December,2010)
Related Proceedings Papers
Related Chapters
Simulation and Optimization of Injection Process for LCD Cover
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Optimum Thin Walled Injection Molding Parameters Design, Based on Taguchi Technique for Mobile
International Conference on Computer and Computer Intelligence (ICCCI 2011)
Natural Gas Transmission
Pipeline Design & Construction: A Practical Approach, Third Edition