This paper presents a steady-state heat transfer model for a rotary kiln used for drying and preheating of wet solids with application to the non-reacting zone of a cement rotary kiln. A detailed parametric study indicates that the influence of the controlling parameters such as percent water content (with respect to dry solids), solids flow rate, gas flow rate, kiln inclination angle and the rotational speed of the kiln on the axial solids and gas temperature profiles and the total predicted kiln length is appreciable.
Issue Section:
Technical Briefs
1.
Ghoshdastidar, P. S., Rhodes, C. A., and Orloff, D. I., 1985, “Heat Transfer in a Rotary Kiln during Incineration of Solid Waste,” 23rd ASME National Heat Transfer Conference, Denver, Colorado, August 4–7, ASME Paper No. 85-HT-86.
2.
Gilbert
W.
1936
, “Heat Transmission in Rotary Kilns
,” Cement and Cement Manufacture
, Vol. 9
, pp. 115
–128
.3.
Heimlich
H.
Schu¨gerl
K.
1980
, “Rotary Kiln Reactors in Chemical Industry
,” Ger. Chem. Engg.
, Vol. 3
, pp. 194
–202
.4.
Holman, J. P., 1981, Heat Transfer, pp. 341–348, 5th International Student Edition, McGraw Hill.
5.
Hottel, H. C., 1954, “Heat Transmission,” Chap. 4, Radiant Heat Transmission, W. H. McAdams, ed., 3rd ed., McGraw-Hill, New York.
6.
Jacob, M., 1957, Heat Transfer, Vol. II, pp. 19–21, John Wiley & Sons, Inc., New York.
7.
Manitius
A.
Kureyuz
E.
Kawecki
W.
1974
, “Mathematical Model of the Aluminium Oxide Rotary Kiln
,” Ind. Eng. Chem. Process Design and Development
, Vol. 13
, No. 2
, pp. 132
–142
.8.
Manson, L., and Unger, S., 1979, “Hazardous Material Incineration Design Criteria,” EPA Report No. 600/2-79-198, October.
9.
Sass
A.
1967
, “Simulation of the Heat Transfer Phenomena in a Rotary Kiln
,” Ind. Eng. Chem. Process Design and Development
, Vol. 6
, No. 4
, pp. 532
–535
.10.
Suryanarayana
N. V.
Lyon
J. E.
Kim
N. K.
1986
, “Heat Shield for High Temperature Kiln
,” Ind. Eng. Chem. Process Design and Development
, Vol. 25
, pp. 843
–849
.11.
Weber, P., 1963, Heat Transfer in Rotary Kilns, Bauverlag Gmbh, Wiesbaden-Berlin.
This content is only available via PDF.
Copyright © 1996
by The American Society of Mechanical Engineers
You do not currently have access to this content.