A new nonintrusive and whole field method for the measurement of entropy generation in microscale thermal-fluid devices is presented. The rate of entropy generation is a measure of the thermodynamic losses or irreversibilities associated with viscous effects and heat transfer in thermal-fluid systems. This method provides the entropy generation distribution in the device, thus enabling the designers to find and modify the areas producing high energy losses characterized by large entropy production rates. The entropy generation map is obtained by postprocessing the velocity and temperature distribution data, measured by micro particle image velocimetry and laser induced fluorescence methods, respectively. The velocity and temperature measurements lead to the frictional and thermal terms of entropy generation. One main application of this method is optimizing the efficiency of microchannel heatsinks, used in cooling of electronic devices. The minimum amount of entropy generation determines the optimum design parameters of heatsinks, leading to highest heat removal rates and at the same time, the lowest pressure drop across the heatsink. To show the capability of this technique, the entropy generation field in the transition region between a wide and a wide rectangular microchannel is measured. This method is used to measure thermal and frictional entropy generation rates in three different flow area transition geometries. The results can be used to determine which geometry has the highest thermal and hydraulic efficiencies.
Skip Nav Destination
e-mail: msaffari@engmail.uwaterloo.ca
e-mail: rix@mhtlab.uwaterloo.ca
Article navigation
December 2010
This article was originally published in
Journal of Heat Transfer
Research Papers
Measurement of Entropy Generation in Microscale Thermal-Fluid Systems
Meghdad Saffaripour,
Meghdad Saffaripour
Research Assistant
Department of Mechanical and Mechatronics Engineering, Microelectronics Heat Transfer Laboratory,
e-mail: msaffari@engmail.uwaterloo.ca
University of Waterloo
, Waterloo, ON, N2L 3G1, Canada
Search for other works by this author on:
Richard Culham
Richard Culham
Professor
Department of Mechanical and Mechatronics Engineering, Microelectronics Heat Transfer Laboratory,
e-mail: rix@mhtlab.uwaterloo.ca
University of Waterloo
, Waterloo, ON, N2L 3G1, Canada
Search for other works by this author on:
Meghdad Saffaripour
Research Assistant
Department of Mechanical and Mechatronics Engineering, Microelectronics Heat Transfer Laboratory,
University of Waterloo
, Waterloo, ON, N2L 3G1, Canadae-mail: msaffari@engmail.uwaterloo.ca
Richard Culham
Professor
Department of Mechanical and Mechatronics Engineering, Microelectronics Heat Transfer Laboratory,
University of Waterloo
, Waterloo, ON, N2L 3G1, Canadae-mail: rix@mhtlab.uwaterloo.ca
J. Heat Transfer. Dec 2010, 132(12): 121401 (9 pages)
Published Online: September 17, 2010
Article history
Received:
January 1, 2009
Revised:
May 22, 2010
Online:
September 17, 2010
Published:
September 17, 2010
Citation
Saffaripour, M., and Culham, R. (September 17, 2010). "Measurement of Entropy Generation in Microscale Thermal-Fluid Systems." ASME. J. Heat Transfer. December 2010; 132(12): 121401. https://doi.org/10.1115/1.4002026
Download citation file:
Get Email Alerts
Cited By
Entropic Analysis of the Maximum Output Power of Thermoradiative Cells
J. Heat Mass Transfer
Molecular Dynamics Simulations in Nanoscale Heat Transfer: A Mini Review
J. Heat Mass Transfer
Related Articles
Thermodynamically Constrained Averaging Theory Approach for Heat Transport in Single-Fluid-Phase Porous Medium Systems
J. Heat Transfer (October,2009)
Thermal Deformation: From Thermodynamics to Heat Transfer
J. Heat Transfer (October,2001)
Entropy Generation Extrema and Their Relationship With Heat Exchanger Effectiveness—Number of Transfer Unit Behavior for Complex Flow Arrangements
J. Heat Transfer (December,2004)
High-Frequency Effects in the Aspirating Probe
J. Turbomach (October,2007)
Related Proceedings Papers
Related Chapters
Constrained Noninformative Priors with Uncertain Constraints: A Hierarchical Simulation Approach (PSAM-0437)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)
The Applications of the Cloud Theory in the Spatial DMKD
International Conference on Electronics, Information and Communication Engineering (EICE 2012)
Comparing Probabilistic Graphical Model Based and Gaussian Process Based Selections for Predicting the Temporal Observations
Intelligent Engineering Systems through Artificial Neural Networks, Volume 20