Volume 104 Issue 3 | J. Eng. Gas Turbines Power

Skip Nav Destination

Volume 104, Issue 3

July 1982

This article was originally published in

Journal of Engineering for Power

ISSN 0022-0825

Research Papers

A Study of the Modal Truncation Error in the Component Mode Analysis of a Dual-Rotor System

D. F. Li, E. J. Gunter

J. Eng. Power. July 1982, 104(3): 525–532. doi: https://doi.org/10.1115/1.3227311

Abstract

View articletitled, A Study of the Modal Truncation Error in the Component Mode Analysis of a Dual-Rotor System

Open the PDF for in another window

Topics: Errors , Rotors , Eigenvalues , Equations of motion , Gas turbines , Stability

Fractional-Frequency Rotor Motion Due to Nonsymmetric Clearance Effects

D. W. Childs

J. Eng. Power. July 1982, 104(3): 533–541. doi: https://doi.org/10.1115/1.3227312

Abstract

View articletitled, Fractional-Frequency Rotor Motion Due to Nonsymmetric Clearance Effects

Open the PDF for in another window

Topics: Clearances (Engineering) , Rotors , Stiffness , Excitation , Bearings , Damping , Whirls

Short Duration Measurements of Heat-Transfer Rate to a Gas Turbine Rotor Blade

H. Consigny, B. E. Richards

J. Eng. Power. July 1982, 104(3): 542–550. doi: https://doi.org/10.1115/1.3227313

Abstract

View articletitled, Short Duration Measurements of Heat-Transfer Rate to a Gas Turbine Rotor Blade

Open the PDF for in another window

Topics: Blades , Gas turbines , Heat transfer , Rotors , Boundary layers , Flow (Dynamics) , Mach number , Reynolds number , Turbulence , Cascades (Fluid dynamics)

Component Mode Synthesis of Large Rotor Systems

D. F. Li, E. J. Gunter

J. Eng. Power. July 1982, 104(3): 552–560. doi: https://doi.org/10.1115/1.3227316

Abstract

View articletitled, Component Mode Synthesis of Large Rotor Systems

Open the PDF for in another window

Topics: Rotors , Dampers , Dynamics (Mechanics) , Engines , Gas turbines , Oxygen , Simulation , Space vehicles , Transients (Dynamics) , Vibration

Turbulence Characteristics in the Annulus-Wall Boundary Layer and Wake Mixing Region of a Compressor Rotor Exit

R. Davino, B. Lakshminarayana

J. Eng. Power. July 1982, 104(3): 561–570. doi: https://doi.org/10.1115/1.3227317

Abstract

View articletitled, Turbulence Characteristics in the Annulus-Wall Boundary Layer and Wake Mixing Region of a Compressor Rotor Exit

Open the PDF for in another window

Topics: Annulus , Boundary layers , Compressors , Rotors , Turbulence , Wakes , Blades , Flow (Dynamics) , Geometry , Probes

Analysis and Asymptotic Solutions of Compressible Turbulent Corner Flow

A. G. Mikhail, K. N. Ghia

J. Eng. Power. July 1982, 104(3): 571–579. doi: https://doi.org/10.1115/1.3227318

Abstract

View articletitled, Analysis and Asymptotic Solutions of Compressible Turbulent Corner Flow

Open the PDF for in another window

Topics: Corners (Structural elements) , Flow (Dynamics) , Turbulence , Anisotropy , Stress , Algebra , Boundary layers , Boundary-value problems , Compressible flow , Heat transfer

Equivalent Performance Testing of Multisection Compressors

M. A. Strite, N. A. Samurin

J. Eng. Power. July 1982, 104(3): 580–585. doi: https://doi.org/10.1115/1.3227319

Abstract

View articletitled, Equivalent Performance Testing of Multisection Compressors

Open the PDF for in another window

Topics: Compressors , Testing performance , Testing , Resolution (Optics)

Engine Dynamic Analysis With General Nonlinear Finite-Element Codes, Part 1: Overall Approach and Development of Bearing Damper Element

M. L. Adams, J. Padovan, D. G. Fertis

J. Eng. Power. July 1982, 104(3): 586–593. doi: https://doi.org/10.1115/1.3227320

Abstract

View articletitled, Engine Dynamic Analysis With General Nonlinear Finite-Element Codes, Part 1: Overall Approach and Development of Bearing Damper Element

Open the PDF for in another window

Topics: Bearings , Dampers , Dynamic analysis , Engines , Finite element analysis , Blades , Computer software , Computers , NASA , Simulation

Ceramic to Metal Attachment Using Low Modulus BRUNSBOND^® Pad

R. P. Tolokan, J. C. Nablo, J. B. Brady

J. Eng. Power. July 1982, 104(3): 594–600. doi: https://doi.org/10.1115/1.3227321

Abstract

View articletitled, Ceramic to Metal Attachment Using Low Modulus BRUNSBOND<sup>®</sup> Pad

Open the PDF for in another window

Topics: Ceramics , Metals , Ceramic coatings , Fibers , High temperature , Combustion chambers , Cycles , Electrodes , Gas turbines , Internal combustion engines

Fabrication of Injection Molded Sintered Alpha SiC Turbine Components

R. S. Storm, R. W. Ohnsorg, F. J. Frechette

J. Eng. Power. July 1982, 104(3): 601–606. doi: https://doi.org/10.1115/1.3227322

Abstract

View articletitled, Fabrication of Injection Molded Sintered Alpha SiC Turbine Components

Open the PDF for in another window

Topics: Manufacturing , Turbine components , Injection molding , Turbine blades , Molding , Rotors , Silicon

Water-Cooled Gas Turbine Monometallic Nozzle Fabrication and Testing

P. W. Schilke, C. L. DeGeorge

J. Eng. Power. July 1982, 104(3): 607–616. doi: https://doi.org/10.1115/1.3227323

Abstract

View articletitled, Water-Cooled Gas Turbine Monometallic Nozzle Fabrication and Testing

Open the PDF for in another window

Topics: Gas turbines , Manufacturing , Nozzles , Testing , Water , Electrical discharge machining , Machining , Brazing , Design , Electrodes

The Effect of Bending-Torsion Coupling on Fan and Compressor Blade Flutter

O. O. Bendiksen, P. P. Friedmann

J. Eng. Power. July 1982, 104(3): 617–623. doi: https://doi.org/10.1115/1.3227324

Abstract

View articletitled, The Effect of Bending-Torsion Coupling on Fan and Compressor Blade Flutter

Open the PDF for in another window

Topics: Blades , Compressors , Flutter (Aerodynamics) , Torsion , Cascades (Fluid dynamics) , Damping , Design , Equations of motion , Flow (Dynamics) , Rotors

Nuclear Blast Response of Airbreathing Propulsion Systems: Laboratory Measurements With an Operational J-85-5 Turbojet Engine

M. G. Dunn, J. M. Rafferty

J. Eng. Power. July 1982, 104(3): 624–632. doi: https://doi.org/10.1115/1.3227325

Abstract

View articletitled, Nuclear Blast Response of Airbreathing Propulsion Systems: Laboratory Measurements With an Operational J-85-5 Turbojet Engine

Open the PDF for in another window

Topics: Engines , Propulsion systems , Turbojets , Compressors , Frequency response , Pressure , Pressure transducers , Transducers , Waves

The Influence of Blade Number Ratio and Blade Row Spacing on Axial-Flow Compressor Stator Blade Dynamic Load and Stage Sound Pressure Level

H. E. Gallus, H. Grollius, J. Lambertz

J. Eng. Power. July 1982, 104(3): 633–641. doi: https://doi.org/10.1115/1.3227326

Abstract

View articletitled, The Influence of Blade Number Ratio and Blade Row Spacing on Axial-Flow Compressor Stator Blade Dynamic Load and Stage Sound Pressure Level

Open the PDF for in another window

Topics: Axial flow , Blades , Compressors , Sound pressure , Stators , Stress , Rotors , Noise (Sound) , Pressure , Microphones

Application of Lifting Line Theory to Streamsurface Theory in Subsonic Flow

P. T. Chang

J. Eng. Power. July 1982, 104(3): 642–649. doi: https://doi.org/10.1115/1.3227327

Abstract

View articletitled, Application of Lifting Line Theory to Streamsurface Theory in Subsonic Flow

Open the PDF for in another window

Topics: Cascades (Fluid dynamics) , Design , Flow (Dynamics) , Pressure , Rotors , Subsonic flow , Vorticity

An Inverse Time Marching Method for the Definition of Cascade Geometry

G. Meauze´

J. Eng. Power. July 1982, 104(3): 650–656. doi: https://doi.org/10.1115/1.3227328

Abstract

View articletitled, An Inverse Time Marching Method for the Definition of Cascade Geometry

Open the PDF for in another window

Topics: Cascades (Fluid dynamics) , Geometry , Flow (Dynamics) , Suction , Compressors , Computational methods , Pressure , Shock waves , Turbines

A Method for the Calculation of the Wall Layers Inside the Passage of a Compressor Cascade With and Without Tip Clearance

A. Comte, G. Ohayon, K. D. Papailiou

J. Eng. Power. July 1982, 104(3): 657–667. doi: https://doi.org/10.1115/1.3227329

Abstract

View articletitled, A Method for the Calculation of the Wall Layers Inside the Passage of a Compressor Cascade With and Without Tip Clearance

Open the PDF for in another window

Topics: Cascades (Fluid dynamics) , Clearances (Engineering) , Compressors , Vorticity , Blades , Boundary layers , Flow (Dynamics) , Integral equations , Navier-Stokes equations , Shear (Mechanics)

Solution of Plane Cascade Flow Using Improved Surface Singularity Methods

E. R. McFarland

J. Eng. Power. July 1982, 104(3): 668–674. doi: https://doi.org/10.1115/1.3227330

Abstract

View articletitled, Solution of Plane Cascade Flow Using Improved Surface Singularity Methods

Open the PDF for in another window

Topics: Flow (Dynamics) , Blades , Cascades (Fluid dynamics) , Inviscid flow , Shapes , Turbomachinery

Supersonic Stall Flutter of High-Speed Fans

J. J. Adamczyk, W. Stevans, R. Jutras

J. Eng. Power. July 1982, 104(3): 675–682. doi: https://doi.org/10.1115/1.3227331

Abstract

View articletitled, Supersonic Stall Flutter of High-Speed Fans

Open the PDF for in another window

Topics: Fans , Flutter (Aerodynamics) , Rotors , Cascades (Fluid dynamics) , Blades , Actuators , Damping , Disks , Dynamic response , Geometry

The Influence of Unsteady Rotor Response on a Distorted Flow Field

R. E. Henderson, I. C. Shen

J. Eng. Power. July 1982, 104(3): 683–691. doi: https://doi.org/10.1115/1.3227332

Abstract

View articletitled, The Influence of Unsteady Rotor Response on a Distorted Flow Field

Open the PDF for in another window

Topics: Flow (Dynamics) , Rotors , Actuators , Disks , Wavelength , Axial flow , Blades , Inflow , Pressure , Shapes

Effect of Time-Dependent Flight Loads on Turbofan Engine Performance Deterioration

B. L. Lewis, A. Jay, E. G. Stakolich

J. Eng. Power. July 1982, 104(3): 692–697. doi: https://doi.org/10.1115/1.3227333

Abstract

View articletitled, Effect of Time-Dependent Flight Loads on Turbofan Engine Performance Deterioration

Open the PDF for in another window

Topics: Engines , Flight , Stress , Turbofans , Cycles , Aircraft , Jet propulsion , Power stations , Rotating blades , Rotors

Boundary Layer Development on Turbine Airfoil Suction Surfaces

O. P. Sharma, R. A. Wells, R. H. Schlinker, D. A. Bailey

J. Eng. Power. July 1982, 104(3): 698–706. doi: https://doi.org/10.1115/1.3227334

Abstract

View articletitled, Boundary Layer Development on Turbine Airfoil Suction Surfaces

Open the PDF for in another window

Topics: Airfoils , Boundary layers , Suction , Turbines , Design , Engines , NASA , Turbulence , Wind tunnels

Mechanical Design of a High-Efficiency 7.5-MW (10,000-hp) Gas Turbine

J. P. Van Buijtenen, W. M. Farrell

J. Eng. Power. July 1982, 104(3): 707–714. doi: https://doi.org/10.1115/1.3227335

Abstract

View articletitled, Mechanical Design of a High-Efficiency 7.5-MW (10,000-hp) Gas Turbine

Open the PDF for in another window

Topics: Design engineering , Gas turbines , Rotors , Bearings , Combustion , Combustion chambers , Compressors , Stators , Temperature , Thermal efficiency

Theoretical Study of Flow Instabilities and Inlet Distortions in Axial Compressors

P. Ferrand, J. Chauvin

J. Eng. Power. July 1982, 104(3): 715–721. doi: https://doi.org/10.1115/1.3227336

Abstract

View articletitled, Theoretical Study of Flow Instabilities and Inlet Distortions in Axial Compressors

Open the PDF for in another window

Topics: Compressors , Flow instability , Evaluation methods , Flow (Dynamics) , Fourier series , Laplace transforms , Servomechanisms , Space , Stability , Surges

Discussions

Discussion: “Short Duration Measurements of Heat-Transfer Rate to a Gas Turbine Rotor Blade” (Consigny, H., and Richards, B. E., 1982, ASME J. Eng. Power, 104, pp. 542–550)

Ronald M. C. So, Russell E. Sheer

J. Eng. Power. July 1982, 104(3): 550–551. doi: https://doi.org/10.1115/1.3227314

View articletitled, Discussion: “Short Duration Measurements of Heat-Transfer Rate to a Gas Turbine Rotor Blade” (Consigny, H., and Richards, B. E., 1982, ASME J. Eng. Power, 104, pp. 542–550)

Open the PDF for in another window

Topics: Blades , Gas turbines , Heat transfer , Rotors

Closure to “Discussion of ‘Short Duration Measurements of Heat-Transfer Rate to a Gas Turbine Rotor Blade’” (1982, ASME J. Eng. Power, 104, pp. 550–551)

H. Consigny, B. E. Richards

J. Eng. Power. July 1982, 104(3): 551. doi: https://doi.org/10.1115/1.3227315

View articletitled, Closure to “Discussion of ‘Short Duration Measurements of Heat-Transfer Rate to a Gas Turbine Rotor Blade’” (1982, ASME J. Eng. Power, 104, pp. 550–551)

Open the PDF for in another window

Topics: Gas turbines , Heat transfer , Rotors

Errata

Erratum: “Rotor Wake Mixing Effects Downstream of a Compressor Rotor” (Journal of Engineering for Power, 1982, 104, pp. 202–210)

A. Ravindranath, B. Takshminarayana

J. Eng. Power. July 1982, 104(3): 722. doi: https://doi.org/10.1115/1.3227337

View articletitled, Erratum: “Rotor Wake Mixing Effects Downstream of a Compressor Rotor” (Journal of Engineering for Power, 1982, 104, pp. 202–210)

Open the PDF for in another window

Topics: Compressors , Rotors , Wakes

Research Papers

A Study of the Modal Truncation Error in the Component Mode Analysis of a Dual-Rotor System

Fractional-Frequency Rotor Motion Due to Nonsymmetric Clearance Effects

Short Duration Measurements of Heat-Transfer Rate to a Gas Turbine Rotor Blade

Component Mode Synthesis of Large Rotor Systems

Turbulence Characteristics in the Annulus-Wall Boundary Layer and Wake Mixing Region of a Compressor Rotor Exit

Analysis and Asymptotic Solutions of Compressible Turbulent Corner Flow

Equivalent Performance Testing of Multisection Compressors

Engine Dynamic Analysis With General Nonlinear Finite-Element Codes, Part 1: Overall Approach and Development of Bearing Damper Element

Ceramic to Metal Attachment Using Low Modulus BRUNSBOND^® Pad

Fabrication of Injection Molded Sintered Alpha SiC Turbine Components

Water-Cooled Gas Turbine Monometallic Nozzle Fabrication and Testing

The Effect of Bending-Torsion Coupling on Fan and Compressor Blade Flutter

Nuclear Blast Response of Airbreathing Propulsion Systems: Laboratory Measurements With an Operational J-85-5 Turbojet Engine

The Influence of Blade Number Ratio and Blade Row Spacing on Axial-Flow Compressor Stator Blade Dynamic Load and Stage Sound Pressure Level

Application of Lifting Line Theory to Streamsurface Theory in Subsonic Flow

An Inverse Time Marching Method for the Definition of Cascade Geometry

A Method for the Calculation of the Wall Layers Inside the Passage of a Compressor Cascade With and Without Tip Clearance

Solution of Plane Cascade Flow Using Improved Surface Singularity Methods

Supersonic Stall Flutter of High-Speed Fans

The Influence of Unsteady Rotor Response on a Distorted Flow Field

Effect of Time-Dependent Flight Loads on Turbofan Engine Performance Deterioration

Boundary Layer Development on Turbine Airfoil Suction Surfaces

Mechanical Design of a High-Efficiency 7.5-MW (10,000-hp) Gas Turbine

Theoretical Study of Flow Instabilities and Inlet Distortions in Axial Compressors

Discussions

Discussion: “Short Duration Measurements of Heat-Transfer Rate to a Gas Turbine Rotor Blade” (Consigny, H., and Richards, B. E., 1982, ASME J. Eng. Power, 104, pp. 542–550)

Closure to “Discussion of ‘Short Duration Measurements of Heat-Transfer Rate to a Gas Turbine Rotor Blade’” (1982, ASME J. Eng. Power, 104, pp. 550–551)

Errata

Erratum: “Rotor Wake Mixing Effects Downstream of a Compressor Rotor” (Journal of Engineering for Power, 1982, 104, pp. 202–210)

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Discussions

Errata

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only