Abstract

This paper presents experimental and numerical investigation of mistuned forced responses of an integrally bladed disk with full set of underplatform dampers (UPDs). This research aims at providing: 1. An experimental benchmark for nonlinear dynamics of a mistuned bladed disks with UPDs. 2. A numerical model that can account for features of a mistuned forced response level. Accordingly, a detailed experimental campaign is conducted on a static test rig called Octopus. This rig is specifically designed to investigate the dynamics of a full-scale integrally bladed disk (blisk) with UPDs in a noncontact manner so that the dynamic response of the system is not modified. The effect of mistuning on experimental forced response levels is assessed and a linearized model is proposed to predict the modulation of frequency response functions (FRFs) due to the frequency splitting. In the development of the model, the mistuning pattern identified from the linear blisk without UPDs is used and it is assumed that adding the dampers does not change the structural mistuning of the blisk. In this study, the fundamental mistuning model identification (FMM ID) was employed to identify the mistuning pattern of the blisk. It is shown that the proposed model successfully predicts the modulation of linear mistuned FRFs. The linearized model is also able to predict the modulation of nonlinear mistuned FRFs in stick condition (when nonlinear friction damping is negligible) with a good accuracy validating this assumption that adding the dampers does not change the mistuning pattern.

References

1.
Srinivasan
,
A. V.
,
1997
, “
Flutter and Resonant Vibration Characteristics of Engine Blades
,”
ASME J. Eng. Gas Turbines Power
,
119
(
4
), pp.
742
775
.10.1115/1.2817053
2.
Castanier
,
M.
, and
Pierre
,
C.
,
2006
, “
Modeling and Analysis of Mistuned Bladed Disk Vibration: Current Status and Emerging Directions
,”
J. Propul. Power
,
22
(
2
), pp.
384
396
.10.2514/1.16345
3.
Mehrdad Pourkiaee
,
S.
, and
Zucca
,
S.
,
2019
, “
A Reduced Order Model for Nonlinear Dynamics of Mistuned Bladed Disks With Shroud Friction Contacts
,”
ASME J. Eng. Gas Turbines Power
,
141
(
1
), p.
011031
.10.1115/1.4041653
4.
Pourkiaee
,
S. M.
, and
Zucca
,
S.
,
2020
, “
Mixed-Boundary Component Mode Substitution for Nonlinear Dynamics of Mistuned Shrouded Bladed Disks
,”
AIAA J.
,
58
(
1
), pp.
1
13
.10.2514/1.J058561
5.
Zucca
,
S.
,
Firrone
,
C. M.
, and
Gola
,
M. M.
,
2012
, “
Numerical Assessment of Friction Damping at Turbine Blade Root Joints by Simultaneous Calculation of the Static and Dynamic Contact Loads
,”
Nonlinear Dyn.
,
67
(
3
), pp.
1943
1955
.10.1007/s11071-011-0119-y
6.
Alinejad
,
F.
,
Botto
,
D.
,
Gola
,
M.
, and
Bessone
,
A.
,
2018
, “
Reduction of the Design Space to Optimize Blade Fir-Tree Attachments
,”
ASME
Paper No. GT2018-75781.10.1115/GT2018-75781
7.
Gastaldi
,
C.
,
Fantetti
,
A.
, and
Berruti
,
T.
,
2017
, “
Forced Response Prediction of Turbine Blades With Flexible Dampers: The Impact of Engineering Modelling Choices
,”
Appl. Sci.
,
8
(
1
), p.
34
.10.3390/app8010034
8.
Gastaldi
,
C.
, and
Berruti
,
T.
,
2018
, “
Experimental Verification of the Dynamic Model of Turbine Blades Coupled by a Sealing Strip
,”
Appl. Sci.
,
8
(
11
), p.
2174
.10.3390/app8112174
9.
Gastaldi
,
C.
,
Berruti
,
T. M.
, and
Gola
,
M. M.
,
2020
, “
A Novel Test Rig for Friction Parameters Measurement on Underplatform Dampers
,”
Int. J. Solids Struct.
,
185-186
, pp.
170
181
.10.1016/j.ijsolstr.2019.08.030
10.
Gastaldi
,
C.
, and
Gola
,
M. M.
,
2017
, “
Pre-Optimization of Asymmetrical Underplatform Dampers
,”
ASME J. Eng. Gas Turbines Power
,
139
(
1
), p. 012504.10.1115/1.4034191
11.
Firrone
,
C. M.
,
2009
, “
Measurement of the Kinematics of Two Underplatform Dampers With Different Geometry and Comparison With Numerical Simulation
,”
J. Sound Vib.
,
323
(
1–2
), pp.
313
333
.10.1016/j.jsv.2008.12.019
12.
Botto
,
D.
,
Gastadi
,
C.
,
Gola
,
M. M.
, and
Umer
,
M.
,
2018
, “
An Experimental Investigation of the Dynamics of a Blade With Two Under-Platform Dampers
,”
ASME J. Eng. Gas Turbines Power
,
140
(
3
), p.
032504
.10.1115/1.4037865
13.
Bessone
,
A.
,
Toso
,
F.
, and
Berruti
,
T.
,
2015
, “
Investigation on the Dynamic Response of Blades With Asymmetric Under Platform Dampers
,”
ASME
Paper No. GT2015-42597.10.1115/GT2015-42597
14.
Pesaresi
,
L.
,
Salles
,
L.
,
Jones
,
A.
,
Green
,
J. S.
, and
Schwingshackl
,
C. W.
,
2017
, “
Modelling the Nonlinear Behaviour of an Underplatform Damper Test Rig for Turbine Applications
,”
Mech. Syst. Signal Process.
,
85
, pp.
662
679
.10.1016/j.ymssp.2016.09.007
15.
Zucca
,
S.
,
Di Maio
,
D.
, and
Ewins
,
D. J.
,
2012
, “
Measuring the Performance of Underplatform Dampers for Turbine Blades by Rotating Laser Doppler Vibrometer
,”
Mech. Syst. Signal Process.
,
32
, pp.
269
281
.10.1016/j.ymssp.2012.05.011
16.
Gastaldi
,
C.
,
Grossi
,
E.
, and
Berruti
,
T. M.
,
2017
, “
On the Choice of Contact Parameters for the Forced Response Calculation of a Bladed Disk With Underplatform Dampers
,”
J. Global Power Propul. Soc.
,
1
, p.
5D19RH
.10.22261/5D19RH
17.
Sever
,
I. A.
,
Petrov
,
E. P.
, and
Ewins
,
D. J.
,
2008
, “
Experimental and Numerical Investigation of Rotating Bladed Disk Forced Response Using Underplatform Friction Dampers
,”
ASME J. Eng. Gas Turbines Power
,
130
(
4
), p.
042503
.10.1115/1.2903845
18.
Petrov
,
E.
,
Di Mare
,
L.
,
Hennings
,
H.
, and
Elliott
,
R.
,
2010
, “
Forced Response of Mistuned Bladed Disks in Gas Flow: A Comparative Study of Predictions and Full-Scale Experimental Results
,”
ASME J. Eng. Gas Turbines Power
,
132
(
5
), p.
052504
.10.1115/1.3205031
19.
Kruse
,
M. J.
, and
Pierre
,
C.
,
1997
, “
An Experimental Investigation of Vibration Localization in Bladed Disks, Part I: Free Response
,”
ASME
Paper No. 97-GT-501.10.1115/97-GT-501
20.
Beirow
,
B.
,
Figaschewsky
,
F.
,
Kühhorn
,
A.
, and
Bornhorn
,
A.
,
2018
, “
Modal Analyses of an Axial Turbine Blisk With Intentional Mistuning
,”
ASME J. Eng. Gas Turbines Power
,
140
(
1
), p.
012503
.10.1115/1.4037588
21.
Strehlau
,
U.
, and
Kuhhorn
,
A.
,
2010
, “
Experimental and Numerical Investigations of HPC Blisks With a Focus on Travelling Waves
,”
ASME
Paper No. GT2010-22463.10.1115/GT2010-22463
22.
Jones
,
K. W.
, and
Cross
,
C. J.
,
2003
, “
Travelling Wave Excitation System for Bladed Disks
,”
J. Propul. Power
,
19
(
1
), pp.
135
141
.10.2514/2.6089
23.
Judge
,
J.
,
Ceccio
,
S. L.
, and
Pierre
,
C.
,
2003
, “
Traveling-Wave Excitation and Optical Measurement Techniques for Non-Contact Investigation of Bladed Disk Dynamics
,”
Shock Vibration Digest
,
35
(
3
), pp.
183
910
.10.1177/0583102403035003002
24.
Firrone
,
C. M.
, and
Berruti
,
T.
,
2012
, “
Noncontact Measurement System With Electromagnets for Vibration Tests on Bladed Disks
,”
Applied Measurement Systems
,
M. Z.
Haq
, ed.,
InTech
,
Rijeka, Croatia
, pp.
77
108
.
25.
Berruti
,
T.
,
2010
, “
A Test Rig for the Investigation of the Dynamic Response of a Bladed Disk With Underplatform Dampers
,”
Mech. Res. Commun.
,
37
(
6
), pp.
581
583
.10.1016/j.mechrescom.2010.07.008
26.
Firrone
,
C. M.
, and
Berruti
,
T.
,
2012
, “
An Electromagnetic System for the Non-Contact Excitation of Bladed Disks
,”
Exp. Mechanics
,
52
(
5
), pp.
447
459
.10.1007/s11340-011-9504-1
27.
Firrone
,
C. M.
,
Berruti
,
T. M.
, and
Gola
,
M. M.
,
2013
, “
On Force Control of an Engine Order–Type Excitation Applied to a Bladed Disk With Underplatform Dampers
,”
ASME J. Vib. Acoust.
,
135
(
4
), p.
041103
.10.1115/1.4023899
28.
Berruti
,
T.
,
Firrone
,
C. M.
, and
Gola
,
M. M.
,
2011
, “
A Test Rig for Noncontact Traveling Wave Excitation of a Bladed Disk With Underplatform Dampers
,”
ASME J. Eng. Gas Turbines Power
,
133
(
3
), p.
032502
.10.1115/1.4002100
29.
Ewins
,
D. J.
,
1984
,
Modal Testing: Theory and Practice
, vol.
15
,
Research Studies Press
,
Letchworth, UK
.
30.
Battiato
,
G.
,
Firrone
,
C. M.
, and
Berruti
,
T. M.
,
2017
, “
Forced Response of Rotating Bladed Disks: Blade Tip-Timing Measurements
,”
Mech. Syst. Signal Process.
,
85
, pp.
912
926
.10.1016/j.ymssp.2016.09.019
31.
Feiner
,
D. M.
, and
Griffin
,
J. H.
,
2004
, “
Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model—Part I: Theory
,”
ASME J. Turbomach.
,
126
(
1
), pp.
150
158
.10.1115/1.1643913
32.
Feiner
,
D. M.
, and
Griffin
,
J. H.
,
2004
, “
Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model—Part II: Application
,”
ASME J. Turbomach.
,
126
(
1
), pp.
159
165
.10.1115/1.1643914
33.
Gillaugh
,
D. L.
,
Kaszynski
,
A. A.
,
Brown
,
J. M.
,
Beck
,
J. A.
, and
Slater
,
J. C.
,
2019
, “
Mistuning Evaluation Comparison Via as-Manufactured Models, Traveling Wave Excitation, and Compressor Rigs
,”
ASME J. Eng. Gas Turbines Power
,
141
(
6
), p.
061006
.10.1115/1.4042079
34.
Gillaugh
,
D. L.
,
Kaszynski
,
A. A.
,
Brown
,
J. M.
,
Beck
,
J. A.
, and
Slater
,
J. C.
,
2019
, “
Strain Gage Ramifications on Mistuning in as-Manufactured Models and Experimental Testing
,”
ASME
Paper No. GT2019-91484.10.1115/GT2019-91484
You do not currently have access to this content.