Reheat combustion has been proven now in over to be a robust and highly flexible gas turbine concept for power generation. This paper covers three key topics to explain the intrinsic advantage of reheat combustion to achieve ultralow emission levels. First, the fundamental kinetic and thermodynamic emission advantage of reheat combustion is discussed, analyzing in detail the emission levels of the first and second combustor stages, optimal firing temperatures for minimal emission levels, as well as benchmarking against single-stage combustion concepts. Second, the generic operational and fuel flexibility of the reheat system is emphasized, which is based on the presence of two fundamentally different flame stabilization mechanisms, namely, flame propagation in the first combustor stage and autoignition in the second combustor stage. This is shown using simple reasoning on generic kinetic models. Finally, the present fleet status is reported by highlighting the latest combustor hardware upgrade and its emission performance.
Skip Nav Destination
Article navigation
March 2009
Research Papers
The Reheat Concept: The Proven Pathway to Ultralow Emissions and High Efficiency and Flexibility
Jaan Hellat,
Jaan Hellat
Alstom
, Brown-Boveri-Strasse 7, CH-5400 Baden, Switzerland
Search for other works by this author on:
Peter Flohr
Peter Flohr
Alstom
, Brown-Boveri-Strasse 7, CH-5400 Baden, Switzerland
Search for other works by this author on:
Felix Güthe
Jaan Hellat
Alstom
, Brown-Boveri-Strasse 7, CH-5400 Baden, Switzerland
Peter Flohr
Alstom
, Brown-Boveri-Strasse 7, CH-5400 Baden, SwitzerlandJ. Eng. Gas Turbines Power. Mar 2009, 131(2): 021503 (7 pages)
Published Online: December 24, 2008
Article history
Received:
May 30, 2007
Revised:
October 8, 2007
Published:
December 24, 2008
Citation
Güthe, F., Hellat, J., and Flohr, P. (December 24, 2008). "The Reheat Concept: The Proven Pathway to Ultralow Emissions and High Efficiency and Flexibility." ASME. J. Eng. Gas Turbines Power. March 2009; 131(2): 021503. https://doi.org/10.1115/1.2836613
Download citation file:
Get Email Alerts
Image-based flashback detection in a hydrogen-fired gas turbine using a convolutional autoencoder
J. Eng. Gas Turbines Power
Fuel Thermal Management and Injector Part Design for LPBF Manufacturing
J. Eng. Gas Turbines Power
An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen
J. Eng. Gas Turbines Power
Related Articles
Autoignition of Hydrogen and Air Inside a Continuous Flow Reactor With Application to Lean Premixed Combustion
J. Eng. Gas Turbines Power (September,2008)
Emission Characteristics of a Premixed Cyclic-Periodical-Mixing Combustor Operated With Hydrogen-Natural Gas Fuel Mixtures
J. Eng. Gas Turbines Power (February,2010)
Formaldehyde Formation in Large Bore Engines Part 2: Factors Affecting Measured CH 2 O
J. Eng. Gas Turbines Power (October,2000)
Performance of a Reduced NO x Diffusion Flame Combustor for the MS5002 Gas Turbine
J. Eng. Gas Turbines Power (April,2000)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Lay-Up and Start-Up Practices
Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration
The Identification of the Flame Combustion Stability by Combining Principal Component Analysis and BP Neural Network Techniques
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)