An electric utility grid connected test facility has been established at Silicon Valley Power (SVP) in Santa Clara, California to validate the reliability, availability, maintainability, and durability (RAMD) of a commercial-ready catalytic combustor system (XONON). Installed in the Silicon Valley Test Facility (SVTF) is a 1.5MW Kawasaki MIA-13A gas turbine fitted with a catalytic combustor. The gas turbine package is controlled by a Woodward MicroNet control system. The combustor utilizes a two stage lean premix preburner system to obtain the required catalyst inlet temperatures and low NOx over the operating load range. The fuel-air mixer incorporates counter rotating swirlers to mix the catalyst fuel and air to achieve the desired uniformity. The patented catalyst design is composed of specially coated metal foils. Overall engine performance was measured and the emissions were continuously monitored. As of Dec. 1999, emissions of NOx<2.5 ppmv and CO and UHC<6 ppmv have been maintained at 100 percent load for over 3700 hours of operation on the utility grid. The turbine continues to operated 24 hours a day, 7 days per week with commercial levels of unit availability.

Issue Section:
Gas Turbines: Combustion and Fuels
Keywords:
gas turbines, combustion, air pollution control, fuel, catalysts, emission
Topics:
Catalysts, Combustion chambers, Design, Emissions, Fuels, Stress, Turbines, Engines, Gas turbines, Temperature, Control systems, Generators, Test facilities, Combustion systems, Nitrogen oxides
1.
Kajita, S., Tanaka, Y., and Kitajima, J., 1990, “Evaluation of a Catalytic Combustor in a Gas Turbine-Generator Unit,” ASME Paper No. 90-GT-89.
2.
Kitajima, J., and Kajita, S., 1989, “Catalytic Combustor for Small Gas Turbines: Combustor Development,” ASME Paper No. 89-GT-265.
3.
Hoshino, A., Kajita, S., Hagiwara, Y., Fujimoto, K., and Kitajima, J., 1987, “Preliminary Tests of Catalytic Combustion in a Small Gas Turbine,” ASME Paper No. 87-GT-100.
4.
Sadamori, H., Tanioka, T., and Matsuhisa, T., 1994, “Development of a High Temperature Combustion System and Prototype Catalytic Combustor Turbine Test Results,” Proceedings of the International Workshop on Catalytic Combustion, H. Arai, ed., Tokyo, Japan, Apr. 18–20, Catalysis Society of Japan, Tokyo, p. 158.
5.
Sadamori, H., 1994, reported in the presentation at the International Workshop on Catalytic Combustion, Tokyo, Japan, Apr. 18–20.
6.
O’Brian, 1998, “Development of a 50 KW, Low Emissions Turbogenerator for Hybrid Electric Vehicles,” ASME Paper No. 98-GT-400.
7.
Dalla Betta, R. A., Nickolas, S. G., Weakley, C. K., Lundberg, K., Caron, T. J., Chamberlain, J., and Greeb, K., 1999, “Field Test of a 1.5 MW Industrial Gas Turbine with a Low Emissions Catalytic Combustion System,” ASME Paper No. 99-GT-295.
8.
Dalla Betta, R. A., Schlatter, J. C., Nickolas, S. G., Yee, D. K., and Shoji, T., 1994, “New Catalytic Combustion Technology for Very Low Emissions Gas Turbines,” ASME Paper No. 94-GT-260.
9.
Magruder, T. D., McDonald, J. P., and Mellor, A. M., 1995, “Engineering Analysis for Lean Premixed Combustor Design,” AIAA Paper No. 95-3136.
10.
Lefebvre, A. H., 1983, Gas Turbine Combustion, Taylor & Francis, London.
11.
Schlatter, J. C., Dalla Betta, R. A., Nickolas, S. G., Cutrone, M. B., Beebe, K. W., and Tsuchiya, T., 1997, “Single-Digit Emissions in a Full Scale Catalytic Combustor,” ASME Paper No. 97-GT-57.
12.
Dalla Betta, R. A., Schlatter, J. C., Nickolas, S. G., Cutrone, M. B., Beebe, K. W., Furuse, Y., and Tsuchiya, T., 1996, “Development of a Catalytic Combustor for a Heavy-Duty Utility Gas Turbine,” ASME Paper No. 96-GT-485.
13.
Star-CD version 3.050A, 1998, ADAPCO, Ltd., Melville, NY.
14.
ANSYS rev. 5.5, 1998, Swanson Analysis Systems, Houston, PA.
Copyright © 2001
 by ASME
You do not currently have access to this content.