Skip Nav Destination
Issues
January 1958
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
The Determination of the Equation of State From Wave-Front Observations
Trans. ASME. January 1958, 80(1): 1–8.
doi: https://doi.org/10.1115/1.4012232
Topics:
Equations of state
,
Waves
,
Differential equations
,
Shock waves
,
Compression
,
Density
,
Pressure
,
Specific heat
,
Wave propagation
The Viscosity of Five Gases: A Re-Evaluation
Trans. ASME. January 1958, 80(1): 11–17.
doi: https://doi.org/10.1115/1.4012237
Topics:
Gases
,
Viscosity
,
Nitrogen
,
Helium
,
Hydrogen
,
Pressure
,
Disks
,
Oscillations
,
Uncertainty
Convection Heat Transfer and Pressure Drop of Air Flowing Across In-Line Tube Banks: Part I—Apparatus, Procedures, and Special Effects
Trans. ASME. January 1958, 80(1): 18–24.
doi: https://doi.org/10.1115/1.4012240
Topics:
Computational methods
,
Convection
,
Flow (Dynamics)
,
Heat transfer
,
Noise (Sound)
,
Pressure drop
,
Temperature
,
Turbulence
Convection Heat Transfer and Pressure Drop of Air Flowing Across In-Line Tube Banks: II—Correlation of Data for Ten-Row-Deep Tube Banks
Trans. ASME. January 1958, 80(1): 25–34.
doi: https://doi.org/10.1115/1.4012241
Topics:
Convection
,
Pressure drop
,
Heat transfer
,
Reynolds number
,
Geometry
Shell-Side Characteristics of Shell-and-Tube Heat Exchangers: A Simplified Rating System for Commercial Heat Exchangers
Trans. ASME. January 1958, 80(1): 36–49.
doi: https://doi.org/10.1115/1.4012245
Topics:
Heat exchangers
,
Shells
,
Design
,
Heat transfer
,
Flow (Dynamics)
,
Approximation
,
Fluid dynamics
,
Fluids
,
Friction
,
Leakage
Heat Transfer and Fluid Friction During Flow Across Banks of Tubes—VI: The Effect of Internal Leakages Within Segmentally Baffled Exchangers
Trans. ASME. January 1958, 80(1): 53–60.
doi: https://doi.org/10.1115/1.4012249
Topics:
Flow (Dynamics)
,
Heat transfer
,
Leakage
,
Viscosity
,
Pressure drop
,
Heat exchangers
,
Pressure
,
Turbulence
Sublimation From Disks to Air Streams Flowing Normal to Their Surfaces
Trans. ASME. January 1958, 80(1): 61–67.
doi: https://doi.org/10.1115/1.4012250
Topics:
Disks
,
Heat transfer
,
Water
,
Calibration
,
Convection
,
Errors
,
Evaporation
,
Heat
,
Instrumentation
,
Jets
Heat Transfer From a Rotating Cylinder With and Without Crossflow
Trans. ASME. January 1958, 80(1): 70–77.
doi: https://doi.org/10.1115/1.4012253
Topics:
Cylinders
,
Heat transfer
,
Boundary layers
,
Flow (Dynamics)
,
Convection
,
Rotation
,
Boundary layer turbulence
,
Heat
,
Momentum
,
Natural convection
Heat-Transfer Characteristics of the Rotational and Axial Flow Between Concentric Cylinders
Trans. ASME. January 1958, 80(1): 79–89.
doi: https://doi.org/10.1115/1.4012256
Topics:
Axial flow
,
Cylinders
,
Heat transfer
,
Turbulence
,
Flow (Dynamics)
,
Rotational flow
,
Vortices
Accelerated Field Tests of Cavitation Intensity
Trans. ASME. January 1958, 80(1): 91–96.
doi: https://doi.org/10.1115/1.4012259
Topics:
Cavitation
,
Hydraulic equipment
,
Hydraulic turbines
,
Plates (structures)
Progress Report on Standardization of the Vibratory-Cavitation Test
Trans. ASME. January 1958, 80(1): 103–106.
doi: https://doi.org/10.1115/1.4012267
Topics:
Cavitation
,
Damage
,
Materials testing
Equivalent Performance Parameters for Turboblowers and Compressors
Trans. ASME. January 1958, 80(1): 108–113.
doi: https://doi.org/10.1115/1.4012271
Topics:
Compressors
,
Design
,
Errors
,
Fluids
,
Testing
Experimental and Theoretical Pressures and Velocity Fields for Various Lead Extrusions
Trans. ASME. January 1958, 80(1): 117–122.
doi: https://doi.org/10.1115/1.4012274
Cold Extrusion of Unalloyed Titanium
Trans. ASME. January 1958, 80(1): 124–131.
doi: https://doi.org/10.1115/1.4012278
Topics:
Extruding
,
Titanium
,
Coating processes
,
Coatings
,
Ductility
,
Finishes
,
Galling
,
Graphite
,
Lubricants
,
Molybdenum
An Experimental Study on Chatter Vibrations in Grinding Operations
Trans. ASME. January 1958, 80(1): 133–140.
doi: https://doi.org/10.1115/1.4012283
Topics:
Chatter
,
Grinding
,
Vibration
,
Bearings
,
Belts
,
Wheels
,
Ball bearings
,
Clearances (Engineering)
,
Deflection
,
Grinding equipment
On the Basic Mechanics of the Grinding Process
Trans. ASME. January 1958, 80(1): 141–146.
doi: https://doi.org/10.1115/1.4012287
Force Components, Chip Geometry, and Specific Cutting Energy in Orthogonal and Oblique Machining of SAE 1015 Steel
Trans. ASME. January 1958, 80(1): 149–157.
doi: https://doi.org/10.1115/1.4012292
Topics:
Cutting
,
Geometry
,
Machining
,
Steel
,
Dynamometers
,
Strain gages
,
Tubing
Shear-Strain Rate in Metal Cutting and Its Effects on Shear-Flow Stress
Trans. ASME. January 1958, 80(1): 158–167.
doi: https://doi.org/10.1115/1.4012293
Topics:
Metal cutting
,
Shear (Mechanics)
,
Shear flow
,
Stress
,
Cutting
,
Machining
,
Steel
,
Tubing
A Method for Calculating Vibration Frequency and Stress of a Banded Group of Turbine Buckets
Trans. ASME. January 1958, 80(1): 169–179.
doi: https://doi.org/10.1115/1.4012296
Topics:
Oscillating frequencies
,
Stress
,
Turbines
,
Damping
,
Vibration
,
Cantilevers
,
Computation
,
Euler-Bernoulli beam theory
,
Joining
,
Machinery
High-Frequency Vibration of Steam-Turbine Buckets
Trans. ASME. January 1958, 80(1): 181–189.
doi: https://doi.org/10.1115/1.4012300
Experimental Determination of Gear Tooth Stresses in Large Marine Gears
Trans. ASME. January 1958, 80(1): 195–200.
doi: https://doi.org/10.1115/1.4012304
Topics:
Gear teeth
,
Gears
,
Stress
Calculation of Theoretical Flame Temperatures in Furnaces
Trans. ASME. January 1958, 80(1): 202–215.
doi: https://doi.org/10.1115/1.4012310
Topics:
Flames
,
Furnaces
,
Temperature
,
Enthalpy
,
Combustion
,
Carbon dioxide
,
Coal
,
Heat
,
Atmospheric pressure
,
Coke
In-Service Washing of Ljungstrom Air Preheaters on Pulverized Coal-Fired Steam Generators
Trans. ASME. January 1958, 80(1): 217–222.
doi: https://doi.org/10.1115/1.4012313
Topics:
Boilers
,
Coal
,
Failure
,
Fly ash
,
Power stations
The Formation of Sulphuric Acid in Boiler Flue Gases
Trans. ASME. January 1958, 80(1): 225–232.
doi: https://doi.org/10.1115/1.4012318
Topics:
Boilers
,
Flue gases
,
Heating
,
Corrosion
,
Gases
,
Surface finishing
The Automatic Calculation of Forces and Deflections in Piping Systems
Trans. ASME. January 1958, 80(1): 235–244.
doi: https://doi.org/10.1115/1.4012323
Topics:
Deflection
,
Piping systems
The Application of Gas/Liquid Cyclones in Oil Refining
Trans. ASME. January 1958, 80(1): 245–249.
doi: https://doi.org/10.1115/1.4012324
Topics:
Oil refining
,
Separation (Technology)
,
Two-phase flow
,
Vapors
Concurrent Flow of Air, Gas-Oil, and Water in a Horizontal Pipe
Trans. ASME. January 1958, 80(1): 252–255.
doi: https://doi.org/10.1115/1.4012330
Topics:
Flow (Dynamics)
,
Pipes
,
Water
,
Pipelines
,
Condensed matter
,
Crude oil
,
Design
,
Errors
,
Fluid dynamics
,
Methane hydrate
Discussions and Closures
Discussion: “The Determination of the Equation of State From Wave-Front Observations” (Lype, E. F., 1958, Trans. ASME, 80, pp. 1–8)
Trans. ASME. January 1958, 80(1): 8–9.
doi: https://doi.org/10.1115/1.4012233
Topics:
Equations of state
,
Waves
Discussion: “The Determination of the Equation of State From Wave-Front Observations” (Lype, E. F., 1958, Trans. ASME, 80, pp. 1–8)
Trans. ASME. January 1958, 80(1): 9.
doi: https://doi.org/10.1115/1.4012234
Topics:
Equations of state
,
Waves
Discussion: “The Determination of the Equation of State From Wave-Front Observations” (Lype, E. F., 1958, Trans. ASME, 80, pp. 1–8)
Trans. ASME. January 1958, 80(1): 9–10.
doi: https://doi.org/10.1115/1.4012235
Topics:
Equations of state
,
Waves
Closure to “Discussions of ‘The Determination of the Equation of State From Wave-Front Observations’” (1958, Trans. ASME, 80, pp. 8–10)
Trans. ASME. January 1958, 80(1): 10.
doi: https://doi.org/10.1115/1.4012236
Topics:
Equations of state
,
Waves
Discussion: “The Viscosity of Five Gases: A Re-Evaluation” (Kestin, J., and Wang, H. E., 1958, Trans. ASME, 80, pp. 11–17)
Trans. ASME. January 1958, 80(1): 17.
doi: https://doi.org/10.1115/1.4012238
Closure to “Discussion of ‘The Viscosity of Five Gases: A Re-Evaluation’” (1958, Trans. ASME, 80, p. 17)
Trans. ASME. January 1958, 80(1): 17.
doi: https://doi.org/10.1115/1.4012239
Discussion: “Convection Heat Transfer and Pressure Drop of Air Flowing Across In-Line Tube Banks: II—Correlation of Data for Ten-Row-Deep Tube Banks” (Gram, A. J., Mackey, C. O., and Monroe, Jr., E. S., 1958, Trans. ASME, 80, pp. 25–34)
Trans. ASME. January 1958, 80(1): 34–35.
doi: https://doi.org/10.1115/1.4012242
Topics:
Convection
,
Pressure drop
Discussion: “Convection Heat Transfer and Pressure Drop of Air Flowing Across In-Line Tube Banks: II—Correlation of Data for Ten-Row-Deep Tube Banks” (Gram, A. J., Mackey, C. O., and Monroe, Jr., E. S., 1958, Trans. ASME, 80, pp. 25–34)
Trans. ASME. January 1958, 80(1): 35.
doi: https://doi.org/10.1115/1.4012243
Topics:
Convection
,
Pressure drop
Closure to “Discussions of ‘Convection Heat Transfer and Pressure Drop of Air Flowing Across In-Line Tube Banks: II—Correlation of Data for Ten-Row-Deep Tube Banks’” (1958, Trans. ASME, 80, pp. 34–35)
Trans. ASME. January 1958, 80(1): 35.
doi: https://doi.org/10.1115/1.4012244
Topics:
Convection
,
Pressure drop
Closure to “Discussions of ‘Shell-Side Characteristics of Shell-and-Tube Heat Exchangers: A Simplified Rating System for Commercial Heat Exchangers’” (1958, Trans. ASME, 80, pp. 49–50)
Trans. ASME. January 1958, 80(1): 50–52.
doi: https://doi.org/10.1115/1.4012248
Topics:
Heat
,
Heat exchangers
,
Shells
Discussion: “Sublimation From Disks to Air Streams Flowing Normal to Their Surfaces” (Sogin, H. H., 1958, Trans. ASME, 80, pp. 61–67)
Trans. ASME. January 1958, 80(1): 68.
doi: https://doi.org/10.1115/1.4012251
Topics:
Disks
Closure to “Discussion of ‘Sublimation From Disks to Air Streams Flowing Normal to Their Surfaces’” (1958, Trans. ASME, 80, p. 68)
Trans. ASME. January 1958, 80(1): 68–69.
doi: https://doi.org/10.1115/1.4012252
Topics:
Disks
Discussion: “Heat Transfer From a Rotating Cylinder With and Without Crossflow” (Kays, W. M., and Bjorklund, I. S., 1958, Trans. ASME, 80, pp. 70–77)
Trans. ASME. January 1958, 80(1): 77–78.
doi: https://doi.org/10.1115/1.4012254
Topics:
Cylinders
,
Heat transfer
Closure to “Discussion of ‘Heat Transfer From a Rotating Cylinder With and Without Crossflow’” (1958, Trans. ASME, 80, pp. 77–78)
Trans. ASME. January 1958, 80(1): 78.
doi: https://doi.org/10.1115/1.4012255
Topics:
Cylinders
,
Heat transfer
Discussion: “Heat-Transfer Characteristics of the Rotational and Axial Flow Between Concentric Cylinders” (Gazley, Jr., Carl, 1958, Trans. ASME, 80, pp. 79–89)
Trans. ASME. January 1958, 80(1): 89–90.
doi: https://doi.org/10.1115/1.4012257
Topics:
Axial flow
,
Cylinders
,
Heat transfer
Closure to “Discussion of ‘Heat-Transfer Characteristics of the Rotational and Axial Flow Between Concentric Cylinders’” (1958, Trans. ASME, 80, pp. 89–90)
Trans. ASME. January 1958, 80(1): 90.
doi: https://doi.org/10.1115/1.4012258
Topics:
Axial flow
,
Heat transfer
Discussion: “Accelerated Field Tests of Cavitation Intensity” (Knapp, R. T., 1958, Trans. ASME, 80, pp. 91–96)
Trans. ASME. January 1958, 80(1): 97.
doi: https://doi.org/10.1115/1.4012260
Topics:
Cavitation
Discussion: “Accelerated Field Tests of Cavitation Intensity” (Knapp, R. T., 1958, Trans. ASME, 80, pp. 91–96)
Trans. ASME. January 1958, 80(1): 97–98.
doi: https://doi.org/10.1115/1.4012261
Topics:
Cavitation
Discussion: “Accelerated Field Tests of Cavitation Intensity” (Knapp, R. T., 1958, Trans. ASME, 80, pp. 91–96)
Trans. ASME. January 1958, 80(1): 98.
doi: https://doi.org/10.1115/1.4012262
Topics:
Cavitation
Discussion: “Accelerated Field Tests of Cavitation Intensity” (Knapp, R. T., 1958, Trans. ASME, 80, pp. 91–96)
Trans. ASME. January 1958, 80(1): 98.
doi: https://doi.org/10.1115/1.4012263
Topics:
Cavitation
Discussion: “Accelerated Field Tests of Cavitation Intensity” (Knapp, R. T., 1958, Trans. ASME, 80, pp. 91–96)
Trans. ASME. January 1958, 80(1): 99–100.
doi: https://doi.org/10.1115/1.4012264
Topics:
Cavitation
Discussion: “Accelerated Field Tests of Cavitation Intensity” (Knapp, R. T., 1958, Trans. ASME, 80, pp. 91–96)
Trans. ASME. January 1958, 80(1): 100.
doi: https://doi.org/10.1115/1.4012265
Topics:
Cavitation
Closure to “Discussions of ‘Accelerated Field Tests of Cavitation Intensity’” (1958, Trans. ASME, 80, pp. 97–100)
Trans. ASME. January 1958, 80(1): 100–102.
doi: https://doi.org/10.1115/1.4012266
Topics:
Cavitation
Discussion: “Progress Report on Standardization of the Vibratory-Cavitation Test” (Robinson, L. E., Holmes, B. A., and Leith, W. C., 1958, Trans. ASME, 80, pp. 103–106)
Trans. ASME. January 1958, 80(1): 106–107.
doi: https://doi.org/10.1115/1.4012268
Topics:
Cavitation
Discussion: “Progress Report on Standardization of the Vibratory-Cavitation Test” (Robinson, L. E., Holmes, B. A., and Leith, W. C., 1958, Trans. ASME, 80, pp. 103–106)
Trans. ASME. January 1958, 80(1): 107.
doi: https://doi.org/10.1115/1.4012269
Topics:
Cavitation
Closure to “Discussions of ‘Progress Report on Standardization of the Vibratory-Cavitation Test’” (1958, Trans. ASME, 80, pp. 106–107)
Trans. ASME. January 1958, 80(1): 107.
doi: https://doi.org/10.1115/1.4012270
Topics:
Cavitation
Discussion: “Equivalent Performance Parameters for Turboblowers and Compressors” (Davis, Hunt, 1958, Trans. ASME, 80, pp. 108–113)
Trans. ASME. January 1958, 80(1): 113–115.
doi: https://doi.org/10.1115/1.4012272
Topics:
Compressors
Closure to “Discussion of ‘Equivalent Performance Parameters for Turboblowers and Compressors’” (1958, Trans. ASME, 80, pp. 113–115)
Trans. ASME. January 1958, 80(1): 115–116.
doi: https://doi.org/10.1115/1.4012273
Discussion: “Cold Extrusion of Unalloyed Titanium” (Sabroff, A. M., Huber, O. J., and Frost, P. D., 1958, Trans. ASME, 80, pp. 124–131)
Trans. ASME. January 1958, 80(1): 131.
doi: https://doi.org/10.1115/1.4012279
Discussion: “Cold Extrusion of Unalloyed Titanium” (Sabroff, A. M., Huber, O. J., and Frost, P. D., 1958, Trans. ASME, 80, pp. 124–131)
Trans. ASME. January 1958, 80(1): 131.
doi: https://doi.org/10.1115/1.4012280
Discussion: “Cold Extrusion of Unalloyed Titanium” (Sabroff, A. M., Huber, O. J., and Frost, P. D., 1958, Trans. ASME, 80, pp. 124–131)
Trans. ASME. January 1958, 80(1): 132.
doi: https://doi.org/10.1115/1.4012281
Closure to “Discussions of ‘Cold Extrusion of Unalloyed Titanium’” (1958, Trans. ASME, 80, pp. 131–132)
Trans. ASME. January 1958, 80(1): 132.
doi: https://doi.org/10.1115/1.4012282
Topics:
Extruding
Discussion: “An Experimental Study on Chatter Vibrations in Grinding Operations” (Doi, S., 1958, Trans. ASME, 80, pp. 133–140)
Trans. ASME. January 1958, 80(1): 140.
doi: https://doi.org/10.1115/1.4012284
Discussion: “An Experimental Study on Chatter Vibrations in Grinding Operations” (Doi, S., 1958, Trans. ASME, 80, pp. 133–140)
Trans. ASME. January 1958, 80(1): 140.
doi: https://doi.org/10.1115/1.4012285
Closure to “Discussions of ‘An Experimental Study on Chatter Vibrations in Grinding Operations’” (1958, Trans. ASME, 80, p. 140)
Trans. ASME. January 1958, 80(1): 140.
doi: https://doi.org/10.1115/1.4012286
Discussion: “On the Basic Mechanics of the Grinding Process” (Backer, W. R., and Merchant, M. E., 1958, Trans. ASME, 80, pp. 141–146)
Trans. ASME. January 1958, 80(1): 146.
doi: https://doi.org/10.1115/1.4012288
Topics:
Grinding
Discussion: “On the Basic Mechanics of the Grinding Process” (Backer, W. R., and Merchant, M. E., 1958, Trans. ASME, 80, pp. 141–146)
Trans. ASME. January 1958, 80(1): 146–147.
doi: https://doi.org/10.1115/1.4012289
Topics:
Grinding
Discussion: “On the Basic Mechanics of the Grinding Process” (Backer, W. R., and Merchant, M. E., 1958, Trans. ASME, 80, pp. 141–146)
Trans. ASME. January 1958, 80(1): 147.
doi: https://doi.org/10.1115/1.4012290
Topics:
Grinding
Closure to “Discussions of ‘On the Basic Mechanics of the Grinding Process’” (1958, Trans. ASME, 80, pp. 146–147)
Trans. ASME. January 1958, 80(1): 147–148.
doi: https://doi.org/10.1115/1.4012291
Topics:
Grinding
Discussion: “Shear-Strain Rate in Metal Cutting and Its Effects on Shear-Flow Stress” (Kececioglu, Dimitri, 1958, Trans. ASME, 80, pp. 158–167)
Trans. ASME. January 1958, 80(1): 167–168.
doi: https://doi.org/10.1115/1.4012294
Topics:
Metal cutting
,
Shear (Mechanics)
,
Shear flow
,
Stress
Closure to “Discussion of ‘Shear-Strain Rate in Metal Cutting and Its Effects on Shear-Flow Stress’” (1958, Trans. ASME, 80, pp. 167–168)
Trans. ASME. January 1958, 80(1): 168.
doi: https://doi.org/10.1115/1.4012295
Topics:
Metal cutting
,
Shear (Mechanics)
,
Shear flow
Discussion: “A Method for Calculating Vibration Frequency and Stress of a Banded Group of Turbine Buckets” (Prohl, M. A., 1958, Trans. ASME, 80, pp. 169–179)
Trans. ASME. January 1958, 80(1): 179.
doi: https://doi.org/10.1115/1.4012297
Topics:
Oscillating frequencies
,
Stress
,
Turbines
Discussion: “A Method for Calculating Vibration Frequency and Stress of a Banded Group of Turbine Buckets” (Prohl, M. A., 1958, Trans. ASME, 80, pp. 169–179)
Trans. ASME. January 1958, 80(1): 179.
doi: https://doi.org/10.1115/1.4012298
Topics:
Oscillating frequencies
,
Stress
,
Turbines
Closure to “Discussions of ‘A Method for Calculating Vibration Frequency and Stress of a Banded Group of Turbine Buckets’” (1958, Trans. ASME, 80, p. 179)
Trans. ASME. January 1958, 80(1): 179–180.
doi: https://doi.org/10.1115/1.4012299
Topics:
Oscillating frequencies
,
Stress
,
Turbines
Discussion: “High-Frequency Vibration of Steam-Turbine Buckets” (Weaver, F. L., and Prohl, M. A., 1958, Trans. ASME, 80, pp. 181–189)
Trans. ASME. January 1958, 80(1): 189–190.
doi: https://doi.org/10.1115/1.4012301
Topics:
Steam turbines
,
Vibration
Discussion: “High-Frequency Vibration of Steam-Turbine Buckets” (Weaver, F. L., and Prohl, M. A., 1958, Trans. ASME, 80, pp. 181–189)
Trans. ASME. January 1958, 80(1): 190–194.
doi: https://doi.org/10.1115/1.4012302
Topics:
Steam turbines
,
Vibration
Closure to “Discussions of ‘High-Frequency Vibration of Steam-Turbine Buckets’” (1958, Trans. ASME, 80, pp. 189–194)
Trans. ASME. January 1958, 80(1): 194.
doi: https://doi.org/10.1115/1.4012303
Topics:
Steam turbines
,
Vibration
Discussion: “Experimental Determination of Gear Tooth Stresses in Large Marine Gears” (Semar, H. W., and McGinnis, R. E., 1958, Trans. ASME, 80, pp. 195–200)
Trans. ASME. January 1958, 80(1): 200.
doi: https://doi.org/10.1115/1.4012305
Topics:
Gear teeth
,
Gears
,
Stress
Discussion: “Experimental Determination of Gear Tooth Stresses in Large Marine Gears” (Semar, H. W., and McGinnis, R. E., 1958, Trans. ASME, 80, pp. 195–200)
Trans. ASME. January 1958, 80(1): 200–201.
doi: https://doi.org/10.1115/1.4012306
Topics:
Gear teeth
,
Gears
,
Stress
Discussion: “Experimental Determination of Gear Tooth Stresses in Large Marine Gears” (Semar, H. W., and McGinnis, R. E., 1958, Trans. ASME, 80, pp. 195–200)
Trans. ASME. January 1958, 80(1): 201.
doi: https://doi.org/10.1115/1.4012307
Topics:
Gear teeth
,
Gears
,
Stress
Discussion: “Experimental Determination of Gear Tooth Stresses in Large Marine Gears” (Semar, H. W., and McGinnis, R. E., 1958, Trans. ASME, 80, pp. 195–200)
Trans. ASME. January 1958, 80(1): 201.
doi: https://doi.org/10.1115/1.4012308
Topics:
Gear teeth
,
Gears
,
Stress
Closure to “Discussions of ‘Experimental Determination of Gear Tooth Stresses in Large Marine Gears’” (1958, Trans. ASME, 80, pp. 200–201)
Trans. ASME. January 1958, 80(1): 201.
doi: https://doi.org/10.1115/1.4012309
Topics:
Gear teeth
,
Stress
Discussion: “Calculation of Theoretical Flame Temperatures in Furnaces” (Myers, J. W., Goldberg, S. A., and Smith, Jr., R. W., 1958, Trans. ASME, 80, pp. 202–215)
Trans. ASME. January 1958, 80(1): 215.
doi: https://doi.org/10.1115/1.4012311
Topics:
Flames
,
Furnaces
,
Temperature
Closure to “Discussion of ‘Calculation of Theoretical Flame Temperatures in Furnaces’” (1958, Trans. ASME, 80, p. 215)
Trans. ASME. January 1958, 80(1): 215–216.
doi: https://doi.org/10.1115/1.4012312
Topics:
Flames
,
Temperature
Closure to “Discussions of ‘In-Service Washing of Ljungstrom Air Preheaters on Pulverized Coal-Fired Steam Generators’” (1958, Trans. ASME, 80, pp. 222–223)
Trans. ASME. January 1958, 80(1): 223–224.
doi: https://doi.org/10.1115/1.4012317
Discussion: “The Formation of Sulphuric Acid in Boiler Flue Gases” (Harlow, W. F., 1958, Trans. ASME, 80, pp. 225–232)
Trans. ASME. January 1958, 80(1): 232.
doi: https://doi.org/10.1115/1.4012319
Topics:
Boilers
,
Flue gases
Discussion: “The Formation of Sulphuric Acid in Boiler Flue Gases” (Harlow, W. F., 1958, Trans. ASME, 80, pp. 225–232)
Trans. ASME. January 1958, 80(1): 232–233.
doi: https://doi.org/10.1115/1.4012320
Topics:
Boilers
,
Flue gases
Discussion: “The Formation of Sulphuric Acid in Boiler Flue Gases” (Harlow, W. F., 1958, Trans. ASME, 80, pp. 225–232)
Trans. ASME. January 1958, 80(1): 233.
doi: https://doi.org/10.1115/1.4012321
Topics:
Boilers
,
Flue gases
Closure to “Discussions of ‘The Formation of Sulphuric Acid in Boiler Flue Gases’” (1958, Trans. ASME, 80, pp. 232–233)
Trans. ASME. January 1958, 80(1): 233–234.
doi: https://doi.org/10.1115/1.4012322
Discussion: “The Application of Gas/Liquid Cyclones in Oil Refining” (Van Dongen, J. R. J., and Ter Linden, A. J., 1958, Trans. ASME, 80, pp. 245–249)
Trans. ASME. January 1958, 80(1): 249.
doi: https://doi.org/10.1115/1.4012325
Topics:
Oil refining
Discussion: “The Application of Gas/Liquid Cyclones in Oil Refining” (Van Dongen, J. R. J., and Ter Linden, A. J., 1958, Trans. ASME, 80, pp. 245–249)
Trans. ASME. January 1958, 80(1): 249–250.
doi: https://doi.org/10.1115/1.4012326
Topics:
Oil refining
Discussion: “The Application of Gas/Liquid Cyclones in Oil Refining” (Van Dongen, J. R. J., and Ter Linden, A. J., 1958, Trans. ASME, 80, pp. 245–249)
Trans. ASME. January 1958, 80(1): 250.
doi: https://doi.org/10.1115/1.4012327
Topics:
Oil refining
Discussion: “The Application of Gas/Liquid Cyclones in Oil Refining” (Van Dongen, J. R. J., and Ter Linden, A. J., 1958, Trans. ASME, 80, pp. 245–249)
Trans. ASME. January 1958, 80(1): 250.
doi: https://doi.org/10.1115/1.4012328
Topics:
Oil refining
Closure to “Discussions of ‘The Application of Gas/Liquid Cyclones in Oil Refining’” (1958, Trans. ASME, 80, pp. 249–250)
Trans. ASME. January 1958, 80(1): 250–251.
doi: https://doi.org/10.1115/1.4012329
Discussion: “Concurrent Flow of Air, Gas-Oil, and Water in a Horizontal Pipe” (Sobocinski, D. P., and Huntington, R. L., 1958, Trans. ASME, 80, pp. 252–255)
Trans. ASME. January 1958, 80(1): 255–256.
doi: https://doi.org/10.1115/1.4012331
Topics:
Flow (Dynamics)
,
Pipes
,
Water
Discussion: “Concurrent Flow of Air, Gas-Oil, and Water in a Horizontal Pipe” (Sobocinski, D. P., and Huntington, R. L., 1958, Trans. ASME, 80, pp. 252–255)
Trans. ASME. January 1958, 80(1): 256.
doi: https://doi.org/10.1115/1.4012332
Topics:
Flow (Dynamics)
,
Pipes
,
Water
Email alerts
RSS Feeds
Effect of Power-Law Fluids Flow Structures on Germicides Disinfection Through Taylor–Couette Configuration
J. Fluids Eng (March 2024)
A Method to Determine Bubble Distribution in Liquid Using Data of Inverse Acoustical Scattering
J. Fluids Eng (March 2024)
