Skip to Main Content
American Society of Mechanical Engineers: Digital Collection
Cart
header search
Search
Advanced Search
Skip Nav Destination

Issues

Volume 78, Issue 5
July 1956
This article was originally published in
Transactions of the American Society of Mechanical Engineers
Issue Cover
ISSN 0097-6822
In this Issue

Research Papers

Behavior of Air in the Hydrostatic Lubrication of Loaded Spherical Bearings
T. L. Corey, C. M. Tyler, Jr., H. H. Rowand, Jr., E. M. Kipp
Trans. ASME. July 1956, 78(5): 893–898. doi: https://doi.org/10.1115/1.4013861
View articletitled, Behavior of Air in the Hydrostatic Lubrication of Loaded Spherical Bearings
Open the PDF for in another window
Topics: Bearings , Hydrostatics , Lubrication , Pressure , Flow (Dynamics) , Load bearing capacity , Stress
Power Loss in Elliptical and 3-Lobe Bearings
Oscar Pinkus
Trans. ASME. July 1956, 78(5): 899–904. doi: https://doi.org/10.1115/1.4013862
View articletitled, Power Loss in Elliptical and 3-Lobe Bearings
Open the PDF for in another window
Topics: Bearings , Clearances (Engineering) , Stress , Symmetry (Physics)
Prediction of Lubricating-Oil Viscosities at High Pressures
O. H. Clark
Trans. ASME. July 1956, 78(5): 905–908. doi: https://doi.org/10.1115/1.4013863
View articletitled, Prediction of Lubricating-Oil Viscosities at High Pressures
Open the PDF for in another window
Topics: Lubricating oils , Viscosity , Oils , Petroleum , High pressure (Physics) , Pressure
On the Evaporation of a Drop of Volatile Liquid in High-Temperature Surroundings
W. E. Ranz
Trans. ASME. July 1956, 78(5): 909–912. doi: https://doi.org/10.1115/1.4013864
View articletitled, On the Evaporation of a Drop of Volatile Liquid in High-Temperature Surroundings
Open the PDF for in another window
Topics: Evaporation , High temperature , Heat , Heat transfer , Vapors , Combustion , Convection , Flow (Dynamics) , Forced convection , Heat conduction
Turbulent Flow in the Entrance Region of a Pipe
Donald Ross
Trans. ASME. July 1956, 78(5): 915–921. doi: https://doi.org/10.1115/1.4013867
View articletitled, Turbulent Flow in the Entrance Region of a Pipe
Open the PDF for in another window
Topics: Entrance region , Pipes , Turbulence , Boundary layers , Design , Flow (Dynamics) , Momentum , Pipe flow , Pressure drop , Reynolds number
An Experimental and Analytical Investigation of a Differential Surge-Tank Installation
W. L. Gibson, W. Shelson
Trans. ASME. July 1956, 78(5): 925–936. doi: https://doi.org/10.1115/1.4013870
View articletitled, An Experimental and Analytical Investigation of a Differential Surge-Tank Installation
Open the PDF for in another window
Topics: Surges , Computers , Flow (Dynamics) , Gates (Closures) , Hydraulic drive systems , Oscilloscopes , Turbines , Water hammer
Density-Temperature-Pressure Relations for Liquid Lubricants
H. A. Hartung
Trans. ASME. July 1956, 78(5): 941–946. doi: https://doi.org/10.1115/1.4013876
View articletitled, Density-Temperature-Pressure Relations for Liquid Lubricants
Open the PDF for in another window
Topics: Density , Lubricants , Pressure , Temperature , Petroleum , Atmospheric pressure , Fluids , Polymers , Temperature effects , Viscosity
Finite Journal Bearings With Arbitrary Position of Source
J. V. Fedor
Trans. ASME. July 1956, 78(5): 949–953. doi: https://doi.org/10.1115/1.4013880
View articletitled, Finite Journal Bearings With Arbitrary Position of Source
Open the PDF for in another window
Topics: Journal bearings , Bearings , Boundary-value problems , Lubrication , Pressure
Very Short Journal-Bearing Hydrodynamic Performance Under Conditions Approaching Marginal Lubrication
L. F. Kreisle
Trans. ASME. July 1956, 78(5): 955–961. doi: https://doi.org/10.1115/1.4013883
View articletitled, Very Short Journal-Bearing Hydrodynamic Performance Under Conditions Approaching Marginal Lubrication
Open the PDF for in another window
Topics: Journal bearings , Lubrication , Bearings , Boundary lubrication , Stress
Analysis of Elliptical Bearings
Oscar Pinkus
Trans. ASME. July 1956, 78(5): 965–972. doi: https://doi.org/10.1115/1.4013888
View articletitled, Analysis of Elliptical Bearings
Open the PDF for in another window
Topics: Bearings , Computers , Differential equations , Flow (Dynamics)
Experimental Investigation of Resonant Whip
Oscar Pinkus
Trans. ASME. July 1956, 78(5): 975–983. doi: https://doi.org/10.1115/1.4013891
View articletitled, Experimental Investigation of Resonant Whip
Open the PDF for in another window
Topics: Resonance , Bearings , Viscosity , Stability , Stress , Pressure , Vibration
Varieties of Shaft Disturbances Due to Fluid Films in Journal Bearings
B. L. Newkirk
Trans. ASME. July 1956, 78(5): 985–987. doi: https://doi.org/10.1115/1.4013892
View articletitled, Varieties of Shaft Disturbances Due to Fluid Films in Journal Bearings
Open the PDF for in another window
Topics: Fluid films , Journal bearings
Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life
H. V. Cordiano, E. P. Cochran, Jr., R. J. Wolfe
Trans. ASME. July 1956, 78(5): 989–993. doi: https://doi.org/10.1115/1.4013896
View articletitled, Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life
Open the PDF for in another window
Topics: Ball bearings , Combustion , Fatigue life , Fluids , Bearings , Ester , Water , Fatigue failure , Floods , Lubricants
Operating Characteristics of High-Speed Ball Bearings at High Oil-Flow Rates
C. C. Moore, F. C. Jones
Trans. ASME. July 1956, 78(5): 997–1001. doi: https://doi.org/10.1115/1.4013903
View articletitled, Operating Characteristics of High-Speed Ball Bearings at High Oil-Flow Rates
Open the PDF for in another window
Topics: Ball bearings , Flow (Dynamics) , Friction , Lubricants , Petroleum , Temperature
Thermal-Cycling Test of a Hot Spot on a Vessel
P. N. Randall, H. A. Lang
Trans. ASME. July 1956, 78(5): 1003–1009. doi: https://doi.org/10.1115/1.4013907
View articletitled, Thermal-Cycling Test of a Hot Spot on a Vessel
Open the PDF for in another window
Topics: Cooling , Cracking (Materials) , Cycles , Fracture (Process) , Heating , Heating and cooling , Mechanical properties , Pipes , Shells , Temperature
Some Cases of Stress Due to Temperature Gradient
D. J. Bergman
Trans. ASME. July 1956, 78(5): 1011–1017. doi: https://doi.org/10.1115/1.4013910
View articletitled, Some Cases of Stress Due to Temperature Gradient
Open the PDF for in another window
Topics: Stress , Temperature gradient , Pipes , Temperature , Vessels , Corrosion , Creep , Flat plates , Heat , Heating
High-Temperature Stability of Insulating and Refractory Castables in Reducing and Oxidizing Atmospheres
C. M. Vogrin, H. Heep
Trans. ASME. July 1956, 78(5): 1021–1028. doi: https://doi.org/10.1115/1.4013913
View articletitled, High-Temperature Stability of Insulating and Refractory Castables in Reducing and Oxidizing Atmospheres
Open the PDF for in another window
Topics: Carbon dioxide , Corrosion , Cracking (Materials) , Erosion , Fluids , Fracture (Process) , Heat , High temperature , Linings (Textiles) , Methane
Yield and Bursting Characteristics of Heavy-Wall Cylinders
J. H. Faupel
Trans. ASME. July 1956, 78(5): 1031–1061. doi: https://doi.org/10.1115/1.4013916
View articletitled, Yield and Bursting Characteristics of Heavy-Wall Cylinders
Open the PDF for in another window
Topics: Cylinders , Pressure , Certainty , Design
Ebullition Cooling of Gas Engines
G. O. Bates, J. E. English, G. M. Franklin
Trans. ASME. July 1956, 78(5): 1065–1069. doi: https://doi.org/10.1115/1.4013920
View articletitled, Ebullition Cooling of Gas Engines
Open the PDF for in another window
Topics: Cooling , Gas engines , Engines , Water , Boiling , Combustion , Cooling systems , Economics , Maintenance , Pumps
Resistance Coefficients for Accelerated and Decelerated Flows Through Smooth Tubes and Orifices
J. W. Daily, W. L. Hankey, Jr., R. W. Olive, J. M. Jordaan, Jr.
Trans. ASME. July 1956, 78(5): 1071–1077. doi: https://doi.org/10.1115/1.4013923
View articletitled, Resistance Coefficients for Accelerated and Decelerated Flows Through Smooth Tubes and Orifices
Open the PDF for in another window
Topics: Flow (Dynamics) , Orifices , Steady state , Diffusion (Physics) , Shear (Mechanics) , Shear stress , Turbulence , Unsteady flow , Water tunnels
Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe
F. Numachi, H. Murai, S. Abe
Trans. ASME. July 1956, 78(5): 1079–1086. doi: https://doi.org/10.1115/1.4013926
View articletitled, Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe
Open the PDF for in another window
Topics: Flow (Dynamics) , Flowmeters , Pipes , Water , Chords (Trusses) , Flow measurement , Hydropower , Pumps , Storage
A Comparison of Regenerative-Pump Theories Supported by New Performance Data
Yasutoshi Senoo
Trans. ASME. July 1956, 78(5): 1091–1095. doi: https://doi.org/10.1115/1.4013932
View articletitled, A Comparison of Regenerative-Pump Theories Supported by New Performance Data
Open the PDF for in another window
Topics: Pumps , Geometry , Design , Fluids , Testing
Process Design of Tubular Heaters
L. A. Mekler
Trans. ASME. July 1956, 78(5): 1103–1109. doi: https://doi.org/10.1115/1.4013939
View articletitled, Process Design of Tubular Heaters
Open the PDF for in another window
Topics: Heat , Process design , Temperature
On the Tool-Life and Temperature Relationship in Metal Cutting
F. F. Ling, Edward Saibel
Trans. ASME. July 1956, 78(5): 1113–1116. doi: https://doi.org/10.1115/1.4013943
View articletitled, On the Tool-Life and Temperature Relationship in Metal Cutting
Open the PDF for in another window
Topics: Metal cutting , Temperature , Cutting , Rupture , Cutting tools , Failure
The Mechanism of Crater Wear of Cemented Carbide Tools
K. J. Trigger, B. T. Chao
Trans. ASME. July 1956, 78(5): 1119–1126. doi: https://doi.org/10.1115/1.4013947
View articletitled, The Mechanism of Crater Wear of Cemented Carbide Tools
Open the PDF for in another window
Topics: Carbide cutting tools , Wear , Temperature , Adhesion , Metal surfaces
Chatter Vibration of Lathe Tools
S. Doi, S. Kato
Trans. ASME. July 1956, 78(5): 1127–1133. doi: https://doi.org/10.1115/1.4013950
View articletitled, Chatter Vibration of Lathe Tools
Open the PDF for in another window
Topics: Chatter , Vibration , Cutting , Delays , Metals
Study of Die Wear by Means of Radioactivated Surfaces
B. J. Jaoul
Trans. ASME. July 1956, 78(5): 1135–1139. doi: https://doi.org/10.1115/1.4013956
View articletitled, Study of Die Wear by Means of Radioactivated Surfaces
Open the PDF for in another window
Topics: Wear , Automobiles , Biology , Biomedicine , Chemistry , Cylinders , Dry friction , Extruding , Friction , Gears
Hydraulic-Turbine Runner Vibration
R. M. Donaldson
Trans. ASME. July 1956, 78(5): 1141–1144. doi: https://doi.org/10.1115/1.4013957
View articletitled, Hydraulic-Turbine Runner Vibration
Open the PDF for in another window
Topics: Hydraulic turbines , Vibration , Excitation , Francis turbines , Shapes

Discussions and Closures

Discussion: “On the Evaporation of a Drop of Volatile Liquid in High-Temperature Surroundings” (Ranz, W. E., 1956, Trans. ASME, 78, pp. 909–912)
O. A. Uyehara, P. S. Myers
Trans. ASME. July 1956, 78(5): 912–913. doi: https://doi.org/10.1115/1.4013865
View articletitled, Discussion: “On the Evaporation of a Drop of Volatile Liquid in High-Temperature Surroundings” (Ranz, W. E., 1956, Trans. ASME, 78, pp. 909–912)
Open the PDF for in another window
Topics: Evaporation , High temperature
Closure to “Discussion of ‘On the Evaporation of a Drop of Volatile Liquid in High-Temperature Surroundings’” (1956, Trans. ASME, 78, pp. 912–913)
W. E. Ranz
Trans. ASME. July 1956, 78(5): 913. doi: https://doi.org/10.1115/1.4013866
View articletitled, Closure to “Discussion of ‘On the Evaporation of a Drop of Volatile Liquid in High-Temperature Surroundings’” (1956, Trans. ASME, 78, pp. 912–913)
Open the PDF for in another window
Topics: Evaporation , High temperature
Discussion: “Turbulent Flow in the Entrance Region of a Pipe” (Ross, Donald, 1956, Trans. ASME, 78, pp. 915–921)
N. Tetervin
Trans. ASME. July 1956, 78(5): 921–922. doi: https://doi.org/10.1115/1.4013868
View articletitled, Discussion: “Turbulent Flow in the Entrance Region of a Pipe” (Ross, Donald, 1956, Trans. ASME, 78, pp. 915–921)
Open the PDF for in another window
Topics: Entrance region , Pipes , Turbulence
Closure to “Discussion of ‘Turbulent Flow in the Entrance Region of a Pipe’” (1956, Trans. ASME, 78, pp. 921–922)
Donald Ross
Trans. ASME. July 1956, 78(5): 922–923. doi: https://doi.org/10.1115/1.4013869
View articletitled, Closure to “Discussion of ‘Turbulent Flow in the Entrance Region of a Pipe’” (1956, Trans. ASME, 78, pp. 921–922)
Open the PDF for in another window
Topics: Entrance region , Turbulence
Discussion: “An Experimental and Analytical Investigation of a Differential Surge-Tank Installation” (Gibson, W. L., and Shelson, W., 1956, Trans. ASME, 78, pp. 925–936)
F. E. Cornwell, Ben Donsky
Trans. ASME. July 1956, 78(5): 936–937. doi: https://doi.org/10.1115/1.4013871
View articletitled, Discussion: “An Experimental and Analytical Investigation of a Differential Surge-Tank Installation” (Gibson, W. L., and Shelson, W., 1956, Trans. ASME, 78, pp. 925–936)
Open the PDF for in another window
Topics: Surges
Discussion: “An Experimental and Analytical Investigation of a Differential Surge-Tank Installation” (Gibson, W. L., and Shelson, W., 1956, Trans. ASME, 78, pp. 925–936)
Charles Jaeger
Trans. ASME. July 1956, 78(5): 937–938. doi: https://doi.org/10.1115/1.4013872
View articletitled, Discussion: “An Experimental and Analytical Investigation of a Differential Surge-Tank Installation” (Gibson, W. L., and Shelson, W., 1956, Trans. ASME, 78, pp. 925–936)
Open the PDF for in another window
Topics: Surges
Discussion: “An Experimental and Analytical Investigation of a Differential Surge-Tank Installation” (Gibson, W. L., and Shelson, W., 1956, Trans. ASME, 78, pp. 925–936)
M. G. Salzman
Trans. ASME. July 1956, 78(5): 938. doi: https://doi.org/10.1115/1.4013873
View articletitled, Discussion: “An Experimental and Analytical Investigation of a Differential Surge-Tank Installation” (Gibson, W. L., and Shelson, W., 1956, Trans. ASME, 78, pp. 925–936)
Open the PDF for in another window
Topics: Surges
Discussion: “An Experimental and Analytical Investigation of a Differential Surge-Tank Installation” (Gibson, W. L., and Shelson, W., 1956, Trans. ASME, 78, pp. 925–936)
E. B. Strowger
Trans. ASME. July 1956, 78(5): 938. doi: https://doi.org/10.1115/1.4013874
View articletitled, Discussion: “An Experimental and Analytical Investigation of a Differential Surge-Tank Installation” (Gibson, W. L., and Shelson, W., 1956, Trans. ASME, 78, pp. 925–936)
Open the PDF for in another window
Topics: Surges
Closure to “Discussions of ‘An Experimental and Analytical Investigation of a Differential Surge-Tank Installation’” (1956, Trans. ASME, 78, pp. 936–938)
W. L. Gibson, W. Shelson
Trans. ASME. July 1956, 78(5): 938–940. doi: https://doi.org/10.1115/1.4013875
View articletitled, Closure to “Discussions of ‘An Experimental and Analytical Investigation of a Differential Surge-Tank Installation’” (1956, Trans. ASME, 78, pp. 936–938)
Open the PDF for in another window
Topics: Surges
Discussion: “Density-Temperature-Pressure Relations for Liquid Lubricants” (Hartung, H. A., 1956, Trans. ASME, 78, pp. 941–946)
A. A. Bondi
Trans. ASME. July 1956, 78(5): 946. doi: https://doi.org/10.1115/1.4013877
View articletitled, Discussion: “Density-Temperature-Pressure Relations for Liquid Lubricants” (Hartung, H. A., 1956, Trans. ASME, 78, pp. 941–946)
Open the PDF for in another window
Topics: Density , Lubricants , Pressure , Temperature
Discussion: “Density-Temperature-Pressure Relations for Liquid Lubricants” (Hartung, H. A., 1956, Trans. ASME, 78, pp. 941–946)
Wayne Webb
Trans. ASME. July 1956, 78(5): 946–947. doi: https://doi.org/10.1115/1.4013878
View articletitled, Discussion: “Density-Temperature-Pressure Relations for Liquid Lubricants” (Hartung, H. A., 1956, Trans. ASME, 78, pp. 941–946)
Open the PDF for in another window
Topics: Density , Lubricants , Pressure , Temperature
Closure to “Discussions of ‘Density-Temperature-Pressure Relations for Liquid Lubricants’” (1956, Trans. ASME, 78, pp. 946–947)
H. A. Hartung
Trans. ASME. July 1956, 78(5): 947. doi: https://doi.org/10.1115/1.4013879
View articletitled, Closure to “Discussions of ‘Density-Temperature-Pressure Relations for Liquid Lubricants’” (1956, Trans. ASME, 78, pp. 946–947)
Open the PDF for in another window
Topics: Density , Pressure , Temperature
Discussion: “Finite Journal Bearings With Arbitrary Position of Source” (Fedor, J. V., 1956, Trans. ASME, 78, pp. 949–953)
J. A. Cole
Trans. ASME. July 1956, 78(5): 953–954. doi: https://doi.org/10.1115/1.4013881
View articletitled, Discussion: “Finite Journal Bearings With Arbitrary Position of Source” (Fedor, J. V., 1956, Trans. ASME, 78, pp. 949–953)
Open the PDF for in another window
Topics: Journal bearings
Closure to “Discussion of ‘Finite Journal Bearings With Arbitrary Position of Source’” (1956, Trans. ASME, 78, pp. 953–954)
J. V. Fedor
Trans. ASME. July 1956, 78(5): 954. doi: https://doi.org/10.1115/1.4013882
View articletitled, Closure to “Discussion of ‘Finite Journal Bearings With Arbitrary Position of Source’” (1956, Trans. ASME, 78, pp. 953–954)
Open the PDF for in another window
Topics: Journal bearings
Discussion: “Very Short Journal-Bearing Hydrodynamic Performance Under Conditions Approaching Marginal Lubrication” (Kreisle, L. F., 1956, Trans. ASME, 78, pp. 955–961)
A. Bondi
Trans. ASME. July 1956, 78(5): 961. doi: https://doi.org/10.1115/1.4013884
View articletitled, Discussion: “Very Short Journal-Bearing Hydrodynamic Performance Under Conditions Approaching Marginal Lubrication” (Kreisle, L. F., 1956, Trans. ASME, 78, pp. 955–961)
Open the PDF for in another window
Topics: Journal bearings , Lubrication
Discussion: “Very Short Journal-Bearing Hydrodynamic Performance Under Conditions Approaching Marginal Lubrication” (Kreisle, L. F., 1956, Trans. ASME, 78, pp. 955–961)
F. W. Ocvirk
Trans. ASME. July 1956, 78(5): 961. doi: https://doi.org/10.1115/1.4013885
View articletitled, Discussion: “Very Short Journal-Bearing Hydrodynamic Performance Under Conditions Approaching Marginal Lubrication” (Kreisle, L. F., 1956, Trans. ASME, 78, pp. 955–961)
Open the PDF for in another window
Topics: Journal bearings , Lubrication
Discussion: “Very Short Journal-Bearing Hydrodynamic Performance Under Conditions Approaching Marginal Lubrication” (Kreisle, L. F., 1956, Trans. ASME, 78, pp. 955–961)
D. F. Wilcock
Trans. ASME. July 1956, 78(5): 962. doi: https://doi.org/10.1115/1.4013886
View articletitled, Discussion: “Very Short Journal-Bearing Hydrodynamic Performance Under Conditions Approaching Marginal Lubrication” (Kreisle, L. F., 1956, Trans. ASME, 78, pp. 955–961)
Open the PDF for in another window
Topics: Journal bearings , Lubrication
Closure to “Discussions of ‘Very Short Journal-Bearing Hydrodynamic Performance Under Conditions Approaching Marginal Lubrication’” (1956, Trans. ASME, 78, pp. 961–962)
L. F. Kreisle
Trans. ASME. July 1956, 78(5): 962–963. doi: https://doi.org/10.1115/1.4013887
View articletitled, Closure to “Discussions of ‘Very Short Journal-Bearing Hydrodynamic Performance Under Conditions Approaching Marginal Lubrication’” (1956, Trans. ASME, 78, pp. 961–962)
Open the PDF for in another window
Topics: Journal bearings
Discussion: “Analysis of Elliptical Bearings” (Pinkus, Oscar, 1956, Trans. ASME, 78, pp. 965–972)
J. A. Cole
Trans. ASME. July 1956, 78(5): 972–973. doi: https://doi.org/10.1115/1.4013889
View articletitled, Discussion: “Analysis of Elliptical Bearings” (Pinkus, Oscar, 1956, Trans. ASME, 78, pp. 965–972)
Open the PDF for in another window
Topics: Bearings
Closure to “Discussion of ‘Analysis of Elliptical Bearings’” (1956, Trans. ASME, 78, pp. 972–973)
Oscar Pinkus
Trans. ASME. July 1956, 78(5): 973. doi: https://doi.org/10.1115/1.4013890
View articletitled, Closure to “Discussion of ‘Analysis of Elliptical Bearings’” (1956, Trans. ASME, 78, pp. 972–973)
Open the PDF for in another window
Discussion: “Varieties of Shaft Disturbances Due to Fluid Films in Journal Bearings” (Newkirk, B. L., 1956, Trans. ASME, 78, pp. 985–987)
B. Sternlicht
Trans. ASME. July 1956, 78(5): 987–988. doi: https://doi.org/10.1115/1.4013893
View articletitled, Discussion: “Varieties of Shaft Disturbances Due to Fluid Films in Journal Bearings” (Newkirk, B. L., 1956, Trans. ASME, 78, pp. 985–987)
Open the PDF for in another window
Topics: Fluid films , Journal bearings
Discussion: “Varieties of Shaft Disturbances Due to Fluid Films in Journal Bearings” (Newkirk, B. L., 1956, Trans. ASME, 78, pp. 985–987)
Alfred Slibar
Trans. ASME. July 1956, 78(5): 988. doi: https://doi.org/10.1115/1.4013894
View articletitled, Discussion: “Varieties of Shaft Disturbances Due to Fluid Films in Journal Bearings” (Newkirk, B. L., 1956, Trans. ASME, 78, pp. 985–987)
Open the PDF for in another window
Topics: Fluid films , Journal bearings
Closure to “Discussions of ‘Varieties of Shaft Disturbances Due to Fluid Films in Journal Bearings’” (1956, Trans. ASME, 78, pp. 987–988)
B. L. Newkirk
Trans. ASME. July 1956, 78(5): 988. doi: https://doi.org/10.1115/1.4013895
View articletitled, Closure to “Discussions of ‘Varieties of Shaft Disturbances Due to Fluid Films in Journal Bearings’” (1956, Trans. ASME, 78, pp. 987–988)
Open the PDF for in another window
Topics: Fluid films
Discussion: “Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life” (Cordiano, H. V., Cochran, Jr., E. P., and Wolfe, R. J., 1956, Trans. ASME, 78, pp. 989–993)
F. T. Barwell, D. Scott
Trans. ASME. July 1956, 78(5): 994. doi: https://doi.org/10.1115/1.4013897
View articletitled, Discussion: “Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life” (Cordiano, H. V., Cochran, Jr., E. P., and Wolfe, R. J., 1956, Trans. ASME, 78, pp. 989–993)
Open the PDF for in another window
Topics: Ball bearings , Combustion , Fatigue life , Fluids
Discussion: “Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life” (Cordiano, H. V., Cochran, Jr., E. P., and Wolfe, R. J., 1956, Trans. ASME, 78, pp. 989–993)
A. Bondi
Trans. ASME. July 1956, 78(5): 994. doi: https://doi.org/10.1115/1.4013898
View articletitled, Discussion: “Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life” (Cordiano, H. V., Cochran, Jr., E. P., and Wolfe, R. J., 1956, Trans. ASME, 78, pp. 989–993)
Open the PDF for in another window
Topics: Ball bearings , Combustion , Fatigue life , Fluids
Discussion: “Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life” (Cordiano, H. V., Cochran, Jr., E. P., and Wolfe, R. J., 1956, Trans. ASME, 78, pp. 989–993)
D. H. Moreton
Trans. ASME. July 1956, 78(5): 994–995. doi: https://doi.org/10.1115/1.4013899
View articletitled, Discussion: “Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life” (Cordiano, H. V., Cochran, Jr., E. P., and Wolfe, R. J., 1956, Trans. ASME, 78, pp. 989–993)
Open the PDF for in another window
Topics: Ball bearings , Combustion , Fatigue life , Fluids
Discussion: “Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life” (Cordiano, H. V., Cochran, Jr., E. P., and Wolfe, R. J., 1956, Trans. ASME, 78, pp. 989–993)
T. W. Morrison
Trans. ASME. July 1956, 78(5): 995. doi: https://doi.org/10.1115/1.4013900
View articletitled, Discussion: “Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life” (Cordiano, H. V., Cochran, Jr., E. P., and Wolfe, R. J., 1956, Trans. ASME, 78, pp. 989–993)
Open the PDF for in another window
Topics: Ball bearings , Combustion , Fatigue life , Fluids
Discussion: “Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life” (Cordiano, H. V., Cochran, Jr., E. P., and Wolfe, R. J., 1956, Trans. ASME, 78, pp. 989–993)
C. R. Schmitt
Trans. ASME. July 1956, 78(5): 995. doi: https://doi.org/10.1115/1.4013901
View articletitled, Discussion: “Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life” (Cordiano, H. V., Cochran, Jr., E. P., and Wolfe, R. J., 1956, Trans. ASME, 78, pp. 989–993)
Open the PDF for in another window
Topics: Ball bearings , Combustion , Fatigue life , Fluids
Closure to “Discussions of ‘Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life’” (1956, Trans. ASME, 78, pp. 994–995)
H. V. Cordiano, E. P. Cochran, Jr., R. J. Wolfe
Trans. ASME. July 1956, 78(5): 995–996. doi: https://doi.org/10.1115/1.4013902
View articletitled, Closure to “Discussions of ‘Effect of Combustion-Resistant Hydraulic Fluids on Ball-Bearing Fatigue Life’” (1956, Trans. ASME, 78, pp. 994–995)
Open the PDF for in another window
Topics: Ball bearings , Combustion , Fatigue , Fluids
Discussion: “Operating Characteristics of High-Speed Ball Bearings at High Oil-Flow Rates” (Moore, C. C., and Jones, F. C., 1956, Trans. ASME, 78, pp. 997–1001)
W. J. Anderson
Trans. ASME. July 1956, 78(5): 1002. doi: https://doi.org/10.1115/1.4013904
View articletitled, Discussion: “Operating Characteristics of High-Speed Ball Bearings at High Oil-Flow Rates” (Moore, C. C., and Jones, F. C., 1956, Trans. ASME, 78, pp. 997–1001)
Open the PDF for in another window
Topics: Ball bearings , Flow (Dynamics)
Discussion: “Operating Characteristics of High-Speed Ball Bearings at High Oil-Flow Rates” (Moore, C. C., and Jones, F. C., 1956, Trans. ASME, 78, pp. 997–1001)
A. A. Milne
Trans. ASME. July 1956, 78(5): 1002. doi: https://doi.org/10.1115/1.4013905
View articletitled, Discussion: “Operating Characteristics of High-Speed Ball Bearings at High Oil-Flow Rates” (Moore, C. C., and Jones, F. C., 1956, Trans. ASME, 78, pp. 997–1001)
Open the PDF for in another window
Topics: Ball bearings , Flow (Dynamics)
Closure to “Discussions of ‘Operating Characteristics of High-Speed Ball Bearings at High Oil-Flow Rates’” (1956, Trans. ASME, 78, p. 1002)
C. C. Moore, F. C. Jones
Trans. ASME. July 1956, 78(5): 1002. doi: https://doi.org/10.1115/1.4013906
View articletitled, Closure to “Discussions of ‘Operating Characteristics of High-Speed Ball Bearings at High Oil-Flow Rates’” (1956, Trans. ASME, 78, p. 1002)
Open the PDF for in another window
Topics: Ball bearings , Flow (Dynamics)
Discussion: “Thermal-Cycling Test of a Hot Spot on a Vessel” (Randall, P. N., and Lang, H. A., 1956, Trans. ASME, 78, pp. 1003–1009)
Helmut Thielsch
Trans. ASME. July 1956, 78(5): 1009–1010. doi: https://doi.org/10.1115/1.4013908
View articletitled, Discussion: “Thermal-Cycling Test of a Hot Spot on a Vessel” (Randall, P. N., and Lang, H. A., 1956, Trans. ASME, 78, pp. 1003–1009)
Open the PDF for in another window
Topics: Vessels
Closure to “Discussion of ‘Thermal-Cycling Test of a Hot Spot on a Vessel’” (1956, Trans. ASME, 78, pp. 1009–1010)
P. N. Randall, H. A. Lang
Trans. ASME. July 1956, 78(5): 1010. doi: https://doi.org/10.1115/1.4013909
View articletitled, Closure to “Discussion of ‘Thermal-Cycling Test of a Hot Spot on a Vessel’” (1956, Trans. ASME, 78, pp. 1009–1010)
Open the PDF for in another window
Discussion: “Some Cases of Stress Due to Temperature Gradient” (Bergman, D. J., 1956, Trans. ASME, 78, pp. 1011–1017)
F. E. Wolosewick
Trans. ASME. July 1956, 78(5): 1017–1019. doi: https://doi.org/10.1115/1.4013911
View articletitled, Discussion: “Some Cases of Stress Due to Temperature Gradient” (Bergman, D. J., 1956, Trans. ASME, 78, pp. 1011–1017)
Open the PDF for in another window
Topics: Stress , Temperature gradient
Closure to “Discussion of ‘Some Cases of Stress Due to Temperature Gradient’” (1956, Trans. ASME, 78, pp. 1017–1019)
D. J. Bergman
Trans. ASME. July 1956, 78(5): 1019. doi: https://doi.org/10.1115/1.4013912
View articletitled, Closure to “Discussion of ‘Some Cases of Stress Due to Temperature Gradient’” (1956, Trans. ASME, 78, pp. 1017–1019)
Open the PDF for in another window
Topics: Stress , Temperature
Discussion: “High-Temperature Stability of Insulating and Refractory Castables in Reducing and Oxidizing Atmospheres” (Vogrin, C. M., and Heep, H., 1956, Trans. ASME, 78, pp. 1021–1028)
J. F. Wygant
Trans. ASME. July 1956, 78(5): 1028–1029. doi: https://doi.org/10.1115/1.4013914
View articletitled, Discussion: “High-Temperature Stability of Insulating and Refractory Castables in Reducing and Oxidizing Atmospheres” (Vogrin, C. M., and Heep, H., 1956, Trans. ASME, 78, pp. 1021–1028)
Open the PDF for in another window
Topics: High temperature , Stability
Closure to “Discussion of ‘High-Temperature Stability of Insulating and Refractory Castables in Reducing and Oxidizing Atmospheres’” (1956, Trans. ASME, 78, pp. 1028–1029)
C. M. Vogrin, H. Heep
Trans. ASME. July 1956, 78(5): 1029. doi: https://doi.org/10.1115/1.4013915
View articletitled, Closure to “Discussion of ‘High-Temperature Stability of Insulating and Refractory Castables in Reducing and Oxidizing Atmospheres’” (1956, Trans. ASME, 78, pp. 1028–1029)
Open the PDF for in another window
Topics: High temperature , Stability
Discussion: “Yield and Bursting Characteristics of Heavy-Wall Cylinders” (Faupel, J. H., 1956, Trans. ASME, 78, pp. 1031–1061)
E. W. Comings
Trans. ASME. July 1956, 78(5): 1062. doi: https://doi.org/10.1115/1.4013917
View articletitled, Discussion: “Yield and Bursting Characteristics of Heavy-Wall Cylinders” (Faupel, J. H., 1956, Trans. ASME, 78, pp. 1031–1061)
Open the PDF for in another window
Topics: Cylinders
Discussion: “Yield and Bursting Characteristics of Heavy-Wall Cylinders” (Faupel, J. H., 1956, Trans. ASME, 78, pp. 1031–1061)
S. M. Jorgensen
Trans. ASME. July 1956, 78(5): 1062. doi: https://doi.org/10.1115/1.4013918
View articletitled, Discussion: “Yield and Bursting Characteristics of Heavy-Wall Cylinders” (Faupel, J. H., 1956, Trans. ASME, 78, pp. 1031–1061)
Open the PDF for in another window
Topics: Cylinders
Closure to “Discussions of ‘Yield and Bursting Characteristics of Heavy-Wall Cylinders’” (1956, Trans. ASME, 78, p. 1062)
J. H. Faupel
Trans. ASME. July 1956, 78(5): 1062–1064. doi: https://doi.org/10.1115/1.4013919
View articletitled, Closure to “Discussions of ‘Yield and Bursting Characteristics of Heavy-Wall Cylinders’” (1956, Trans. ASME, 78, p. 1062)
Open the PDF for in another window
Discussion: “Ebullition Cooling of Gas Engines” (Bates, G. O., English, J. E., and Franklin, G. M., 1956, Trans. ASME, 78, pp. 1065–1069)
Harvey Menard
Trans. ASME. July 1956, 78(5): 1069. doi: https://doi.org/10.1115/1.4013921
View articletitled, Discussion: “Ebullition Cooling of Gas Engines” (Bates, G. O., English, J. E., and Franklin, G. M., 1956, Trans. ASME, 78, pp. 1065–1069)
Open the PDF for in another window
Topics: Cooling , Gas engines
Closure to “Discussion of ‘Ebullition Cooling of Gas Engines’” (1956, Trans. ASME, 78, p. 1069)
G. O. Bates, J. E. English, G. M. Franklin
Trans. ASME. July 1956, 78(5): 1069. doi: https://doi.org/10.1115/1.4013922
View articletitled, Closure to “Discussion of ‘Ebullition Cooling of Gas Engines’” (1956, Trans. ASME, 78, p. 1069)
Open the PDF for in another window
Topics: Cooling
Discussion: “Resistance Coefficients for Accelerated and Decelerated Flows Through Smooth Tubes and Orifices” (Daily, J. W., Hankey, Jr., W. L., Olive, R. W., and Jordaan, Jr., J. M., 1956, Trans. ASME, 78, pp. 1071–1077)
F. S. Weinig
Trans. ASME. July 1956, 78(5): 1077. doi: https://doi.org/10.1115/1.4013924
View articletitled, Discussion: “Resistance Coefficients for Accelerated and Decelerated Flows Through Smooth Tubes and Orifices” (Daily, J. W., Hankey, Jr., W. L., Olive, R. W., and Jordaan, Jr., J. M., 1956, Trans. ASME, 78, pp. 1071–1077)
Open the PDF for in another window
Topics: Flow (Dynamics) , Orifices
Closure to “Discussion of ‘Resistance Coefficients for Accelerated and Decelerated Flows Through Smooth Tubes and Orifices’” (1956, Trans. ASME, 78, p. 1077)
J. W. Daily, W. L. Hankey, Jr., R. W. Olive, J. M. Jordaan, Jr.
Trans. ASME. July 1956, 78(5): 1077. doi: https://doi.org/10.1115/1.4013925
View articletitled, Closure to “Discussion of ‘Resistance Coefficients for Accelerated and Decelerated Flows Through Smooth Tubes and Orifices’” (1956, Trans. ASME, 78, p. 1077)
Open the PDF for in another window
Topics: Flow (Dynamics)
Discussion: “Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe” (Numachi, F., Murai, H., and Abe, S., 1956, Trans. ASME, 78, pp. 1079–1086)
L. J. Hooper
Trans. ASME. July 1956, 78(5): 1087. doi: https://doi.org/10.1115/1.4013927
View articletitled, Discussion: “Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe” (Numachi, F., Murai, H., and Abe, S., 1956, Trans. ASME, 78, pp. 1079–1086)
Open the PDF for in another window
Topics: Flow (Dynamics) , Flowmeters , Pipes , Water
Discussion: “Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe” (Numachi, F., Murai, H., and Abe, S., 1956, Trans. ASME, 78, pp. 1079–1086)
S. L. Kerr
Trans. ASME. July 1956, 78(5): 1087. doi: https://doi.org/10.1115/1.4013928
View articletitled, Discussion: “Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe” (Numachi, F., Murai, H., and Abe, S., 1956, Trans. ASME, 78, pp. 1079–1086)
Open the PDF for in another window
Topics: Flow (Dynamics) , Flowmeters , Pipes , Water
Discussion: “Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe” (Numachi, F., Murai, H., and Abe, S., 1956, Trans. ASME, 78, pp. 1079–1086)
W. J. Rheingans
Trans. ASME. July 1956, 78(5): 1087–1088. doi: https://doi.org/10.1115/1.4013929
View articletitled, Discussion: “Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe” (Numachi, F., Murai, H., and Abe, S., 1956, Trans. ASME, 78, pp. 1079–1086)
Open the PDF for in another window
Topics: Flow (Dynamics) , Flowmeters , Pipes , Water
Discussion: “Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe” (Numachi, F., Murai, H., and Abe, S., 1956, Trans. ASME, 78, pp. 1079–1086)
F. S. Weinig
Trans. ASME. July 1956, 78(5): 1088. doi: https://doi.org/10.1115/1.4013930
View articletitled, Discussion: “Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe” (Numachi, F., Murai, H., and Abe, S., 1956, Trans. ASME, 78, pp. 1079–1086)
Open the PDF for in another window
Topics: Flow (Dynamics) , Flowmeters , Pipes , Water
Closure to “Discussions of ‘Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe’” (1956, Trans. ASME, 78, pp. 1087–1088)
F. Numachi
Trans. ASME. July 1956, 78(5): 1088–1089. doi: https://doi.org/10.1115/1.4013931
View articletitled, Closure to “Discussions of ‘Streamlined Pitot-Tube Bar for Measuring Water Flow in Large Pipe’” (1956, Trans. ASME, 78, pp. 1087–1088)
Open the PDF for in another window
Topics: Flow (Dynamics) , Flowmeters , Water
Discussion: “A Comparison of Regenerative-Pump Theories Supported by New Performance Data” (Senoo, Yasutoshi, 1956, Trans. ASME, 78, pp. 1091–1095)
J. A. Oelrich
Trans. ASME. July 1956, 78(5): 1095–1097. doi: https://doi.org/10.1115/1.4013933
View articletitled, Discussion: “A Comparison of Regenerative-Pump Theories Supported by New Performance Data” (Senoo, Yasutoshi, 1956, Trans. ASME, 78, pp. 1091–1095)
Open the PDF for in another window
Topics: Pumps
Discussion: “A Comparison of Regenerative-Pump Theories Supported by New Performance Data” (Senoo, Yasutoshi, 1956, Trans. ASME, 78, pp. 1091–1095)
J. R. Parker
Trans. ASME. July 1956, 78(5): 1097. doi: https://doi.org/10.1115/1.4013934
View articletitled, Discussion: “A Comparison of Regenerative-Pump Theories Supported by New Performance Data” (Senoo, Yasutoshi, 1956, Trans. ASME, 78, pp. 1091–1095)
Open the PDF for in another window
Topics: Pumps
Discussion: “A Comparison of Regenerative-Pump Theories Supported by New Performance Data” (Senoo, Yasutoshi, 1956, Trans. ASME, 78, pp. 1091–1095)
M. A. Santalo
Trans. ASME. July 1956, 78(5): 1097–1099. doi: https://doi.org/10.1115/1.4013935
View articletitled, Discussion: “A Comparison of Regenerative-Pump Theories Supported by New Performance Data” (Senoo, Yasutoshi, 1956, Trans. ASME, 78, pp. 1091–1095)
Open the PDF for in another window
Topics: Pumps
Discussion: “A Comparison of Regenerative-Pump Theories Supported by New Performance Data” (Senoo, Yasutoshi, 1956, Trans. ASME, 78, pp. 1091–1095)
F. S. Weinig
Trans. ASME. July 1956, 78(5): 1099–1100. doi: https://doi.org/10.1115/1.4013936
View articletitled, Discussion: “A Comparison of Regenerative-Pump Theories Supported by New Performance Data” (Senoo, Yasutoshi, 1956, Trans. ASME, 78, pp. 1091–1095)
Open the PDF for in another window
Topics: Pumps
Discussion: “A Comparison of Regenerative-Pump Theories Supported by New Performance Data” (Senoo, Yasutoshi, 1956, Trans. ASME, 78, pp. 1091–1095)
W. A. Wilson
Trans. ASME. July 1956, 78(5): 1100–1101. doi: https://doi.org/10.1115/1.4013937
View articletitled, Discussion: “A Comparison of Regenerative-Pump Theories Supported by New Performance Data” (Senoo, Yasutoshi, 1956, Trans. ASME, 78, pp. 1091–1095)
Open the PDF for in another window
Topics: Pumps
Closure to “Discussions of ‘A Comparison of Regenerative-Pump Theories Supported by New Performance Data’” (1956, Trans. ASME, 78, pp. 1195–1101)
Yasutoshi Senoo
Trans. ASME. July 1956, 78(5): 1101–1102. doi: https://doi.org/10.1115/1.4013938
View articletitled, Closure to “Discussions of ‘A Comparison of Regenerative-Pump Theories Supported by New Performance Data’” (1956, Trans. ASME, 78, pp. 1195–1101)
Open the PDF for in another window
Topics: Pumps
Discussion: “Process Design of Tubular Heaters” (Mekler, L. A., 1956, Trans. ASME, 78, pp. 1103–1109)
D. J. Bergman
Trans. ASME. July 1956, 78(5): 1109. doi: https://doi.org/10.1115/1.4013940
View articletitled, Discussion: “Process Design of Tubular Heaters” (Mekler, L. A., 1956, Trans. ASME, 78, pp. 1103–1109)
Open the PDF for in another window
Topics: Process design
Discussion: “Process Design of Tubular Heaters” (Mekler, L. A., 1956, Trans. ASME, 78, pp. 1103–1109)
C. K. Mader, R. H. Shoulberg
Trans. ASME. July 1956, 78(5): 1109–1110. doi: https://doi.org/10.1115/1.4013941
View articletitled, Discussion: “Process Design of Tubular Heaters” (Mekler, L. A., 1956, Trans. ASME, 78, pp. 1103–1109)
Open the PDF for in another window
Topics: Process design
Closure to “Discussions of ‘Process Design of Tubular Heaters’” (1956, Trans. ASME, 78, pp. 1109–1110)
L. A. Mekler
Trans. ASME. July 1956, 78(5): 1110–1111. doi: https://doi.org/10.1115/1.4013942
View articletitled, Closure to “Discussions of ‘Process Design of Tubular Heaters’” (1956, Trans. ASME, 78, pp. 1109–1110)
Open the PDF for in another window
Topics: Process design
Discussion: “On the Tool-Life and Temperature Relationship in Metal Cutting” (Ling, F. F., and Saibel, Edward, 1956, Trans. ASME, 78, pp. 1113–1116)
B. T. Chao, K. J. Trigger
Trans. ASME. July 1956, 78(5): 1116–1117. doi: https://doi.org/10.1115/1.4013944
View articletitled, Discussion: “On the Tool-Life and Temperature Relationship in Metal Cutting” (Ling, F. F., and Saibel, Edward, 1956, Trans. ASME, 78, pp. 1113–1116)
Open the PDF for in another window
Topics: Metal cutting , Temperature
Discussion: “On the Tool-Life and Temperature Relationship in Metal Cutting” (Ling, F. F., and Saibel, Edward, 1956, Trans. ASME, 78, pp. 1113–1116)
A. O. Schmidt, B. F. Turkovich, J. R. Roubik
Trans. ASME. July 1956, 78(5): 1117. doi: https://doi.org/10.1115/1.4013945
View articletitled, Discussion: “On the Tool-Life and Temperature Relationship in Metal Cutting” (Ling, F. F., and Saibel, Edward, 1956, Trans. ASME, 78, pp. 1113–1116)
Open the PDF for in another window
Topics: Metal cutting , Temperature
Closure to “Discussions of ‘On the Tool-Life and Temperature Relationship in Metal Cutting’” (1956, Trans. ASME, 78, pp. 1116–1117)
F. F. Ling, Edward Saibel
Trans. ASME. July 1956, 78(5): 1117. doi: https://doi.org/10.1115/1.4013946
View articletitled, Closure to “Discussions of ‘On the Tool-Life and Temperature Relationship in Metal Cutting’” (1956, Trans. ASME, 78, pp. 1116–1117)
Open the PDF for in another window
Topics: Metals , Temperature
Discussion: “The Mechanism of Crater Wear of Cemented Carbide Tools” (Trigger, K. J., and Chao, B. T., 1956, Trans. ASME, 78, pp. 1119–1126)
A. O. Schmidt, J. R. Roubik
Trans. ASME. July 1956, 78(5): 1126. doi: https://doi.org/10.1115/1.4013948
View articletitled, Discussion: “The Mechanism of Crater Wear of Cemented Carbide Tools” (Trigger, K. J., and Chao, B. T., 1956, Trans. ASME, 78, pp. 1119–1126)
Open the PDF for in another window
Topics: Carbide cutting tools , Wear
Closure to “Discussion of ‘The Mechanism of Crater Wear of Cemented Carbide Tools’” (1956, Trans. ASME, 78, p. 1126)
K. J. Trigger, B. T. Chao
Trans. ASME. July 1956, 78(5): 1126. doi: https://doi.org/10.1115/1.4013949
View articletitled, Closure to “Discussion of ‘The Mechanism of Crater Wear of Cemented Carbide Tools’” (1956, Trans. ASME, 78, p. 1126)
Open the PDF for in another window
Topics: Wear
Discussion: “Chatter Vibration of Lathe Tools” (Doi, S., and Kato, S., 1956, Trans. ASME, 78, pp. 1127–1133)
N. H. Cook
Trans. ASME. July 1956, 78(5): 1133. doi: https://doi.org/10.1115/1.4013951
View articletitled, Discussion: “Chatter Vibration of Lathe Tools” (Doi, S., and Kato, S., 1956, Trans. ASME, 78, pp. 1127–1133)
Open the PDF for in another window
Topics: Chatter , Vibration
Discussion: “Chatter Vibration of Lathe Tools” (Doi, S., and Kato, S., 1956, Trans. ASME, 78, pp. 1127–1133)
R. S. Hahn
Trans. ASME. July 1956, 78(5): 1133–1134. doi: https://doi.org/10.1115/1.4013952
View articletitled, Discussion: “Chatter Vibration of Lathe Tools” (Doi, S., and Kato, S., 1956, Trans. ASME, 78, pp. 1127–1133)
Open the PDF for in another window
Topics: Chatter , Vibration
Discussion: “Chatter Vibration of Lathe Tools” (Doi, S., and Kato, S., 1956, Trans. ASME, 78, pp. 1127–1133)
A. O. Schmidt, B. F. Turkovich, J. R. Roubik
Trans. ASME. July 1956, 78(5): 1134. doi: https://doi.org/10.1115/1.4013953
View articletitled, Discussion: “Chatter Vibration of Lathe Tools” (Doi, S., and Kato, S., 1956, Trans. ASME, 78, pp. 1127–1133)
Open the PDF for in another window
Topics: Chatter , Vibration
Discussion: “Chatter Vibration of Lathe Tools” (Doi, S., and Kato, S., 1956, Trans. ASME, 78, pp. 1127–1133)
E. Saljé
Trans. ASME. July 1956, 78(5): 1134. doi: https://doi.org/10.1115/1.4013954
View articletitled, Discussion: “Chatter Vibration of Lathe Tools” (Doi, S., and Kato, S., 1956, Trans. ASME, 78, pp. 1127–1133)
Open the PDF for in another window
Topics: Chatter , Vibration
Closure to “Discussions of ‘Chatter Vibration of Lathe Tools’” (1956, Trans. ASME, 78, pp. 1133–1134)
S. Doi, S. Kato
Trans. ASME. July 1956, 78(5): 1134. doi: https://doi.org/10.1115/1.4013955
View articletitled, Closure to “Discussions of ‘Chatter Vibration of Lathe Tools’” (1956, Trans. ASME, 78, pp. 1133–1134)
Open the PDF for in another window
Topics: Chatter , Vibration
Discussion: “Hydraulic-Turbine Runner Vibration” (Donaldson, R. M., 1956, Trans. ASME, 78, pp. 1141–1144)
D. C. Hazen, C. P. Kittredge
Trans. ASME. July 1956, 78(5): 1144. doi: https://doi.org/10.1115/1.4013958
View articletitled, Discussion: “Hydraulic-Turbine Runner Vibration” (Donaldson, R. M., 1956, Trans. ASME, 78, pp. 1141–1144)
Open the PDF for in another window
Topics: Hydraulic turbines , Vibration
Discussion: “Hydraulic-Turbine Runner Vibration” (Donaldson, R. M., 1956, Trans. ASME, 78, pp. 1141–1144)
F. E. Jaski
Trans. ASME. July 1956, 78(5): 1144–1145. doi: https://doi.org/10.1115/1.4013959
View articletitled, Discussion: “Hydraulic-Turbine Runner Vibration” (Donaldson, R. M., 1956, Trans. ASME, 78, pp. 1141–1144)
Open the PDF for in another window
Topics: Hydraulic turbines , Vibration
Discussion: “Hydraulic-Turbine Runner Vibration” (Donaldson, R. M., 1956, Trans. ASME, 78, pp. 1141–1144)
G. D. Johnson
Trans. ASME. July 1956, 78(5): 1145–1146. doi: https://doi.org/10.1115/1.4013960
View articletitled, Discussion: “Hydraulic-Turbine Runner Vibration” (Donaldson, R. M., 1956, Trans. ASME, 78, pp. 1141–1144)
Open the PDF for in another window
Topics: Hydraulic turbines , Vibration
Discussion: “Hydraulic-Turbine Runner Vibration” (Donaldson, R. M., 1956, Trans. ASME, 78, pp. 1141–1144)
W. J. Rheingans
Trans. ASME. July 1956, 78(5): 1146. doi: https://doi.org/10.1115/1.4013961
View articletitled, Discussion: “Hydraulic-Turbine Runner Vibration” (Donaldson, R. M., 1956, Trans. ASME, 78, pp. 1141–1144)
Open the PDF for in another window
Topics: Hydraulic turbines , Vibration
Discussion: “Hydraulic-Turbine Runner Vibration” (Donaldson, R. M., 1956, Trans. ASME, 78, pp. 1141–1144)
G. J. Vencill
Trans. ASME. July 1956, 78(5): 1146. doi: https://doi.org/10.1115/1.4013962
View articletitled, Discussion: “Hydraulic-Turbine Runner Vibration” (Donaldson, R. M., 1956, Trans. ASME, 78, pp. 1141–1144)
Open the PDF for in another window
Topics: Hydraulic turbines , Vibration
Closure to “Discussions of ‘Hydraulic-Turbine Runner Vibration’” (1956, Trans. ASME, 78, pp. 1144–1146)
R. M. Donaldson
Trans. ASME. July 1956, 78(5): 1147. doi: https://doi.org/10.1115/1.4013963
View articletitled, Closure to “Discussions of ‘Hydraulic-Turbine Runner Vibration’” (1956, Trans. ASME, 78, pp. 1144–1146)
Open the PDF for in another window
Topics: Hydraulic turbines
All Issues
Simulation of Interfacial Waves in Core-Annular Pipe Flow with a Turbulent Annulus
J. Fluids Eng
Study of The Flow Characteristics of Pumped Media in The Confined Morphology of A Ferrofluid Pump with Annular Microscale Constraints
J. Fluids Eng
On Using the Distributor as a Multi Degree- of-Freedom System to Mitigate the Pressure Pulsation in an Axial Turbine at Speed-No-Load
J. Fluids Eng
Unified, Integral Approach to Modeling and Design of High-Pressure Pipelines: Assessment of Various Flow and Temperature Models for Supercritical Fluids
J. Fluids Eng
Erratum: “Passively Enhanced Vortex-Induced Vibration Response of Side-by-Side Cylinders in Turbulent Flow” [ASME J. Fluids Eng., 2024, 146(7), p. 070903; DOI: 10.1115/1.4065302]
J. Fluids Eng
  • Online ISSN 1528-901X
  • Print ISSN 0098-2202

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2024 The American Society of Mechanical Engineers
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept