Skip Nav Destination
Issues
April 1955
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Visualization Studies of Secondary Flows With Applications to Turbomachines
Trans. ASME. April 1955, 77(3): 249–262.
doi: https://doi.org/10.1115/1.4014311
Topics:
Flow (Dynamics)
,
Turbomachinery
,
Visualization
,
Boundary layers
,
Theoretical analysis
The Use of Additives for the Prevention of Low-Temperature Corrosion in Oil-Fired Steam-Generating Units
Trans. ASME. April 1955, 77(3): 267–274.
doi: https://doi.org/10.1115/1.4014319
Topics:
Corrosion
,
Low temperature
,
Steam
,
Design
,
Combustion gases
,
Economics
,
Sulfur
,
Water vapor
Influence of Fine Particles on Corrosion of Economizer and Air-Preheater Surfaces by Flue Gases
Trans. ASME. April 1955, 77(3): 279–285.
doi: https://doi.org/10.1115/1.4014326
Topics:
Corrosion
,
Flue gases
,
Particulate matter
,
Sulfur
,
Temperature
,
Condensation
,
Catalysts
,
Fuels
,
Iron
,
Optical microscopes
Applying Bearing Theory to the Analysis and Design of Pad-Type Bearings
Trans. ASME. April 1955, 77(3): 287–309.
doi: https://doi.org/10.1115/1.4014331
Topics:
Bearings
,
Design
,
Bearing design
,
Thrust bearings
The Hydrodynamic Pocket Bearing
Trans. ASME. April 1955, 77(3): 311–318.
doi: https://doi.org/10.1115/1.4014332
Topics:
Bearings
,
Design
,
External pressure
,
Flow (Dynamics)
,
Journal bearings
,
Machinery
,
Reliability
,
Thrust
,
Thrust bearings
The Influence of Surface Profile on the Load Capacity of Thrust Bearings With Centrally Pivoted Pads
Trans. ASME. April 1955, 77(3): 321–328.
doi: https://doi.org/10.1115/1.4014334
Topics:
Stress
,
Thrust bearings
,
Density
,
Viscosity
The Mechanics of the Simple Shearing Process During Orthogonal Machining
Trans. ASME. April 1955, 77(3): 331–336.
doi: https://doi.org/10.1115/1.4014339
Topics:
Die cutting
,
Machining
,
Friction
,
Deformation
,
Machinery
,
Shear (Mechanics)
,
Stress concentration
Turbine-Blade Vibration and Strength
Trans. ASME. April 1955, 77(3): 337–340.
doi: https://doi.org/10.1115/1.4014340
Topics:
Turbine blades
,
Vibration
,
Blades
,
Design
,
Turbines
,
Annulus
,
Flow (Dynamics)
,
Steam
Manpower and Other Factors Affecting Operating Costs in Steam Generating Stations
Trans. ASME. April 1955, 77(3): 343–353.
doi: https://doi.org/10.1115/1.4014343
Topics:
Power stations
,
Steam
,
Temperature
,
Design
,
Economic analysis
,
Economics
,
Plant design
,
Pressure
,
Thermal efficiency
Consolidated Edison Looks at the Manpower Situation
Trans. ASME. April 1955, 77(3): 353–354.
doi: https://doi.org/10.1115/1.4014344
Topics:
Construction
,
Design
,
Public utilities
Planning for Efficient Use of Manpower
Trans. ASME. April 1955, 77(3): 354–358.
doi: https://doi.org/10.1115/1.4014345
Topics:
Power stations
,
Steam
Maintenance and Effect on Manpower and Power-Production Costs
Trans. ASME. April 1955, 77(3): 359.
doi: https://doi.org/10.1115/1.4014346
Topics:
Energy generation
,
Maintenance
,
Power stations
,
Engineers
,
Steam
The Economics of Large Reheat Turbine-Exhaust-End Size Selection
Trans. ASME. April 1955, 77(3): 363–371.
doi: https://doi.org/10.1115/1.4014352
Topics:
Economics
,
Exhaust systems
,
Turbines
,
Annulus
,
Condensers (steam plant)
,
Economic analysis
,
Heat
,
Steam
Economic Determination of Condenser and Turbine-Exhaust Sizes
Trans. ASME. April 1955, 77(3): 373–381.
doi: https://doi.org/10.1115/1.4014355
Topics:
Condensers (steam plant)
,
Economics
,
Exhaust systems
,
Turbines
,
Annulus
,
Engineers
,
Steam
Effect of Viscosity of Car-Journal Oils on Running Temperature and Other Characteristics of Journal-Bearing Performance
Trans. ASME. April 1955, 77(3): 385–389.
doi: https://doi.org/10.1115/1.4014360
Topics:
Journal bearings
,
Oils
,
Petroleum
,
Temperature
,
Viscosity
,
Bearings
,
Metals
,
Failure
,
Heat
,
Lubrication
Separation of Immiscible Liquids by Means of Porous Membranes
Trans. ASME. April 1955, 77(3): 393–400.
doi: https://doi.org/10.1115/1.4014365
Topics:
Membranes
,
Separation (Technology)
,
Gases
,
Process industries
,
Design
,
Diffusion (Physics)
,
Filtration
,
Fluids
,
Porous materials
,
Surface tension
Discussions and Closures
Discussion: “Visualization Studies of Secondary Flows With Applications to Turbomachines” (Herzig, H. Z., and Hansen, A. G., 1955, Trans. ASME, 77, pp. 249–262)
Trans. ASME. April 1955, 77(3): 262–263.
doi: https://doi.org/10.1115/1.4014313
Topics:
Flow (Dynamics)
,
Turbomachinery
,
Visualization
Discussion: “Visualization Studies of Secondary Flows With Applications to Turbomachines” (Herzig, H. Z., and Hansen, A. G., 1955, Trans. ASME, 77, pp. 249–262)
Trans. ASME. April 1955, 77(3): 263–264.
doi: https://doi.org/10.1115/1.4014315
Topics:
Flow (Dynamics)
,
Turbomachinery
,
Visualization
Discussion: “Visualization Studies of Secondary Flows With Applications to Turbomachines” (Herzig, H. Z., and Hansen, A. G., 1955, Trans. ASME, 77, pp. 249–262)
Trans. ASME. April 1955, 77(3): 264–265.
doi: https://doi.org/10.1115/1.4014316
Topics:
Flow (Dynamics)
,
Turbomachinery
,
Visualization
Closure to “Discussions of ‘Visualization Studies of Secondary Flows With Applications to Turbomachines’” (1955, Trans. ASME, 77, pp. 262–265)
Trans. ASME. April 1955, 77(3): 265–266.
doi: https://doi.org/10.1115/1.4014318
Topics:
Flow (Dynamics)
,
Visualization
Discussion: “The Use of Additives for the Prevention of Low-Temperature Corrosion in Oil-Fired Steam-Generating Units” (Huge, E. C., and Piotter, E. C., 1955, Trans. ASME, 77, pp. 267–274)
Trans. ASME. April 1955, 77(3): 274.
doi: https://doi.org/10.1115/1.4014320
Topics:
Corrosion
,
Low temperature
,
Steam
Discussion: “The Use of Additives for the Prevention of Low-Temperature Corrosion in Oil-Fired Steam-Generating Units” (Huge, E. C., and Piotter, E. C., 1955, Trans. ASME, 77, pp. 267–274)
Trans. ASME. April 1955, 77(3): 275–276.
doi: https://doi.org/10.1115/1.4014321
Topics:
Corrosion
,
Low temperature
,
Steam
Discussion: “The Use of Additives for the Prevention of Low-Temperature Corrosion in Oil-Fired Steam-Generating Units” (Huge, E. C., and Piotter, E. C., 1955, Trans. ASME, 77, pp. 267–274)
Trans. ASME. April 1955, 77(3): 276.
doi: https://doi.org/10.1115/1.4014322
Topics:
Corrosion
,
Low temperature
,
Steam
Discussion: “The Use of Additives for the Prevention of Low-Temperature Corrosion in Oil-Fired Steam-Generating Units” (Huge, E. C., and Piotter, E. C., 1955, Trans. ASME, 77, pp. 267–274)
Trans. ASME. April 1955, 77(3): 276–277.
doi: https://doi.org/10.1115/1.4014323
Topics:
Corrosion
,
Low temperature
,
Steam
Discussion: “The Use of Additives for the Prevention of Low-Temperature Corrosion in Oil-Fired Steam-Generating Units” (Huge, E. C., and Piotter, E. C., 1955, Trans. ASME, 77, pp. 267–274)
Trans. ASME. April 1955, 77(3): 277.
doi: https://doi.org/10.1115/1.4014324
Topics:
Corrosion
,
Low temperature
,
Steam
Closure to “Discussions of ‘The Use of Additives for the Prevention of Low-Temperature Corrosion in Oil-Fired Steam-Generating Units’” (1955, Trans. ASME, 77, pp. 274–277)
Trans. ASME. April 1955, 77(3): 277–278.
doi: https://doi.org/10.1115/1.4014325
Topics:
Corrosion
,
Low temperature
,
Steam
Discussion: “Influence of Fine Particles on Corrosion of Economizer and Air-Preheater Surfaces by Flue Gases” (Hodson, Peter, 1955, Trans. ASME, 77, pp. 279–285)
Trans. ASME. April 1955, 77(3): 285.
doi: https://doi.org/10.1115/1.4014327
Topics:
Corrosion
,
Flue gases
,
Particulate matter
Discussion: “Influence of Fine Particles on Corrosion of Economizer and Air-Preheater Surfaces by Flue Gases” (Hodson, Peter, 1955, Trans. ASME, 77, pp. 279–285)
Trans. ASME. April 1955, 77(3): 285.
doi: https://doi.org/10.1115/1.4014328
Topics:
Corrosion
,
Flue gases
,
Particulate matter
Discussion: “Influence of Fine Particles on Corrosion of Economizer and Air-Preheater Surfaces by Flue Gases” (Hodson, Peter, 1955, Trans. ASME, 77, pp. 279–285)
Trans. ASME. April 1955, 77(3): 285–286.
doi: https://doi.org/10.1115/1.4014329
Topics:
Corrosion
,
Flue gases
,
Particulate matter
Closure to “Discussions of ‘Influence of Fine Particles on Corrosion of Economizer and Air-Preheater Surfaces by Flue Gases’” (1955, Trans. ASME, 77, pp. 285–286)
Trans. ASME. April 1955, 77(3): 286.
doi: https://doi.org/10.1115/1.4014330
Topics:
Corrosion
,
Flues
,
Particulate matter
Discussion: “The Hydrodynamic Pocket Bearing” (Wilcock, Donald F., 1955, Trans. ASME, 77, pp. 311–318)
Trans. ASME. April 1955, 77(3): 319.
doi: https://doi.org/10.1115/1.4014333
Topics:
Bearings
Discussion: “Turbine-Blade Vibration and Strength” (Trumpler, Jr., W. E., and Owens, H. M., 1955, Trans. ASME, 77, pp. 337–340)
Trans. ASME. April 1955, 77(3): 340–341.
doi: https://doi.org/10.1115/1.4014341
Topics:
Turbine blades
,
Vibration
Closure to “Discussion of ‘Turbine-Blade Vibration and Strength’” (1955, Trans. ASME, 77, pp. 340–341)
Trans. ASME. April 1955, 77(3): 341.
doi: https://doi.org/10.1115/1.4014342
Topics:
Turbine blades
,
Vibration
Discussion: “Manpower and Other Factors Affecting Operating Costs in Steam Generating Stations” (Estcourt, V. F., 1955, Trans. ASME, 77, pp. 343–353)
Trans. ASME. April 1955, 77(3): 360.
doi: https://doi.org/10.1115/1.4014348
Topics:
Power stations
,
Steam
Discussion: “Manpower and Other Factors Affecting Operating Costs in Steam Generating Stations” (Estcourt, V. F., 1955, Trans. ASME, 77, pp. 343–353)
Trans. ASME. April 1955, 77(3): 361.
doi: https://doi.org/10.1115/1.4014349
Topics:
Power stations
,
Steam
Discussion: “Manpower and Other Factors Affecting Operating Costs in Steam Generating Stations” (Estcourt, V. F., 1955, Trans. ASME, 77, pp. 343–353)
Trans. ASME. April 1955, 77(3): 361.
doi: https://doi.org/10.1115/1.4014350
Topics:
Power stations
,
Steam
Closure to “Discussions of ‘Manpower and Other Factors Affecting Operating Costs in Steam Generating Stations’” (1955, Trans. ASME, 77, pp. 360–361)
Trans. ASME. April 1955, 77(3): 361–362.
doi: https://doi.org/10.1115/1.4014351
Topics:
Steam
Discussion: “The Economics of Large Reheat Turbine-Exhaust-End Size Selection” (Morgan, Jr., D. W. R., and Fulton, S. D., 1955, Trans. ASME, 77, pp. 363–371)
Trans. ASME. April 1955, 77(3): 371.
doi: https://doi.org/10.1115/1.4014353
Topics:
Economics
,
Exhaust systems
,
Turbines
Closure to “Discussion of ‘The Economics of Large Reheat Turbine-Exhaust-End Size Selection’” (1955, Trans. ASME, 77, p. 371)
Trans. ASME. April 1955, 77(3): 371.
doi: https://doi.org/10.1115/1.4014354
Topics:
Economics
,
Exhaust systems
,
Turbines
Discussion: “Economic Determination of Condenser and Turbine-Exhaust Sizes” (Miller, E. H., and Sidun, A., 1955, Trans. ASME, 77, pp. 373–381)
Trans. ASME. April 1955, 77(3): 381.
doi: https://doi.org/10.1115/1.4014356
Topics:
Condensers (steam plant)
,
Economics
,
Exhaust systems
,
Turbines
Discussion: “Economic Determination of Condenser and Turbine-Exhaust Sizes” (Miller, E. H., and Sidun, A., 1955, Trans. ASME, 77, pp. 373–381)
Trans. ASME. April 1955, 77(3): 381–382.
doi: https://doi.org/10.1115/1.4014357
Topics:
Condensers (steam plant)
,
Economics
,
Exhaust systems
,
Turbines
Discussion: “Economic Determination of Condenser and Turbine-Exhaust Sizes” (Miller, E. H., and Sidun, A., 1955, Trans. ASME, 77, pp. 373–381)
Trans. ASME. April 1955, 77(3): 382.
doi: https://doi.org/10.1115/1.4014358
Topics:
Condensers (steam plant)
,
Economics
,
Exhaust systems
,
Turbines
Closure to “Discussions of ‘Economic Determination of Condenser and Turbine-Exhaust Sizes’” (1955, Trans. ASME, 77, pp. 381–382)
Trans. ASME. April 1955, 77(3): 383.
doi: https://doi.org/10.1115/1.4014359
Topics:
Condensers (steam plant)
,
Economics
,
Exhaust systems
,
Turbines
Discussion: “Effect of Viscosity of Car-Journal Oils on Running Temperature and Other Characteristics of Journal-Bearing Performance” (Keller, W. M., 1955, Trans. ASME, 77, pp. 385–389)
Trans. ASME. April 1955, 77(3): 389.
doi: https://doi.org/10.1115/1.4014361
Topics:
Journal bearings
,
Oils
,
Petroleum
,
Temperature
,
Viscosity
Discussion: “Effect of Viscosity of Car-Journal Oils on Running Temperature and Other Characteristics of Journal-Bearing Performance” (Keller, W. M., 1955, Trans. ASME, 77, pp. 385–389)
Trans. ASME. April 1955, 77(3): 389–390.
doi: https://doi.org/10.1115/1.4014362
Topics:
Journal bearings
,
Oils
,
Petroleum
,
Temperature
,
Viscosity
Discussion: “Effect of Viscosity of Car-Journal Oils on Running Temperature and Other Characteristics of Journal-Bearing Performance” (Keller, W. M., 1955, Trans. ASME, 77, pp. 385–389)
Trans. ASME. April 1955, 77(3): 390–391.
doi: https://doi.org/10.1115/1.4014363
Topics:
Journal bearings
,
Oils
,
Petroleum
,
Temperature
,
Viscosity
Closure to “Discussions of ‘Effect of Viscosity of Car-Journal Oils on Running Temperature and Other Characteristics of Journal-Bearing Performance’” (1955, Trans. ASME, 77, pp. 389–391)
Trans. ASME. April 1955, 77(3): 391.
doi: https://doi.org/10.1115/1.4014364
Topics:
Journal bearings
,
Oils
,
Petroleum
,
Temperature
,
Viscosity
Email alerts
RSS Feeds
Enhancement of the Thermodynamic Suppression Effect of Cavitation in a Hydrofoil With a Slit
J. Fluids Eng (September 2025)
