The paper illustrates the results of an experimental campaign conducted in the Cavitating Pump Rotordynamic Test Facility at ALTA S.p.A., aimed at characterizing the rotordynamic forces acting on a whirling four-bladed, tapered-hub, variable-pitch inducer, designated as DAPAMITO4. The roles of the imposed whirl motion of the rotor, flow coefficient, cavitation number and liquid temperature have been investigated. A novel experimental technique, consisting in measuring the continuous spectra of the forces as functions of the whirl ratio, has been developed and validated. This technique gives the possibility of extracting valuable information from the experiments by clearly identifying the qualitative and quantitative behavior of the forces, and is therefore useful to catch the unlikely foreseeable complexity of the rotordynamic forces and their consequences on the stability of axial inducers.

References

1.
Ehrich
,
F.
, and
Childs
,
S. D.
, 1984, “
Self-Excited Vibrations in High Performance Turbomachinery
,”
Mech. Eng.
,
106
(
5
), pp.
66
79
.
2.
Hergt
,
P.
, and
Krieger
,
P.
, 1969, “
Radial Forces in Centrifugal Pumps with Guide Vanes
,”
Proc. Inst. Mech. Eng.
,
184
, pp.
101
107
.
3.
Ohashi
,
H.
, and
Shoji
,
H.
, 1984, “
Lateral Fluid Forces Acting on a Whirling Centrifugal Impeller in Vaneless and Vaned Diffuser
,”
Proc. Workshop on Rotordynamic Instability Problems in High Performance Turbomachinery
, NASA Conf. Publ. No. 2338, pp.
109
122
.
4.
Jery
,
B.
, 1987, “
Experimental Study of Unsteady Hydrodynamic Force Matrices on Whirling Centrifugal Pump Impellers
,” California Institute of Technology, Pasadena, CA, Report No. 200.22.
5.
Franz
,
R. J.
, 1989, “
Experimental Investigation of the Effect of Cavitation on the Rotordynamic Forces on a Whirling Centrifugal Pump Impeller
,” Ph.D. thesis, California Institute of Technology, Pasadena, CA.
6.
Yoshida
,
Y.
Tsujimoto
,
Y.
Morimoto
,
G.
Nishida
,
H.
Morii
,
S.
, 2003, “
Effects of Seal Geometry on Dynamic Impeller Fluid Forces and Moments
,”
ASME J. Fluids Eng.
,
125
, pp.
786
795
.
7.
Suzuki
,
T.
,
Prunieres
,
R.
,
Horiguchi
,
H.
,
Tsukiya
,
T.
,
Taenaka
,
Y.
, and
Tsujimoto
,
Y.
, 2006, “
Measurements of Rotordynamic Forces on an Artificial Heart Pump Impeller
,”
Proc. 23rd IAHR Symposium
, Yokohama, Japan.
8.
Bhattacharyya
,
A.
, 1994, “
Internal Flows and Force Matrices in Axial Flow Inducers
,” Ph.D. thesis, California Institute of Technology, Pasadena, CA, Report No. E249.18.
9.
Bhattacharyya
,
A.
,
Acosta
,
A. J.
,
Brennen
,
C. E.
, and
Caughey
,
T. K.
, 1997, “
Rotordynamic Forces in Cavitating Inducers
,”
ASME J. Fluids Eng.
199
(
4
), pp.
768
774
.
10.
Rapposelli
,
E.
,
Cervone
,
A.
, and
d’Agostino
,
L.
, 2002, “
A New Cavitating Pump Rotordynamic Test Facility
,”
Proc. 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference
,
Indianapolis, IN
, AIAA Paper No. 2002-4285.
11.
Torre
,
L.
,
Pasini
,
A.
,
Cervone
,
A.
,
Pecorari
,
L.
,
Milani
,
A.
, and
d’Agostino
,
L.
, 2010, “
Rotordynamic Forces on a Three Bladed Inducer
,”
Proc. Space Propulsion Conference
,
San Sebastian, Spain
.
12.
Pasini
,
A.
,
Torre
,
L.
,
Cervone
,
A.
, and
d’Agostino
,
L.
, 2010, “
Rotordynamic Forces on a Four Bladed Inducer
,”
Proc. 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference
,
Nashville, TN
.
13.
d’Agostino
,
L.
,
Torre
,
L.
,
Pasini
,
A.
, and
Cervone
,
A.
, 2008, “
On the Preliminary Design and Noncavitating Performance of Tapered Axial Inducers
,”
ASME J. Fluids Eng.
130
(
11
), p.
111303
.
14.
d’Agostino
,
L.
,
Torre
,
L.
,
Pasini
,
A.
,
Baccarella
,
D.
,
Cervone
,
A.
, and
Milani
,
A.
, 2008, “
A Reduced Order Model for Preliminary Design and Performance Prediction of Tapered Inducers: Comparison with Numerical Simulations
,”
Proc. 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference
,
Hartford, CT
.
You do not currently have access to this content.