In this paper, we present our recent experimental results on buoyancy-induced convection in aluminum metal foams of different pore densities [corresponding to 5, 10, 20, and 40 pores per in. (PPI)] and porosities (0.89–0.96). The results show that compared to a heated surface, the heat transfer coefficients in these heat sinks are five to six times higher. However, when compared to commercially available heat sinks of similar dimensions, the enhancement is found to be marginal. The experimental results also show that for a given pore size, the heat transfer rate increases with porosity, suggesting the dominant role played by conduction in enhancing heat transfer. On the other hand, if the porosity is held constant, the heat transfer rate is found to be lower at higher pore densities. This can be attributed to the higher permeability with the larger pores, which allows higher entrainment of air through the porous medium. New empirical correlations are proposed for the estimation of Nusselt number in terms of Rayleigh and Darcy numbers. We also report our results on novel finned metal foam heat sinks in natural convection. Experiments were conducted on aluminum foams of 90% porosity with 5 and 20 PPI with one, two, and four aluminum fins inserted in the foam. All of these heat sinks were fabricated in-house. The results show that the finned metal foam heat sinks are superior in thermal performance compared to the normal metal foam and conventional finned heat sinks. The heat transfer increases with an increase in the number of fins. However, the relative enhancement is found to decrease with each additional fin. The indication is that there exists an optimum number of fins beyond which the enhancement in heat transfer, due to increased surface area, is offset by the retarding effect of overlapping thermal boundary layers. Similar to normal metal foams, the 5 PPI samples are found to give higher values of compared to the 20 PPI samples due to higher permeability of the porous medium. Future work is planned to arrive at the optimal heat sink configuration for even larger enhancement in heat transfer.
Skip Nav Destination
Article navigation
September 2006
Research Papers
Metal Foam and Finned Metal Foam Heat Sinks for Electronics Cooling in Buoyancy-Induced Convection
A. Bhattacharya,
A. Bhattacharya
Assistant Professor
Mechanical Engineering Department,
Indian Institute of Technology
, Bombay, Powai, Mumbai 400076, India
Search for other works by this author on:
R. L. Mahajan
R. L. Mahajan
Professor
Mechanical Engineering Department,
University of Colorado
, Campus Box 427, Boulder, CO 80309-0427
Search for other works by this author on:
A. Bhattacharya
Assistant Professor
Mechanical Engineering Department,
Indian Institute of Technology
, Bombay, Powai, Mumbai 400076, India
R. L. Mahajan
Professor
Mechanical Engineering Department,
University of Colorado
, Campus Box 427, Boulder, CO 80309-0427J. Electron. Packag. Sep 2006, 128(3): 259-266 (8 pages)
Published Online: September 23, 2005
Article history
Received:
May 25, 2005
Revised:
September 23, 2005
Citation
Bhattacharya, A., and Mahajan, R. L. (September 23, 2005). "Metal Foam and Finned Metal Foam Heat Sinks for Electronics Cooling in Buoyancy-Induced Convection." ASME. J. Electron. Packag. September 2006; 128(3): 259–266. https://doi.org/10.1115/1.2229225
Download citation file:
Get Email Alerts
Anand Model Constants of Sn-Ag-Cu Solders: What Do They Actually Mean?
J. Electron. Packag
Enhancing Mechanical Reliability of Silver-Sintered Joints With Copper Nanowires in High-Power Electronic Devices
J. Electron. Packag (December 2024)
Special Issue on InterPACK2023
J. Electron. Packag (December 2024)
Related Articles
The Effect of Thermal Contact Resistance at Porous-Solid Interfaces in Finned Metal Foam Heat Sinks
J. Electron. Packag (December,2010)
Height Effect on Heat-Transfer Characteristics of Aluminum-Foam Heat Sinks
J. Heat Transfer (June,2006)
Heat Transfer Analysis in Metal Foams With Low-Conductivity Fluids
J. Heat Transfer (August,2006)
Developing Nonthermal-Equilibrium Convection in Porous Media With Negligible Fluid Conduction
J. Heat Transfer (January,2009)
Related Proceedings Papers
Related Chapters
When Is a Heat Sink Not a Heat Sink?
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong
Too Much of a Good Thing
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong
Heat Transfer Enhancement for Thermal Energy Storage Using Metal Foams Embedded within Phase Change Materials (PCMS)
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)