In this study, the diffusion behavior and microstructural evolution of Cu-Sn intermetallics at eutectic Sn-Pb solder/copper substrate interface of PBGA solder joints was studied. The PBGA solder joints were formed by different profiles, which was devised to have the same “heating factor”—the integral of the measured temperature above the liquidus (183°C) with respect to dwell time in the reflow profile, but to have different conveyor speeds. Using the theory of heat transmission, it is shown that the solder joint cooling rate during solidification increases with increasing conveyor speed. As a result, the “crystallization degree” of the solder joint microstructure decreased with the increasing of cooling rate. The thickness of IMC layer increased with extension of aging time. The growth of IMC is a diffusion-controlled process, i.e., tin diffuses into copper, and the diffusion coefficient in the “disordered region” is much bigger than that in the “crystallization region” so the IMC growth rate of solder joint with faster cooling rate was larger. On the other hand, although at all temperatures, the difference increases as temperature decrease, consequently, the difference of IMC thickness growth among different cooling rate solder joints varied according to the aging temperature.
Skip Nav Destination
e-mail: eeycchan@cityu.edu.hk
e-mail: shfan@ee.cityu.edu.hk
Article navigation
March 2003
Technical Briefs
The Effect of Cooling Rate on the Growth of Cu-Sn Intermetallics in Annealed PBGA Solder Joints
Y. C. Chan,
e-mail: eeycchan@cityu.edu.hk
Y. C. Chan
Department of Electronic Engineering, City University of Hong Kong, Kowloon, Hong Kong
Search for other works by this author on:
S. H. Fan,
e-mail: shfan@ee.cityu.edu.hk
S. H. Fan
Department of Electronic Engineering, City University of Hong Kong, Kowloon, Hong Kong
Search for other works by this author on:
J. K. L. Lai
J. K. L. Lai
Department of Physics and Materials Science, City University of Hong Kong, Kowloon, Hong Kong
Search for other works by this author on:
Y. C. Chan
Department of Electronic Engineering, City University of Hong Kong, Kowloon, Hong Kong
e-mail: eeycchan@cityu.edu.hk
S. H. Fan
Department of Electronic Engineering, City University of Hong Kong, Kowloon, Hong Kong
e-mail: shfan@ee.cityu.edu.hk
J. K. L. Lai
Department of Physics and Materials Science, City University of Hong Kong, Kowloon, Hong Kong
Contributed by the Electronic and Photonic Packaging Division for publication in the Journal of Electronic Packaging. Manuscript received by the EPPD Division, March 19, 2002. Associate Editor: Y.-H. Pao.
J. Electron. Packag. Mar 2003, 125(1): 153-156 (4 pages)
Published Online: March 14, 2003
Article history
Received:
March 19, 2002
Online:
March 14, 2003
Citation
Chan , Y. C., Fan , S. H., and Lai , J. K. L. (March 14, 2003). "The Effect of Cooling Rate on the Growth of Cu-Sn Intermetallics in Annealed PBGA Solder Joints ." ASME. J. Electron. Packag. March 2003; 125(1): 153–156. https://doi.org/10.1115/1.1537070
Download citation file:
Get Email Alerts
Cited By
Sequential Versus Concurrent Effects in Combined Stress Solder Joint Reliability
J. Electron. Packag
Anand Model Constants of Sn-Ag-Cu Solders: What Do They Actually Mean?
J. Electron. Packag
Related Articles
Fatigue Lifetimes of PBGA Solder Joints Reflowed at Different Conveyor Speeds
J. Electron. Packag (September,2001)
Low Cycle Fatigue Testing of Ball Grid Array Solder Joints under Mixed-Mode Loading Conditions
J. Electron. Packag (September,2005)
Influence of Intermetallic Characteristics on the Solder Joint Strength of Halogen-Free Printed Circuit Board Assembly
J. Electron. Packag (June,2011)
Heat Transfer and Phase Transformations in Laser Annealing of Thin Si Films
J. Heat Transfer (April,2002)
Related Proceedings Papers
Related Chapters
Modeling and Optimal Control for Batch Cooling Crystallization
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)
Processing/Structure/Properties Relationships in Polymer Blends for the Development of Functional Polymer Foams
Advances in Multidisciplinary Engineering
Numerical Study on Dynamic Charging Performance of Packed Bed Using Spherical Capsules Containing N-Tetradecane
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)