The growing application of advanced electronic packages under harsh environmental conditions, extreme temperatures especially in automotive applications is often a reason for damage, fatigue, and failure of entire components and systems. Consequently, their thermo-mechanical reliability is one of the most important preconditions for adopting these technologies in industrial applications. To prevent chips from being exposed to the external environment integrated circuits are usually encapsulated into packages. As a result, a microelectronic package is basically a compound of several materials with quite different Young’s moduli and thermal expansion coefficients. Additionally, various kinds of inhomogeneity, residual stresses from several steps of the manufacturing process contribute to interface delaminations, chip cracking, and fatigue of solder interconnects. This paper intends to investigate mixed mode interface delamination phenomena in micro components by using combined numerical investigations by means of nonlinear FEA and experimental investigations. It explains how experimental data were used as input for the quantitative evaluation of fatigue and fracture of microcomponents. Both numerical and experimental investigations provide the basis for understanding and evaluating failure mechanisms especially in solder joints, as well as several polymer material interfaces, and should support further applications for raising the thermo-mechanical reliability of advanced electronic packages.
Skip Nav Destination
Article navigation
December 2002
Technical Papers
Delamination Risk Evaluation for Plastic Packages Based on Mixed Mode Fracture Mechanics Approaches
J. Auersperg,
J. Auersperg
AMIC Angewandte Micro-Messtechnik GmbH, 12489 Berlin, Germany
Fraunhofer Institute IZM, Department of Mechanical Reliability and MicroMaterials, D-13355 Berlin, Germany
Search for other works by this author on:
E. Kieselstein,
E. Kieselstein
CWM Chemnitzer Wekstoffmechanik GmbH, D-09117 Chemnitz, Germany
Search for other works by this author on:
A. Schubert,
A. Schubert
Fraunhofer Institute IZM, Department of Mechanical Reliability and MicroMaterials, D-13355 Berlin, Germany
Search for other works by this author on:
B. Michel
B. Michel
Fraunhofer Institute IZM, Department of Mechanical Reliability and MicroMaterials, D-13355 Berlin, Germany
Search for other works by this author on:
J. Auersperg
AMIC Angewandte Micro-Messtechnik GmbH, 12489 Berlin, Germany
Fraunhofer Institute IZM, Department of Mechanical Reliability and MicroMaterials, D-13355 Berlin, Germany
E. Kieselstein
CWM Chemnitzer Wekstoffmechanik GmbH, D-09117 Chemnitz, Germany
A. Schubert
Fraunhofer Institute IZM, Department of Mechanical Reliability and MicroMaterials, D-13355 Berlin, Germany
B. Michel
Fraunhofer Institute IZM, Department of Mechanical Reliability and MicroMaterials, D-13355 Berlin, Germany
Contributed by the Electronic and Photonic Packaging Division and presented at Poly 2000, London, United Kingdom, December 4–5, 2000. Manuscript received at ASME Headquarters, May 2002. Guest Editor: Bernd Michel.
J. Electron. Packag. Dec 2002, 124(4): 318-322 (5 pages)
Published Online: December 12, 2002
Article history
Received:
May 1, 2002
Online:
December 12, 2002
Citation
Auersperg, J., Kieselstein, E., Schubert , A., and Michel , B. (December 12, 2002). "Delamination Risk Evaluation for Plastic Packages Based on Mixed Mode Fracture Mechanics Approaches ." ASME. J. Electron. Packag. December 2002; 124(4): 318–322. https://doi.org/10.1115/1.1501303
Download citation file:
Get Email Alerts
Enhancing Mechanical Reliability of Silver-Sintered Joints With Copper Nanowires in High-Power Electronic Devices
J. Electron. Packag (December 2024)
Special Issue on InterPACK2023
J. Electron. Packag (December 2024)
Impact of Encapsulated Phase Change Material Additives for Improved Thermal Performance of Silicone Gel Insulation
J. Electron. Packag (December 2024)
Related Articles
Fracture Mechanics Analysis of Low Cost Solder Bumped Flip Chip Assemblies With Imperfect Underfills
J. Electron. Packag (December,2000)
Specimen Design for Mixed Mode Interfacial Fracture Properties Measurement in Electronic Packages
J. Electron. Packag (March,2000)
Interfacial Delamination Near Solder Bumps and UBM in Flip-Chip Packages
J. Electron. Packag (September,2001)
Finite Element Analysis of Stress Singularities in Attached Flip Chip Packages
J. Electron. Packag (December,2000)
Related Proceedings Papers
Related Chapters
Applications of Elastic-Plastic Fracture Mechanics in Section XI, ASME Code Evaluations
Online Companion Guide to the ASME Boiler & Pressure Vessel Codes
A Fracture Mechanics Method for an Advanced Evaluation of Inclusions and the Prediction of Fatigue Life of Rolling Element Bearings
Bearing and Transmission Steels Technology
Subsection NB—Class 1 Components
Companion Guide to the ASME Boiler and Pressure Vessel Code, Volume 1, Fourth Edition