This paper proposes a technique to model uncertainties associated with linear time-invariant systems. It is assumed that the uncertainties are only due to parametric variations caused by independent uncertain variables. By assuming that a set of a finite number of rational transfer functions of a fixed order is given, as well as the number of independent uncertain variables that affect the parametric uncertainties, the proposed technique seeks an optimal parametric uncertainty model as a function of uncertain variables that explains the set of transfer functions. Finding such an optimal parametric uncertainty model is formulated as a noncovex optimization problem, which is then solved by a combination of a linear matrix inequality and a nonlinear optimization technique. To find an initial condition for solving this nonconvex problem, the nonlinear principal component analysis based on the multidimensional principal curve is employed. The effectiveness of the proposed technique is verified through both illustrative and practical examples.
Skip Nav Destination
e-mail: sepasi@mech.ubc.ca
e-mail: sassani@mech.ubc.ca
e-mail: nagamune@mech.ubc.ca
Article navigation
September 2010
Technical Briefs
Parameter Uncertainty Modeling Using the Multidimensional Principal Curves
M. Sepasi,
M. Sepasi
Department of Mechanical Engineering,
e-mail: sepasi@mech.ubc.ca
University of British Columbia
, Vancouver, V6T 1Z4, BC, Canada
Search for other works by this author on:
F. Sassani,
F. Sassani
Department of Mechanical Engineering,
e-mail: sassani@mech.ubc.ca
University of British Columbia
, Vancouver, V6T 1Z4, BC, Canada
Search for other works by this author on:
R. Nagamune
R. Nagamune
Department of Mechanical Engineering,
e-mail: nagamune@mech.ubc.ca
University of British Columbia
, Vancouver, V6T 1Z4, BC, Canada
Search for other works by this author on:
M. Sepasi
Department of Mechanical Engineering,
University of British Columbia
, Vancouver, V6T 1Z4, BC, Canadae-mail: sepasi@mech.ubc.ca
F. Sassani
Department of Mechanical Engineering,
University of British Columbia
, Vancouver, V6T 1Z4, BC, Canadae-mail: sassani@mech.ubc.ca
R. Nagamune
Department of Mechanical Engineering,
University of British Columbia
, Vancouver, V6T 1Z4, BC, Canadae-mail: nagamune@mech.ubc.ca
J. Dyn. Sys., Meas., Control. Sep 2010, 132(5): 054501 (7 pages)
Published Online: August 11, 2010
Article history
Received:
March 16, 2009
Revised:
April 21, 2010
Online:
August 11, 2010
Published:
August 11, 2010
Citation
Sepasi, M., Sassani, F., and Nagamune, R. (August 11, 2010). "Parameter Uncertainty Modeling Using the Multidimensional Principal Curves." ASME. J. Dyn. Sys., Meas., Control. September 2010; 132(5): 054501. https://doi.org/10.1115/1.4001791
Download citation file:
Get Email Alerts
Cited By
Offline and online exergy-based strategies for hybrid electric vehicles
J. Dyn. Sys., Meas., Control
Optimal Control of a Roll-to-Roll Dry Transfer Process With Bounded Dynamics Convexification
J. Dyn. Sys., Meas., Control (May 2025)
In-Situ Calibration of Six-Axis Force/Torque Transducers on a Six-Legged Robot
J. Dyn. Sys., Meas., Control (May 2025)
Active Data-enabled Robot Learning of Elastic Workpiece Interactions
J. Dyn. Sys., Meas., Control
Related Articles
Parameter Reduction in Estimated Model Sets for Robust Control
J. Dyn. Sys., Meas., Control (March,2010)
Template Generation Algorithm Using Vectorized Function Evaluations and Adaptive Subdivisions
J. Dyn. Sys., Meas., Control (December,2002)
Multivariable Robust Control of a Simulated Hybrid Solid Oxide Fuel Cell Gas Turbine Plant
J. Fuel Cell Sci. Technol (August,2010)
Graph-Based Modeling of Nonhomogeneous One-Dimensional Multibody Systems With Arbitrary Topology
J. Comput. Nonlinear Dynam (July,2011)
Related Chapters
QRAS Approach to Phased Mission Analysis (PSAM-0444)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)
Comparing Probabilistic Graphical Model Based and Gaussian Process Based Selections for Predicting the Temporal Observations
Intelligent Engineering Systems through Artificial Neural Networks, Volume 20
Manufacture/Remanufacture Closed-Loop Supply Chain Network Optimization Model and Algorithm under Uncertainty
International Symposium on Information Engineering and Electronic Commerce, 3rd (IEEC 2011)