Control can enable high-bandwidth nanopositioning needed to increase the operating speed of scanning probe microscopes (SPMs). High-speed SPMs can substantially impact the throughput of a wide range of emerging nanosciences and nanotechnologies. In particular, inversion-based control can find the feedforward input needed to account for the positioning dynamics and, thus, achieve the required precision and bandwidth. This article reviews inversion-based feedforward approaches used for high-speed SPMs such as optimal inversion that accounts for model uncertainty and inversion-based iterative control for repetitive applications. The article establishes connections to other existing methods such as zero-phase-error-tracking feedforward and robust feedforward. Additionally, the article reviews the use of feedforward in emerging applications such as SPM-based nanoscale combinatorial-science studies, image-based control for subnanometer-scale studies, and imaging of large soft biosamples with SPMs.
1.
Binnig
, G.
, and Rohrer
, H.
, 1982, “Scanning Tunneling Microscopy
,” Helv. Phys. Acta
0018-0238, 55
, pp. 726
–735
.2.
Binnig
, G.
, Quate
, C. F.
, and Gerber
, C.
, 1986, “Atomic Force Microscope
,” Phys. Rev. Lett.
0031-9007, 56
(9
), pp. 930
–933
.3.
1994,
Scanning Probe Microscopy and Spectroscopy
, R.
Wiesendanger
, ed., Cambridge University Press
, Cambridge
.4.
Vettiger
, P.
, Staufer
, U.
, and Kern
, D. P.
, 1996, “Special Issue on Nanotechnology–Preface
,” Microelectron. Eng.
0167-9317, 31
, pp. 1
–2
.5.
Gentili
, M.
, Giovannella
, C.
, and Selci
, S.
, eds. 1993, “Nanolithography: A Borderland Between STM, EB, IB and X-Ray Lithographies
,” NATO ASI Series E: Applied Science
, Vol. 264
, Kluwer Academic Publishers
.6.
Whitesides
, G. M.
, and Love
, H. C.
, 2001, “The Art of Building Small
,” Sci. Am.
0036-8733, 285
(3
), pp. 39
–47
.7.
Kalinin
, S. V.
, and Bonnell
, D. A.
, 2000, “Effect of Phase Transition on the Surface Potential of the BaTiO3
,” J. Appl. Phys.
0021-8979, 87
(8
), pp. 3950
–3957
.8.
Leang
, K. K.
, and Devasia
, S.
, 2006, “Design of Hysteresis-Compensating Iterative Learning Control: Application to Atomic Force Microscopes
,” Mechatronics
0957-4158, 16
(3–4
), pp. 141
–158
.9.
Bashash
, S.
, and Jalili
, N.
, 2008, “A Polynomial-Based Linear Mapping Strategy for Feedforward Compensation of Hysteresis in Piezoelectric Actuators
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 130
(3
), p. 031008
.10.
Barrett
, R. C.
, and Quate
, C. F.
, 1991, “Optical Scan-Correction System Applied to Atomic Force Microscopy
,” Rev. Sci. Instrum.
0034-6748, 62
(6
), pp. 1393
–1399
.11.
Devasia
, S.
, Eleftheriou
, E.
, and Moheimani
, S. O. R.
, 2007, “A Survey of Control Issues in Nanopositioning
,” IEEE Trans. Control Syst. Technol.
1063-6536, 15
(5
), pp. 802
–823
.12.
Croft
, D.
, and Devasia
, S.
, 1999, “Vibration Compensation for High Speed Scanning Tunneling Microscopy
,” Rev. Sci. Instrum.
0034-6748, 70
(12
), pp. 4600
–4605
.13.
Alexander
, S.
, Hellemans
, L.
, Marti
, O.
, Schneir
, J.
, Elings
, V.
, Hansma
, P. K.
, Longmire
, M.
, and Gurley
, J.
, 1989, “An Atomic-Resolution Atomic-Force Microscope Implemented Using an Optical Lever
,” J. Appl. Phys.
0021-8979, 65
(1
), pp. 164
–167
.14.
Pearce
, R.
, and Vancso
, G. J.
, 1998, “Real-Time Imaging of Melting and Crystallization in Poly(Ethylene Oxide) by Atomic Force Microscopy
,” Polymer
0032-3861, 39
(5
), pp. 1237
–1242
.15.
Li
, L.
, Chan
, C. -M.
, Yeung
, K. L.
, Li
, J. -X.
, Ng
, K. -M.
, and Lei
, Y.
, 2001, “Direct Observation of Growth of Lamellae and Spherulites of a Semicrystalline Polymer by AFM
,” Macromolecules
0024-9297, 34
(2
), pp. 316
–325
.16.
Beekmans
, L. G. M.
, van der Meer
, D. W.
, and Vancso
, G. J.
, 2002, “Crystal Melting and Its Kinetics on Poly(Ethylene Oxide) by In Situ Atomic Force Microscopy
,” Polymer
0032-3861, 43
(6
), pp. 1887
–1895
.17.
Evans
, E.
, and Ritchie
, K.
, 1997, “Dynamic Strength of Molecular Adhesion Bonds
,” Biophys. J.
0006-3495, 72
(4
), pp. 1541
–1555
.18.
Stipe
, B. C.
, Rezaei
, M. A.
, and Ho
, W.
, 1998, “Single-Molecule Vibrational Spectroscopy
,” Science
0036-8075, 280
, pp. 1732
–1735
.19.
Wilder
, K.
, Soh
, H. T.
, Atalar
, A.
, and Quate
, C. F.
, 1999, “Nanometer-Scale Patterning and Individual Current Controlled Lithography Using Multiple Scanning Probes
,” Rev. Sci. Instrum.
0034-6748, 70
, pp. 2822
–2827
.20.
Minne
, S. C.
, Yaraliuglu
, G.
, Manalis
, S. R.
, Adams
, J. D.
, Zesch
, J.
, Atalar
, A.
, and Quate
, C. F.
, 1998, “Automated Parallel High-Speed Atomic Force Microscopy
,” Appl. Phys. Lett.
0003-6951, 72
(18
), pp. 2340
–2342
.21.
Lozanne
, A. L. D.
, Smith
, W. F.
, and Ehrichs
, E. E.
, 1993, “Direct Writing With a Combined STM/SEM System
,” Proceedings of NATO Advanced Workshop on Nanolithography: A Borderland between STM, EB, IB, and X-ray Lithographies
, NATO ASI Series E, Applied Science
, Vol. 264
, pp. 159
–174
.22.
Aizenberg
, J.
, Black
, A. J.
, and Whitesides
, G. M.
, 1999, “Control of Crystal Nucleation by Patterned Self-Assembled Monolayers
,” Nature (London)
0028-0836, 398
, pp. 495
–498
.23.
Coffey
, D. C.
, and Ginger
, D. S.
, 2005, “Patterning Phase Separation in Polymer Films With Dip-Pen Nanolithography
,” J. Am. Chem. Soc.
0002-7863, 127
, pp. 4564
–4565
.24.
Chung
, S. W.
, Ginger
, D. S.
, Morales
, M.
, Zhang
, Z.
, Chandrasekhar
, V.
, Ratner
, M. A.
, and Mirkin
, C. A.
, 2005, “Top-Down Meets Bottom-Up: Dip-Pen Nanolithography and DNA-Directed Assembly of Nanoscale Electrical Circuits
,” Small
1613-6810, 1
, pp. 64
–69
.25.
Park
, C.
, Yoon
, J.
, and Thomas
, E. L.
, 2003, “Enabling Nanotechnology With Self Assembled Block Copolymer Patterns
,” Polymer
0032-3861, 44
(22
), pp. 6725
–6760
.26.
Stark
, R. W.
, Schitter
, G.
, and Stemmer
, A.
, 2004, “Velocity Dependent Friction Laws in Contact Mode Atomic Force Microscopy
,” Ultramicroscopy
0304-3991, 100
(3–4
), pp. 309
–317
.27.
Tien
, S.
, Zou
, Q.
, and Devasia
, S.
, 2005, “Iterative Control of Dynamics-Coupling-Caused Errors in Piezoscanners During High-Speed AFM Operation
,” IEEE Trans. Control Syst. Technol.
1063-6536, 13
(6
), pp. 921
–931
.28.
Avouris
, P.
, Hertel
, T.
, and Martel
, R.
, 1997, “Atomic Force Microscope Tip-Induced Local Oxidation of Silicon: Kinetics, Mechanism, and Nanofabrication
,” Appl. Phys. Lett.
0003-6951, 71
, pp. 285
–287
.29.
Dubois
, E.
, and Bubendorff
, J. L.
, 2000, “Kinetics of Scanned Probe Oxidation: Space-Charge Limited Growth
,” J. Appl. Phys.
0021-8979, 87
(11
), pp. 8148
–8154
.30.
Croft
, D.
, Shedd
, G.
, and Devasia
, S.
, 2001, “Creep, Hysteresis, and Vibration Compensation for Piezoactuators: Atomic Force Microscopy Application
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 123
(1
), pp. 35
–43
.31.
Clayton
, G. M.
, Tien
, S.
, Fleming
, A. J.
, Moheimani
, S. O. R.
, and Devasia
, S.
, 2008, “Inverse Feedforward of Charge Controlled Piezopositioners
,” Mechatronics
0957-4158, 18
(5–6
), pp. 273
–281
.32.
Ashhab
, M.
, Salapaka
, M.
, Dahleh
, M.
, and Mezic
, I.
, 1999, “Melnikov-Based Dynamical Analysis of Microcantilevers in Scanning Probe Microscopy
,” Nonlinear Dyn.
0924-090X, 20
(3
), pp. 197
–220
.33.
El Rifai
, O. M.
, and Youcef-Toumi
, K.
, 2001, “In-Contact Dynamics of Atomic Force Microscopes
,” Proceedings of the 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics
, Jul. 8–12, Vol. 2
, pp. 1325
–1328
.34.
Basak
, S.
, Raman
, A.
, and Garimella
, S. V.
, 2006, “Hydrodynamic Loading of Microcantilevers Vibrating in Viscous Fluids
,” J. Appl. Phys.
0021-8979, 99
, p. 114906
.35.
El Rifai
, O. M.
, and Youcef-Toumi
, K.
, 2001, “Coupling in Piezoelectric Tube Scanners Used in Scanning Probe Microscopes
,” Proceedings of the 2001 American Control Conference
, Arlington, VA, Jun. 25–27, Vol. 4
, pp. 3251
–3255
.36.
Salapaka
, S.
, De
, T.
, and Sebastian
, A.
, 2005, “Sample-Profile Estimate for Fast Atomic Force Microscopy
,” Appl. Phys. Lett.
0003-6951, 87
(5
), p. 053112
.37.
Shegaonkar
, A. C.
, and Salapaka
, S. M.
, 2007, “Feedback Based Simultaneous Correction of Imaging Artifacts Due to Geometrical and Mechanical Cross-Talk and Tip-Sample Stick in Atomic Force Microscopy
,” Rev. Sci. Instrum.
0034-6748, 78
, p. 103706
.38.
Li
, Y.
, and Bechhoefer
, J.
, 2007, “Feedforward Control of a Closed-Loop Piezoelectric Translation Stage for Atomic Force Microscope
,” Rev. Sci. Instrum.
0034-6748, 78
(1
), pp. 013702
.39.
Barrett
, R. C.
, and Quate
, C. F.
, 1991, “High-Speed, Large-Scale Imaging With the Atomic Force Microscope
,” J. Vac. Sci. Technol. B
1071-1023, 9
(2
), pp. 302
–306
.40.
Kuipers
, L.
, Loos
, R. W. M.
, Neerings
, H.
, ter Horst
, J.
, Ruwiel
, G. J.
, de Jongh
, A. P.
, and Frenken
, J. W. M.
, 1995, “Design and Performance of a High Temperature, High-Speed Scanning Tunneling Microscope
,” Rev. Sci. Instrum.
0034-6748, 66
(9
), pp. 4557
–4565
.41.
Nakakura
, C. Y.
, Phanse
, V. M.
, Zheng
, G.
, Bannon
, G.
, Altman
, E. I.
, and Lee
, K. P.
, 1998, “A High-Speed Variable-Temperature Ultrahigh Vacuum Scanning Tunneling Microscope
,” Rev. Sci. Instrum.
0034-6748, 69
(9
), pp. 3251
–3258
.42.
Schitter
, G.
, Aström
, K. J.
, DeMartini
, B. E.
, Thurner
, P. J.
, Turner
, K. L.
, and Hansma
, P. K.
, 2007, “Design and Modeling of a High-Speed AFM-Scanner
,” IEEE Trans. Control Syst. Technol.
1063-6536, 15
(5
), pp. 906
–915
.43.
Ando
, T.
, Kodera
, N.
, Takai
, E.
, Maruyama
, D.
, Saito
, K.
, and Toda
, A.
, 2001, “A High-Speed Atomic Force Microscope for Studying Biological Macromolecules
,” Proc. Natl. Acad. Sci. U.S.A.
0027-8424, 98
(22
), pp. 12468
–12472
.44.
Rost
, M. J.
, Crama
, L.
, Schakel
, P.
, Tol
, E. V.
, Velzen-Williams
, G. B. E. M. V.
, Overgauw
, C. F.
, Horst
, H. T.
, Dekker
, H.
, Okhuijsen
, B.
, Seynen
, M.
, Vijftigschild
, A.
, Han
, P.
, Katan
, A. J.
, Schoots
, K.
, Schumm
, R.
, Loo
, W. V.
, Oosterkamp
, T. H.
, and Frenken
, J. W. M.
, 2005, “Scanning Probe Microscopes Go Video Rate and Beyond
,” Rev. Sci. Instrum.
0034-6748, 76
(5
), p. 053710
.45.
Shao
, Z.
, Mou
, J.
, Czajkowsky
, D. M.
, Yang
, J.
, and Yuan
, J. -Y.
, 1996, “Biological Atomic Force Microscopy: What Is Achieved and What Is Needed
,” Adv. Phys.
0001-8732, 45
(1
), pp. 1
–86
.46.
Viani
, M. B.
, Schaffer
, T. E.
, Chand
, A.
, Rief
, M.
, Gaub
, H. E.
, and Hansma
, P. K.
, 1999, “Small Cantilevers for Force Spectroscopy of Single Molecules
,” J. Appl. Phys.
0021-8979, 86
(4
), pp. 2258
–2262
.47.
Viani
, M. B.
, Schäffer
, T. E.
, Paloczi
, G. T.
, Pietrasanta
, L. I.
, Smith
, B. L.
, Thompson
, J. B.
, Rief
, M.
, Gaub
, H. E.
, Plaxco
, K. W.
, Cleland
, A. N.
, Hansma
, H. G.
, and Hansma
, P. K.
, 1999, “Fast Imaging and Fast Force Spectroscopy of Single Biopolymers With a New Atomic Force Microscope Designed for Small Cantilever
,” Rev. Sci. Instrum.
0034-6748, 70
(11
), pp. 4300
–4303
.48.
Koops
, R.
, and Sawatzky
, G. A.
, 1992, “New Scanning Device for Scanning Tunneling Microscope Applications
,” Rev. Sci. Instrum.
0034-6748, 63
(8
), pp. 4008
–4009
.49.
Sulchek
, T.
, Hsieh
, R.
, Adams
, J. D.
, Minne
, S. C.
, Quate
, C. F.
, and Adderton
, D. M.
, 2000, “High-Speed Atomic Force Microscopy in Liquid
,” Rev. Sci. Instrum.
0034-6748, 71
(5
), pp. 2097
–2099
.50.
Chen
, C. J.
, 1992, “Electromechanical Deflections of Piezoelectric Tubes With Quartered Electrodes
,” Appl. Phys. Lett.
0003-6951, 60
(1
), pp. 132
–134
.51.
Humphris
, A.
, Miles
, M.
, and Hobbs
, J.
, Jan, 2005, “A Mechanical Microscope: High-Speed Atomic Force Microscopy
,” Appl. Phys. Lett.
0003-6951, 86
(3
), p. 034106
.52.
Picco
, L. M.
, Bozec
, L.
, Ulcinas
, A.
, Engledew
, D. J.
, Antognozzi
, M.
, Horton
, M. A.
, and Miles
, M. J.
, 2007, “Breaking the Speed Limit With Atomic Force Microscopy
,” Nanotechnology
0957-4484, 18
(4
), p. 044030
.53.
Uchihashi
, T.
, Ando
, T.
, and Yamashita
, H.
, 2006, “Fast Phase Imaging in Liquids Using a Rapid Scan Atomic Force Microscope
,” Appl. Phys. Lett.
0003-6951, 89
(21
), pp. 213112
.54.
De Cupere
, V. M.
, Wetter
, J. V.
, and Rouxhet
, P. G.
, 2003, “Nanoscale Organization of Collagen and Mixed Collagen-Pluronic Adsorbed Layers
,” Langmuir
0743-7463, 19
, pp. 6957
–6967
.55.
Jiao
, Y.
, and Schäffer
, T. E.
, 2004, “Accurate Height and Volume Measurements on Soft Samples With the Atomic Force Microscope
,” Langmuir
0743-7463, 20
, pp. 10038
–10045
.56.
Dong
, H.
, Wanyun
, M.
, Fulong
, L.
, Meiling
, Y.
, Zhigang
, O.
, and Yunxu
, S.
, 2003, “Time-Series Observation of the Spreading Out of Microvessel Endothelial Cells With Atomic Force Microscopy
,” Phys. Med. Biol.
0031-9155, 48
, pp. 3897
–3909
.57.
Ushiki
, T.
, Yamamoto
, S.
, Hitomi
, J.
, Ogura
, S.
, Umemoto
, T.
, and Shigeno
, M.
, 2000, “Atomic Force Microscopy of Living Cells
,” Jpn. J. Appl. Phys., Part 1
0021-4922, 39
(6B
), pp. 3761
–3764
.58.
Salapaka
, S.
, Sebastian
, A.
, Cleveland
, J. P.
, and Salapaka
, M. V.
, 2002, “High Bandwidth Nano-Positioner: A Robust Control Approach
,” Rev. Sci. Instrum.
0034-6748, 73
(9
), pp. 3232
–3241
.59.
Ando
, Y.
, Ikehara
, T.
, and Matsumoto
, S.
, 2007, “Development of Three-Dimensional Microstages Using Inclined Deep-Reactive Ion Etching
,” J. Microelectromech. Syst.
1057-7157, 16
(3
), pp. 613
–621
.60.
Leang
, K. K.
, and Fleming
, A. J.
, 2008, “High-Speed Serial-Kinematic AFM Scanner: Design and Drive Considerations
,” Proceedings of the American Control Conference
, Seattle, WA, Jun. 11–13, pp. 3188
–3193
.61.
Li
, Y.
, and Bechhoefer
, J.
, 2008, “Feedforward Control of a Piezoelectric Flexure Stage for AFM
,” Proceedings of the American Control Conference
, Seattle, WA, Jun. 11–13, pp. 2703
–2709
.62.
Yong
, Y. K.
, Aphale
, S. S.
, and Reza Moheimani
, S. O.
, 2009, “Design, Identification, and Control of a Flexure-Based xy Stage for Fast Nanoscale Positioning
,” IEEE Trans. Nanotechnol.
1536-125X, 8
(1
), pp. 46
–54
.63.
Schitter
, G.
, Thurner
, P. J.
, and Hansma
, P. K.
, 2008, “Design and Input-Shaping Control of a Novel Scanner for High-Speed Atomic Force Microscopy
,” Mechatronics
0957-4158, 18
(5–6
), pp. 282
–288
.64.
Perez
, H.
, Zou
, Q.
, and Devasia
, S.
, 2004, “Design and Control of Optimal Scan-Trajectories: Scanning Tunneling Microscope Example
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 126
(1
), pp. 187
–197
.65.
Fleming
, A. J.
, and Wills
, A.
, 2008, “Optimal Input Signals for Bandlimited Scanning Systems
,” Proceedings of the 17th IFAC World Congress
, Seoul, Korea, Jul. 6–11, pp. 11805
–11810
.66.
Mokaberi
, B.
, and Requicha
, A. A. G.
, 2008, “Compensation of Scanner Creep and Hysteresis for AFM Nanomanipulation
,” IEEE Trans. Autom. Sci. Eng.
, 5
(2
), pp. 197
–206
. 1545-595567.
Tan
, X.
, and Iyer
, R. V.
, 2009, “Modeling and Control of Hysteresis
,” IEEE Control Syst. Mag.
0272-1708, 29
, pp. 26
–29
.68.
Okazaki
, Y.
, 1990, “A Micro-Positioning Tool Post Using a Piezoelectric Actuator for Diamond Turning Machines
,” Precis. Eng.
0141-6359, 12
, pp. 151
–156
.69.
Leang
, K.
, and Devasia
, S.
, 2002, “Hysteresis, Creep, and Vibration Compensation for Piezoactuators: Feedback and Feedforward Control
,” Proceedings of the Second IFAC Conference on Mechatronic Systems
, Berkeley, CA, Dec. 9–11, pp. 283
–289
.70.
Comstock
, R.
, 1981, “Charge Control of Piezoelectric Actuators to Reduce Hysteresis Effect
,” U.S. Patent No. 4,263,527.71.
Newcomb
, C. V.
, and Flinn
, I.
, 1982, “Improving the Linearity of Piezoelectric Ceramic Actuators
,” Electron. Lett.
0013-5194, 18
(11
), pp. 442
–444
.72.
Fleming
, A. J.
, and Moheimani
, S. O. R.
, 2005, “A Grounded-Load Charge Amplifier for Reducing Hysteresis in Piezoelectric Tube Scanners
,” Rev. Sci. Instrum.
0034-6748, 76
(7
), p. 073707
.73.
Fleming
, A. J.
, and Leang
, K. K.
, 2008, “Charge Drives for Scanning Probe Microscope Positioning Stages
,” Ultramicroscopy
0304-3991, 108
, pp. 1551
–1557
.74.
Sebastian
, A.
, and Salapaka
, S.
, 2005, “Design Methodologies for Robust Nano-Positioning
,” IEEE Trans. Control Syst. Technol.
1063-6536, 13
(6
), pp. 868
–876
.75.
Tamer
, N.
, and Dahleh
, M. A.
, 1994, “Feedback Control of Piezoelectric Tube Scanners
,” Proceedings of the Control and Decision Conference
, Lake Buena Vista, FL, pp. 1826
–1831
.76.
Daniele
, A.
, Salapaka
, S.
, Salapaka
, M.
, and Dahleh
, M.
, 1999, “Piezoelectric Scanners for Atomic Force Microscopes: Design of Lateral Sensors, Identification and Control
,” Proceedings of the American Control Conference
, San Diego, CA, pp. 253
–257
.77.
Schitter
, G.
, Menold
, P.
, Knapp
, H. F.
, Allgower
, F.
, and Stemmer
, A.
, 2001, “High Performance Feedback for Fast Scanning Atomic Force Microscopy
,” Rev. Sci. Instrum.
0034-6748, 72
(8
), pp. 3320
–3327
.78.
Salapaka
, M. V.
, 2008, “Systems and Control Approaches to Nano-Interrogation: Unraveling New Temporal and Spatial Regimes
,” keynote paper, Invited Session on Dynamics and Control of Micro- and Nanoscale Systems-III, IFAC World Congress
.79.
Salapaka
, S. M.
, and Salapaka
, M. V.
, 2008, “Scanning Probe Microscopy
,” IEEE Control Syst. Mag.
0272-1708, 28
(2
), pp. 65
–83
.80.
Pao
, L. Y.
, Butterworth
, J. A.
, and Abramovitch
, D. Y.
, 2007, “Combined Feedforward/Feedback Control of Atomic Force Microscopes
,” Proceedings of the 2007 American Control Conference
, New York, NY, Jul. 11–13, pp. 3509
–3515
.81.
Butterworth
, J. A.
, Pao
, L. Y.
, and Abramovitch
, D. Y.
, 2008, “A Comparison of Control Architectures for Atomic Force Microscopes
,” Proceedings of the IFAC World Congress
, Seoul, Korea, Jul., pp. 8236
–8250
.82.
Leang
, K. K.
, and Devasia
, S.
, 2007, “Feedback-Linearized Inverse Feedforward for Creep, Hysteresis, and Vibration Compensation in AFM Piezoactuators
,” IEEE Trans. Control Syst. Technol.
1063-6536, 15
(5
), pp. 927
–935
.83.
Aphale
, S. S.
, Devasia
, S.
, and Moheimani
, S. O. R.
, 2008, “High-Bandwidth Control of a Piezoelectric Nanopositioning Stage in the Presence of Plant Uncertainties
,” Nanotechnology
0957-4484, 19
(12
), p. 125503
.84.
Zou
, Q.
, Leang
, K. K.
, Sadoun
, E.
, Reed
, M. J.
, and Devasia
, S.
, 2004, “Control Issues in High-Speed AFM for Biological Applications: Collagen Imaging Example
,” Asian J. Control
, 6
(2
), pp. 164
–178
. 1561-862585.
Zhao
, Y.
, and Jayasuriya
, S.
, 1995, “Feedforward Controllers and Tracking Accuracy in the Presence of Plant Uncertainties
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 117
, pp. 490
–495
.86.
Schitter
, G.
, Stemmer
, A.
, and Allgower
, F.
, 2003, “Robust 2dof-Control of a Piezoelectric Tube Scanner for High-Speed Atomic Force Microscopy
,” Proceedings of the American Control Conference
, Denver, CO, pp. 3720
–3725
.87.
Ying
, W.
, and Zou
, Q.
, 2007, “Robust-Inversion-Based 2DOF-Control Design for Output Tracking: Piezoelectric Actuator Example
,” IEEE Conference on Decision and Controls
, New Orleans, LA, Dec., pp. 2451
–2457
.88.
Morgan Matroc
, I.
, 1997, Guide to Modern Piezoelectric Ceramics
, Rev. 7-91, Morgan Matroc, Inc.
, Bedford, OH
.89.
Isidori
, A.
, 1989, Nonlinear Control Systems: An Introduction
, Springer-Verlag
, Berlin
.90.
Clayton
, G. M.
, and Devasia
, S.
, 2005, “Image-Based Control of Dynamic Effects in Scanning Tunneling Microscopes
,” Nanotechnology
0957-4484, 16
(6
), pp. 809
–818
.91.
Clayton
, G. M.
, and Devasia
, S.
, 2007, “Iterative Image-Based Modeling and Control for Higher Scanning Probe Microscope Performance
,” Rev. Sci. Instrum.
0034-6748, 78
(8
), p. 083704
.92.
Inoue
, T.
, Nakano
, M.
, and Lwai
, S.
, 1981, “High Accuracy Control of a Proton Synchrotron Magnet Power Supply
,” Proceedings of the Eighth IFAC World Congress
, pp. 216
–221
.93.
Tomizuka
, M.
, Tsao
, T. C.
, and Chew
, K. K.
, 1988, “Discrete Time Domain Analysis and Synthesis of Repetitive Controllers
,” Proceedings of the American Control Conference
, pp. 860
–866
.94.
Ghosh
, J.
, and Paden
, B.
, 2000, “Nonlinear Repetitive Control
,” IEEE Trans. Autom. Control
0018-9286, 45
(5
), pp. 949
–954
.95.
Francis
, B.
, and Wonham
, W. M.
, 1976, “The Internal Model Principle of Control Theory
,” Automatica
0005-1098, 12
(5
), pp. 457
–465
.96.
Aridogan
, U.
, Shan
, Y.
, and Leang
, K. K.
, 2008, “Discrete-Time Phase Compensated Repetitive Control for Piezoactuators in Scanning Probe Microscopes
,” Dynamic Systems and Controls Conference
, Ann Harbor, MI, Paper No. DSCC2008-2283, pp. 1325
–1332
.97.
Aridogan
, U.
, Shan
, Y.
, and Leang
, K. K.
, 2009, “Design and Analysis of Discrete-Time Repetitive Control for Scanning Probe Microscopes
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, in press.98.
Silverman
, L. M.
, 1969, “Inversion of Multivariable Linear Systems
,” IEEE Trans. Autom. Control
0018-9286, 14
(3
), pp. 270
–276
.99.
Bayo
, E.
, 1987, “A Finite-Element Approach to Control the End-Point Motion of a Single-Link Flexible Robot
,” J. Rob. Syst.
0741-2223, 4
(1
), pp. 63
–75
.100.
Kwon
, D.
, and Book
, W. J.
, 1994, “A Time-Domain Inverse Dynamic Tracking Control of a Single-Link Flexible Manipulator
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 116
(2
), pp. 193
–200
.101.
Devasia
, S.
, Chen
, D.
, and Paden
, B.
, 1996, “Nonlinear Inversion-Based Output Tracking
,” IEEE Trans. Autom. Control
0018-9286, 41
(7
), pp. 930
–943
.102.
Zou
, Q.
, and Devasia
, S.
, 1999, “Preview-Based Stable-Inversion for Output Tracking
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 121
(4
), pp. 625
–630
.103.
Andersson
, S. B.
, and Park
, J.
, 2005, “Tip Steering for Fast Imaging in AFM
,” Proceedings of the American Control Conference
, Portland, OR, Jun. 8–10, Vol. 4
, pp. 2469
–2474
.104.
Zou
, Q.
, and Devasia
, S.
, 2004, “Preview-Based Optimal Inversion for Output Tracking: Application to Scanning Tunneling Microscopy
,” IEEE Trans. Control Syst. Technol.
1063-6536, 12
(3
), pp. 375
–386
.105.
Tomizuka
, M.
, and Whitney
, D. E.
, 1975, “Optimal Discrete Finite Preview Problems (Why and How Is Future Information Important)
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 109
, pp. 319
–325
.106.
Zou
, Q.
, 2009, “Optimal Preview-Based Stable-Inversion for Output Tracking of Nonminimum-Phase Linear Systems
,” Automatica
0005-1098, 45
(1
), pp. 230
–237
.107.
Qui
, L.
, and Davison
, E. J.
, 1993, “Performance Limitations of Non-Minimum Phase Systems in the Servomechanism Problem
,” Automatica
0005-1098, 29
(March
), pp. 337
–349
.108.
Francis
, B.
, 1977, “The Linear Multivariable Regulator Problem
,” SIAM J. Control Optim.
0363-0129, 15
, pp. 486
–505
.109.
Tomizuka
, M.
, 1987, “Zero Phase Error Tracking Control for Digital Control
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 109
, pp. 65
–68
.110.
Gopalswamy
, S.
, and Hedrick
, J.
, 1993, “Tracking Nonlinear Non-Minimum Phase Systems Using Sliding Control
,” Int. J. Control
0020-7179, 57
(5
), pp. 1141
–1158
.111.
Devasia
, S.
, 2002, “Should Model-Based Inverse Inputs Be Used as Feedforward Under Plant Uncertainty?
,” IEEE Trans. Autom. Control
0018-9286, 47
(11
), pp. 1865
–1871
.112.
Dewey
, J.
, Leang
, K.
, and Devasia
, S.
, 1998, “Experimental and Theoretical Results in Output-Trajectory Redesign for Flexible Structures
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 120
(4
), pp. 456
–461
.113.
Gupta
, N. K.
, 1980, “Frequency Shaped Cost Functionals: Extension of Linear-Quadratic-Gaussian Design Methods
,” J. Guid. Control
0162-3192, 3
(6
), pp. 529
–535
.114.
Brinkerhoff
, R.
, and Devasia
, S.
, 2000, “Output Tracking for Actuator Deficient/Redundant Systems: Multiple Piezoactuator Example
,” J. Guid. Control Dyn.
0731-5090, 23
(2
), pp. 370
–373
.115.
Schitter
, G.
, Stark
, R. W.
, and Stemmer
, A.
, 2004, “Identification and Open-Loop Tracking Control of a Piezoelectric Tube Scanner for High-Speed Scanning-Probe Microscopy
,” IEEE Trans. Control Syst. Technol.
1063-6536, 12
(3
), pp. 449
–454
.116.
Doyle
, J. C.
, Francis
, B. A.
, and Tannenbaum
, A. R.
, 1992, Feedback Control Theory
, Macmillan
, London
.117.
Arimoto
, S.
, Kawamura
, S.
, and Miyazaki
, F.
, 1984, “On the Optimal Stabilization of Nonlinear Systems
,” J. Rob. Syst.
0741-2223, 1
(2
), pp. 123
–140
.118.
Craig
, J. J.
, 1984, “Adaptive Control of Manipulators Through Repeated Trials
,” Proceedings of the American Control Conference
, pp. 1566
–1573
.119.
Moore
, K. L.
, 1993, Iterative Learning Control for Deterministic Systems
, Springer-Verlag
, London
.120.
Ghosh
, J.
, and Paden
, B.
, 2001, “Iterative Learning Control for Nonlinear Nonminimum Phase Plants
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 123
, pp. 21
–30
.121.
Mishra
, S.
, and Tomizuka
, M.
, 2005, “An Optimization-Based Approach for Design of Iterative Learning Controllers With Accelerated Rates of Convergence
,” Proceedings of the 44th IEEE Conference on Decision and Control
, Seville, Spain, Dec. 12–15, Vol. 115
, pp. 2427
–2432
.122.
Bristow
, D.
, and Alleyne
, A.
, 2008, “Monotonic Convergence of Iterative Learning Control for Uncertain Systems Using a Time-Varying Filter
,” IEEE Trans. Autom. Control
0018-9286, 53
(2
), pp. 582
–585
.123.
Tsao
, T.
, and Tomizuka
, M.
, 1987, “Adaptive Zero Phase Error Tracking Algorithm for Digital Control
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 109
(2
), pp. 349
–354
.124.
Ghosh
, J.
, and Paden
, B.
, 2002, “A Pseudo-Inverse Based Iterative Learning Control
,” IEEE Trans. Autom. Control
0018-9286, 47
(5
), pp. 831
–837
.125.
Schitter
, G.
, Stark
, R. W.
, and Stemmer
, A.
, 2004, “Fast Contact-Mode Atomic Force Microscopy on Biological Specimen by Model-Based Control
,” Ultramicroscopy
0304-3991, 100
(3–4
), pp. 253
–257
.126.
Kim
, K. -S.
, and Zou
, Q.
, 2008, “Model-Less Inversion-Based Iterative Control for Output Tracking: Piezo Actuator Example
,” Proceedings of the American Control Conference
, Seattle, WA, Jun. 11–13, pp. 2170
–2715
.127.
Wu
, Y.
, and Zou
, Q.
, 2007, “Iterative Control Approach to Compensate for Both the Hysteresis and the Dynamics Effects of Piezo Actuators
,” IEEE Trans. Control Syst. Technol.
1063-6536, 15
(5
), pp. 936
–944
.128.
Atkeson
, C. G.
, and McIntyre
, J.
, 1986, “Robot Trajectory Learning Through Practice
,” IEEE International Conference on Robotics and Automation
, pp. 1737
–1742
.129.
Ghosh
, J.
, and Paden
, B.
, 1999, “A Pseudo-Inverse Based Iterative Learning Control for Nonlinear Plants With Disturbances
,” IEEE Conference on Decision and Control
, Dec.130.
Iyer
, R.
, Tan
, X.
, and Krishnaprasad
, P.
, 2005, “Approximate Inversion of the Preisach Hysteresis Operator With Application to Control of Smart Actuators
,” IEEE Trans. Autom. Control
0018-9286, 50
(6
), pp. 798
–810
.131.
Ashley
, S. C.
, Aridogan
, U.
, and Leang
, K. K.
, 2008, “Hysteresis Inverse Iterative Learning Control of Piezoactuators in AFM
,” 17th IFAC World Congress
, Seoul, Korea.132.
Kim
, K.
, Lin
, Z.
, Shriotrya
, P.
, Sundararajan
, S.
, and Zou
, Q.
, 2008, “Iterative Control Approach to High-Speed Force-Distance Curve Measurement Using AFM: Time Dependent Response of PDMS
,” Ultramicroscopy
0304-3991, 108
, pp. 911
–920
.133.
Kim
, K.
, Zou
, Q.
, and Su
, C.
, 2008, “A New Approach to Scan-Trajectory Design and Track: AFM Force Measurement Example
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 130
, p. 051005
.134.
Kassel
, D. B.
, 2001, “Combinatorial Chemistry and Mass Spectrometry in the 21st Century Discovery Laboratory
,” Chem. Rev. (Washington, D.C.)
0009-2665, 101
, pp. 255
–267
.135.
Szostak
, J.
, 1997, “Combinatorial Chemistry: Special Thematic Issue
,” Chem. Rev. (Washington, D.C.)
0009-2665, 97
, pp. 347
–509
.136.
Cawse
, J. N.
, 2001, “Experimental Strategies for Combinatorial and High-Throughput Materials Development
,” Acc. Chem. Res.
0001-4842, 34
(3
), pp. 213
–221
.137.
Butt
, H.
, Cappella
, B.
, and Kappl
, M.
, 2005, “Force Measurements With the Atomic Force Microscope: Technique, Interpretation and Applications
,” Surf. Sci. Rep.
0167-5729, 59
, pp. 1
–152
.138.
Xu
, Z.
, Kim
, K.
, Zou
, Q.
, and Shrotriya
, P.
, 2008, “Broadband Measurement of Rate-Dependent Viscoelasticity at Nanoscale Using Scanning Probe Microscope: Poly(Dimethylsiloxane) Example
,” Appl. Phys. Lett.
0003-6951, 93
(13
), p. 133103
.139.
Perez
, H.
, and Devasia
, S.
, 2003, “Optimal Output Transitions for Linear Systems
,” Automatica
0005-1098, 39
(2
), pp. 181
–192
.140.
Iamratanakul
, D.
, and Devasia
, S.
, 2009, “Minimum-Time/Energy, Output Transitions for Dual-Stage Systems
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 131
(2
), p. 024503
.141.
Lehenkari
, P. P.
, Charras
, G. T.
, Nykanen
, A.
, and Horton
, M. A.
, 2000, “Adapting Atomic Force Microscopy for Cell Biology
,” Ultramicroscopy
0304-3991, 82
, pp. 289
–295
.142.
Abraham
, V. C.
, Krishnamurthi
, V.
, Taylor
, D. L.
, and Lanni
, F.
, 1999, “The Actin-Based Nanomachine at the Leading Edge of Migrating Cells
,” Biophys. J.
0006-3495, 77
(3
), pp. 1721
–1732
.143.
Small
, J. V.
, Stradal
, T.
, Vignal
, E.
, and Rottner
, K.
, 2002, “The Lamellipodium: Where Motility Begins
,” Trends Cell Biol.
0962-8924, 12
(3
), pp. 112
–120
.144.
Mathur
, A. B.
, Truskey
, G. A.
, and Reichert
, W. M.
, 2000, “Atomic Force and Total Internal Reflection Fluorescence Microscopy for the Study of Force Transmission in Endothelial Cells
,” Biophys. J.
0006-3495, 78
, pp. 1725
–1735
.145.
Grimellec
, C. L.
, Lesniewska
, E.
, Giocondi
, M. -C.
, Finot
, E.
, Vie
, V.
, and Goudonnet
, J. -P.
, 1998, “Imaging of the Surface of Living Cells by Low-Force Contact-Mode Atomic Force Microscopy
,” Biophys. J.
0006-3495, 75
, pp. 695
–703
.146.
Prater
, C. B.
, Wilson
, M. R.
, Garnaes
, J.
, Massie
, J.
, Elings
, V. B.
, and Hansma
, P. K.
, 1991, “Atomic Force Microscopy of Biological Samples at Low Temperature
,” J. Vac. Sci. Technol. B
1071-1023, 9
(2
), pp. 989
–991
.147.
Schitter
, G.
, Allgöwer
, F.
, and Stemmer
, A.
, 2004, “A New Control Strategy for High-Speed Atomic Force Microscopy
,” Nanotechnology
0957-4484, 15
, pp. 108
–114
.148.
Tien
, S.
, July 2007, “High-Speed Nano-Precision Positioning: Theory and Application to AFM Imaging of Soft Samples
,” Ph.D. thesis, University of Washington, Seattle, WA.149.
Tien
, S.
, and Devasia
, S.
, 2009, “Rapid AFM Imaging of Large Soft Samples in Liquid With Small Forces
,” Asian J. Control
, 11
(2
), pp. 154
–165
. 1561-8625150.
Fraden
, J.
, 1993, AIP Handbook of Modern Sensors: Physics Designs and Applications
, American Institute of Physics
, New York
.151.
Lapshin
, R. V.
, 1998, “Automatic Lateral Calibration of Tunneling Microscope Scanners
,” Rev. Sci. Instrum.
0034-6748, 69
(9
), pp. 3268
–3276
.152.
Lapshin
, R. V.
, 2004, “Feature-Oriented Scanning Methodology for Probe Microscopy and Nanotechnology
,” Nanotechnology
0957-4484, 15
, pp. 1135
–1151
.153.
Cunningham
, M.
, Jenkins
, D.
, Clegg
, W.
, and Bakush
, M.
, 1995, “Active Vibration Control and Actuation of a Small Cantilever for Applications in Scanning Probe Instruments
,” Sens. Actuators, A
0924-4247, 50
(1–2
), pp. 147
–150
.Copyright © 2009
by American Society of Mechanical Engineers
You do not currently have access to this content.
