The starter/alternator technology is considered an easily realizable hybrid electric vehicle (HEV) configuration to achieve significant fuel economy without compromising consumer acceptability. Several examples can be found in production or near-production vehicles, with implementation based on a spark ignition (SI) engine coupled with either a belted starter/alternator (BSA) or an integrated starter/alternator (ISA). One of the many challenges in successfully developing a starter/alternator HEV is to achieve engine start and stop operations with minimum passenger discomfort. This requires control of the electric motor to start and stop the engine quickly and smoothly, without compromising the vehicle noise, vibration, and harshness signature. The issue becomes more critical in the case of diesel hybrids, as the peak compression torque is much larger than in SI engines. This paper documents the results of a research activity focused on the control of the start and stop dynamics of a HEV with a belted starter/alternator. The work was conducted on a production 1.9 l common-rail diesel engine coupled to a 10.6 kW permanent magnet motor. The system is part of a series/parallel HEV powertrain, designed to fit a midsize prototype sport utility vehicle. A preliminary experimental investigation was done to assess the feasibility of the concept and to partially characterize the system. This facilitated the design of a control-oriented nonlinear model of the system dynamics and its validation on the complete HEV hardware. Model-based control techniques were then applied to design a controller for the belted starter/alternator, ensuring quick and smooth engine start operations. The final control design has been implemented on the vehicle. The research outcomes demonstrated that the BSA is effective in starting the diesel engine quickly and with very limited vibration and noise.
Skip Nav Destination
e-mail: canova.1@osu.edu
Article navigation
November 2009
Research Papers
On the Control of Engine Start/Stop Dynamics in a Hybrid Electric Vehicle
Marcello Canova,
Marcello Canova
Center for Automotive Research,
e-mail: canova.1@osu.edu
Ohio State University
, 930 Kinnear Road, Columbus, OH 43212
Search for other works by this author on:
Yann Guezennec,
Yann Guezennec
Center for Automotive Research,
Ohio State University
, 930 Kinnear Road, Columbus, OH 43212
Search for other works by this author on:
Steve Yurkovich
Steve Yurkovich
Center for Automotive Research,
Ohio State University
, 930 Kinnear Road, Columbus, OH 43212
Search for other works by this author on:
Marcello Canova
Center for Automotive Research,
Ohio State University
, 930 Kinnear Road, Columbus, OH 43212e-mail: canova.1@osu.edu
Yann Guezennec
Center for Automotive Research,
Ohio State University
, 930 Kinnear Road, Columbus, OH 43212
Steve Yurkovich
Center for Automotive Research,
Ohio State University
, 930 Kinnear Road, Columbus, OH 43212J. Dyn. Sys., Meas., Control. Nov 2009, 131(6): 061005 (12 pages)
Published Online: November 10, 2009
Article history
Received:
May 5, 2008
Revised:
April 28, 2009
Online:
November 10, 2009
Published:
November 10, 2009
Citation
Canova, M., Guezennec, Y., and Yurkovich, S. (November 10, 2009). "On the Control of Engine Start/Stop Dynamics in a Hybrid Electric Vehicle." ASME. J. Dyn. Sys., Meas., Control. November 2009; 131(6): 061005. https://doi.org/10.1115/1.4000066
Download citation file:
Get Email Alerts
Offline and online exergy-based strategies for hybrid electric vehicles
J. Dyn. Sys., Meas., Control
Optimal Control of a Roll-to-Roll Dry Transfer Process With Bounded Dynamics Convexification
J. Dyn. Sys., Meas., Control (May 2025)
In-Situ Calibration of Six-Axis Force/Torque Transducers on a Six-Legged Robot
J. Dyn. Sys., Meas., Control (May 2025)
Active Data-enabled Robot Learning of Elastic Workpiece Interactions
J. Dyn. Sys., Meas., Control
Related Articles
Diesel Engine Optimization for Electric Hybrid Vehicles
J. Energy Resour. Technol (March,2009)
Examination of Initialization and Geometric Details on the Results of CFD Simulations of Diesel Engines
J. Eng. Gas Turbines Power (April,2011)
Biodiesel Effects on Influencing Parameters of Brake Fuel Conversion Efficiency in a Medium Duty Diesel Engine
J. Eng. Gas Turbines Power (December,2010)
A Predictive Energy Management Strategy for Hybrid Electric Powertrain With a Turbocharged Diesel Engine
J. Dyn. Sys., Meas., Control (June,2018)
Related Proceedings Papers
Related Chapters
Why Do We Avoid Conflict?
Conflict Resolution: Concepts and Practice (The Technical Manager's Survival Guides)
Logarithm Transformation of the Output Response Data for Optimization
Taguchi Methods: Benefits, Impacts, Mathematics, Statistics and Applications
Determination of the Effects of Safflower Biodiesel and Its Blends with Diesel Fuel on Engine Performance and Emissions in a Single Cylinder Diesel Engine
International Conference on Software Technology and Engineering, 3rd (ICSTE 2011)