0
Research Papers

Multistable Cosine-Curved Dome System for Elastic Energy Dissipation

[+] Author and Article Information
Mansour Alturki

Department of Civil and Environmental Engineering,
Michigan State University,
1208 Engineering Building,
East Lansing, MI 48824-1226
e-mail: alturki1@msu.edu

Rigoberto Burgueño

Professor
Department of Civil and Environmental Engineering,
Department of Mechanical Engineering,
Michigan State University,
3574 Engineering Building,
East Lansing, MI 48824-1226
e-mail: burgueno@msu.edu

1Corresponding author.

Contributed by the Applied Mechanics Division of ASME for publication in the Journal of Applied Mechanics. Manuscript received February 14, 2019; final manuscript received May 16, 2019; published online June 10, 2019. Assoc. Editor: Pedro Reis.

J. Appl. Mech 86(9), 091002 (Jun 10, 2019) (10 pages) Paper No: JAM-19-1071; doi: 10.1115/1.4043792 History: Received February 14, 2019; Accepted May 16, 2019

This paper presents a new energy dissipation system composed of multistable cosine-curved domes (CCD) connected in series. The system exhibits multiple consecutive snap-through and snap-back buckling behavior with a hysteretic response. The response of the CCDs is within the elastic regime and hence the system's original configuration is fully recoverable. Numerical studies and experimental tests were conducted on the geometric properties of the individual CCD units and their number in the system to examine the force–displacement and energy dissipation characteristics. Finite element analysis (FEA) was performed to simulate the response of the system to develop a multilinear analytical model for the hysteretic response that considers the nonlinear behavior of the system. The model was used to study the energy dissipation characteristics of the system. Experimental tests on 3D printed specimens were conducted to analyze the system and validate numerical results. Results show that the energy dissipation mainly depends on the number and the apex height-to-thickness ratio of the CCD units. The developed multilinear analytical model yields conservative yet accurate values for the dissipated energy of the system. The proposed system offered reliable high energy dissipation with a maximum loss factor value of 0.14 for a monostable (self-recoverable) system and higher for a bistable system.

Copyright © 2019 by ASME
Your Session has timed out. Please sign back in to continue.

References

Hu, N., and Burgueño, R., 2015, “Buckling-Induced Smart Applications: Recent Advances and Trends,” Smart Mater. Struct., 24(6), pp. 1–20. [CrossRef]
Puglisi, G., and Truskinovsky, L., 2002, “Rate Independent Hysteresis in a Bi-Stable Chain,” J. Mech. Phys. Solids, 50(2), pp. 165–187. [CrossRef]
Bažant, Z. P., and Cedolin, L., 2010, Stability of Structures: Elastic, Inelastic, Fracture and Damage Theories, World Scientific, Singapore.
Shan, S., Kang, S. H., Raney, J. R., Wang, P., Fang, L., Candido, F., Lewis, J. A., and Bertoldi, K., 2015, “Multistable Architected Materials for Trapping Elastic Strain Energy,” Adv. Mater., 27(29), pp. 4296–4301. [CrossRef]
Ha, C. S., Lakes, R. S., and Plesha, M. E., 2018, “Design, Fabrication, and Analysis of Lattice Exhibiting Energy Absorption via Snap-Through Behavior,” Mater. Des., 141, pp. 426–437. [CrossRef]
Chen, T., Mueller, J., and Shea, K., 2016, “Design and Fabrication of a Bistable Unit Actuator With Multi-Material Additive Manufacturing,” Annu. Int. Solid Free. Fabr. Symp., pp. 2060–2076.
Liu, S., Imaniazad, A., and Burgueño, R., 2019, “Architected Materials for Tailorable Shear Behavior With Energy Dissipation,” Extrem. Mech. Lett., 28, pp. 1–7. [CrossRef]
Frenzel, T., Findeisen, C., Kadic, M., Gumbsch, P., and Wegener, M., 2016, “Tailored Buckling Microlattices as Reusable Light-Weight Shock Absorbers,” Adv. Mater., 28(28), pp. 5865–5870. [CrossRef]
Findeisen, C., Hohe, J., Kadic, M., and Gumbsch, P., 2017, “Characteristics of Mechanical Metamaterials Based on Buckling Elements,” J. Mech. Phys. Solids, 102, pp. 151–164. [CrossRef]
Restrepo, D., Mankame, N. D., and Zavattieri, P. D., 2015, “Phase Transforming Cellular Materials,” Extrem. Mech. Lett., 4, pp. 52–60. [CrossRef]
Correa, D. M., Klatt, T., Cortes, S., Haberman, M., Kovar, D., and Seepersad, C., 2015, “Negative Stiffness Honeycombs for Recoverable Shock Isolation,” Rapid Prototyp. J., 21(2), pp. 193–200. [CrossRef]
Rafsanjani, A., Akbarzadeh, A., and Pasini, D., 2015, “Snapping Mechanical Metamaterials Under Tension,” Adv. Mater., 27(39), pp. 5931–5935. [CrossRef]
Liu, J., Qin, H., and Liu, Y., 2018, “Dynamic Behaviors of Phase Transforming Cellular Structures,” Compos. Struct., 184, pp. 536–544. [CrossRef]
Haghpanah, B., Shirazi, A., Salari-Sharif, L., Guell Izard, A., and Valdevit, L., 2017, “Elastic Architected Materials With Extreme Damping Capacity,” Extrem. Mech. Lett., 17, pp. 56–61. [CrossRef]
Kidambi, N., Harne, R. L., and Wang, K. W., 2017, “Energy Capture and Storage in Asymmetrically Multistable Modular Structures Inspired by Skeletal Muscle,” Smart Mater. Struct., 26(8), pp. 1–15. [CrossRef]
Alturki, M., and Burgueño, R., 2019, “Response Characterization of Multistable Shallow Domes With Cosine-Curved Profile,” Thin Wall. Struct., 140, pp. 74–94. [CrossRef]
Chen, Q., Zhang, X., and Zhu, B., 2018, “Design of Buckling-Induced Mechanical Metamaterials for Energy Absorption Using Topology Optimization,” Struct. Multidiscip. Optim., 58(4), pp. 1395–1410. [CrossRef]
Benichou, I., and Givli, S., 2013, “Structures Undergoing Discrete Phase Transformation,” J. Mech. Phys. Solids, 61(1), pp. 94–113. [CrossRef]
Vangbo, M., 1998, “An Analytical Analysis of a Compressed Bistable Buckled Beam,” Sens. Actuators A Phys., 69(3), pp. 212–216. [CrossRef]
Raaijmakers, J. G. W., 1987, “Statistical Analysis of the Michaelis-Menten Equation,” Biometrics, 43(4), pp. 793–803. [CrossRef]
Pardo, S. A., 2016, Empirical Modeling and Data Analysis for Engineers and Applied Scientists, Springer, NJ.
Dassault Systèmes, 2012, “Abaqus User Manual.” Abaqus Standard Version, Providence, RI.
Radomirovic, D., and Kovacic, I., 2015, “An Equivalent Spring for Nonlinear Springs in Series,” Eur. J. Phys., 36(5), pp. 1–6. [CrossRef]
Feeny, B. F., and Diaz, A. R., 2010, “Twinkling Phenomena in Snap-Through Oscillators,” J. Vib. Acoust., 132(6), pp. 1–19. [CrossRef]
Carfagni, M., Lenzi, E., and Pierini, M., 1998, “The Loss Factor as a Measure of Mechanical Damping,” Proceedings of the 16th International Modal Analysis Conference, Santa Barbara, CA, Feb. 2–5, 3243, pp. 580–584.

Figures

Grahic Jump Location
Fig. 1

The MCCD system: (a) cross-section of a single CCD unit, (b) schematic force–displacement response of a single CCD, (c) MCCD composed of multiple CCDs, and (d) schematic hysteretic response of an MCCD system. Note that δ is the local CCD displacement, while Δ is the global system displacement.

Grahic Jump Location
Fig. 2

Geometric parameters of a typical CCD: (a) cross-section at the apex and (b) idealized system

Grahic Jump Location
Fig. 3

(a) Normalized Fδ response for monostable and bistable CCDs and (b) multilinear approximation of the Fδ response of a CCD

Grahic Jump Location
Fig. 4

Possible configurations of CCD units in the vertical direction: (a) parallel stacking (np = 2) and (b) series stacking (ns = 2)

Grahic Jump Location
Fig. 5

F–Δ curves for CCDs in (a) parallel configuration and (b) series configuration

Grahic Jump Location
Fig. 6

The idealized MCCD system

Grahic Jump Location
Fig. 7

Force–deformation curves from FEA for MCCD systems: (a) monostable and (b) bistable

Grahic Jump Location
Fig. 8

Number of CCDs in regions I, II, and III during loading stages for a system of ns = 4

Grahic Jump Location
Fig. 9

(a) Schematic F–Δ response of the MCCD system with quantities used to develop the multilinear model and (b) actual and multilinear Fδ responses of a CCD unit

Grahic Jump Location
Fig. 10

F–Δ curves from FEA and analytical model using (a) linear equations and (b) nonlinear equations to calculate keI, keIII, Fbdi,and Fndi

Grahic Jump Location
Fig. 11

Test setup for an MCCD system with ten CCDs (ns = 10)

Grahic Jump Location
Fig. 12

F–Δ curves for MCCD system from experimental tests and the analytical model

Grahic Jump Location
Fig. 13

Experimental F–Δ curves for an MCCD system at varying loading rates: 1, 3, 9, and 15 mm/s

Grahic Jump Location
Fig. 14

(a) Normalized Fδ curve for a CCD with h/t = 2.75 under force and displacement control conditions and (b) loss factor with h/t for different ns values

Grahic Jump Location
Fig. 15

(a) F–Δ curves for MCCDs with h/t = 2.5 and ns = 8 and 14 and (b) loss factor with ns for different h/t ratios

Tables

Errata

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In