Many mechanical designs have parts that come into, or lose, contact with each other. When elastic bodies with second order surface geometries come into contact, the contact patch is expected to be approximately flat and to have an elliptical boundary. Classic Hertzian contact mechanics can be used to model such contacts, but since there is no closed-form analytical solution to predict the major and minor axes of the contact zone ellipse, approximate numerical methods have been developed, some of which are very accurate. Predictions of the mutual approach of the bodies and the contact pressure distribution can then be made. Although the shape of the contact ellipse has been modeled and solved for, to date there has been no solution for the orientation of the contact ellipse with respect to either of the contacting bodies. The contact ellipse orientation is needed in order to model the shear stress distributions that occur when sticking friction forces are developed and separate contact zones of sticking and slipping are expected. Using the results of a numerical solution for the conventional contact parameters, this paper presents an analytical solution of the orientation of the contact ellipse, which is shown to depend only on the curvatures and the relative orientation of the contacting bodies. In order to validate the analytical solution, the results are compared with those from ABAQUS™ finite element simulations for cases of identical bodies and bodies with dissimilar curvatures. The predictions of the contact ellipse orientation angles and the major and minor semi-axes agree very well for all cases considered.
Skip Nav Destination
e-mail: phil.garland@unb.ca
Article navigation
Technical Briefs
Solution of the Contact Zone Orientation for Normal Elliptical Hertzian Contact
Philip P. Garland,
Philip P. Garland
School of Biomedical Engineering,
e-mail: phil.garland@unb.ca
Dalhousie University
, Halifax, NS, B3H 2Y9, Canada
Search for other works by this author on:
Robert J. Rogers
Robert J. Rogers
Hon. Research Professor
Department of Mechanical Engineering,
University of New Brunswick
, Fredericton, NB, E3B 5A3, Canada
Search for other works by this author on:
Philip P. Garland
School of Biomedical Engineering,
Dalhousie University
, Halifax, NS, B3H 2Y9, Canadae-mail: phil.garland@unb.ca
Robert J. Rogers
Hon. Research Professor
Department of Mechanical Engineering,
University of New Brunswick
, Fredericton, NB, E3B 5A3, CanadaJ. Appl. Mech. May 2011, 78(3): 034501 (5 pages)
Published Online: February 16, 2011
Article history
Received:
March 13, 2010
Revised:
November 21, 2010
Posted:
January 5, 2011
Published:
February 16, 2011
Online:
February 16, 2011
Citation
Garland, P. P., and Rogers, R. J. (February 16, 2011). "Solution of the Contact Zone Orientation for Normal Elliptical Hertzian Contact." ASME. J. Appl. Mech. May 2011; 78(3): 034501. https://doi.org/10.1115/1.4003365
Download citation file:
Get Email Alerts
Cited By
Sound Mitigation by Metamaterials With Low-Transmission Flat Band
J. Appl. Mech (January 2025)
Deformation-Dependent Effective Vascular Permeability of a Biological Tissue Containing Parallel Microvessels
J. Appl. Mech (January 2025)
Mechanics of a Tunable Bistable Metamaterial With Shape Memory Polymer
J. Appl. Mech (January 2025)
Related Articles
A New Mechanism of Asperity Flattening in Sliding Contact—The Role of Tool Elastic Microwedge
J. Tribol (October,2003)
Discussion: “A Greenwood–Williamson Model of Small-Scale Friction” ( Jones, R. E., 2007, ASME J. Appl. Mech., 74, pp. 31–40 )
J. Appl. Mech (July,2008)
A Mathematical Model for Frictional Elastic-Plastic Sphere-on-Flat Contacts at Sliding Incipient
J. Appl. Mech (January,2007)
Contact of Coated Systems Under Sliding Conditions
J. Tribol (October,2006)
Related Proceedings Papers
Related Chapters
Introduction to Contact Problems in Structural Mechanics
Contact in Structural Mechanics: A Weighted Residual Approach
Sthenics of Contact
Contact in Structural Mechanics: A Weighted Residual Approach
Data Tabulations
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading