... materials, while for the Ti-6Al-4V, the performance of the three unit cells were nearly similar for the 0.9 porosity. SS316L test articles exhibited higher convective heat transfer compared to the Ti-6Al-4V samples. lattice structures additive manufacturing forced convection Proceedings...

... in the Nusselt number for D C compared to the tandem configuration. flow-induced vibrations heat transfer streamwise and transverse oscillations forced convection vorticity Proceedings of the ASME 2024 Heat Transfer Summer Conference HT2024 July 15-17, 2024, Anaheim, California HT2024-131114 TWO...

... Abstract Heated and unheated flows with forced convection over two fixed circular cylinders in tandem are studied numerically for 80 ≤ Re ≤ 250 and 1 ≤ T* ≤ 2.3. Three different spacing ratios (L/D) = [2, 4, 8] are considered under three heating conditions. The scenarios considered are (1...

... of porosity distribution, heat load, and isothermal boundary condition on the performance of the proposed TPMS-based heat sinks in active cooling using natural and forced convection heat transfer environments. The convection heat transfer coefficient, surface temperature, pressure drop are predicted using CFD...

..., an experiment was carried out for cylinders for values of ε equal to 1, 2, 3 and 4. Heat transfer enhancement Oval-shaped tube Forced convection Cross-flow ANALYSIS OF FLOW AND HEAT TRANSFER CHARACTERISTICS AROUND OVAL- SHAPED CYLINDER Guan-min Zhang, Mao-cheng Tian School of Energy Source...

... Laboratory, Aiken, SC, USA ABSTRACT Experimental investigations were carried out to characterize forced convection behavior of Nanoparticle Enhanced Ionic Liquids (NEILs). 1- butyl-3-methylimidazolium bis{(trifluoromethyl) sulfonyl} imide ([C4mim][NTf2]) was used as the base ionic liquid (IL) with 0.5...

... porosity are compared. air forced convection foam porosity 1 Copyright © 2009 by ASME Proceedings of HT2009 2009 ASME Summer Heat Transfer Conference July 19-23, 2009, San Francisco, California USA HT2009-88467 POROSITY EFFECTS ON THERMAL BEHAVIOUR OF 10 PPI ALUMINUM FOAM Alberto Cavallini...

... presented in literature, referred to cylinders of one size order bigger than the platinum wire and the same slot, all parameters being equal. forced convection two-phase flow subcooling slot jet wire 1 Copyright © 2009 by ASME Proceedings of the ASME 2009 Heat Transfer Summer Conference HT2009...

... corona wind corona discharge electrohydrodynamics forced convection enhancement 1 Copyright © 2007 by ASME Proceedings of HT2007 2007 ASME-JSME Thermal Engineering Summer Heat Transfer Conference July 8-12, 2007, Vancouver, British Columbia, CANADA HT2007-32379 External Forced Convection...

... Forced convection Heat transfer control Proceedings of HT2007 2007 ASME-JSME Thermal Engineering Summer Heat Transfer Conference July 8-12, 2007, Vancouver, British Columbia, CANADA HT2007-32643 FORCED-CONVECTION HEAT TRANSFER CHARACTERISTIC OF ? ? ? ? ? ? ? NON-NEWTONIAN SUSPENSION Masahiko YAMADA...

... of heat dissipation for helical structure confirms the efficacy of the proposed design. Radiator core heat transfer forced convection helical structure heat exchanger Proceedings of 2008 ASME Summer Heat Transfer Conference HT2008 August 10-14, 2008, Jacksonville, Florida USA A D e outside...

... and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems . CPU cooling CFD conjugate heat transfer forced convection heat sink improvement Proceedings of HT2005 : selected and it is modified in order to have lower maximum tempe K forced INTR T cooled while availa comm...

... the period of the incoming stream resonates with the convection time scale. Laminar Forced Convection Cavity Inlet Oscillating Velocity Strouhal Number Proceedings of HT2005 2005 ASME Summer Heat Transfer Conference July 17-22, 2005, San Francisco, California, USA W . t F it dimensionless...

... spacing between two blades is such that the thermal boundary layers merge at the end of the channel. The blades can be cooled either by laminar natural or forced convection. Unheated volumes of fluid near the tips of the boundary layers are eliminated through the insertion of new generations of smaller...

... 03 03 2009 A finite-volume-based computational study of steady laminar forced convection inside a square cavity with inlet and outlet ports is presented. Given a fixed position of the inlet port, the location of outlet port is varied along the four walls of the cavity. The widths...

... of spatially-averaged Nusselt numbers over rib-roughened surface, which permits the effect of Reynolds number, evaluated from the total amount of coolant consumption, on heat transfer to be determined for three test scenarios. Forced Convection Ribbed Narrow Channel 2004 ASME Heat Transfer/Fluids...

... studied. Although several studies of arrays of protruding electronic components in forced convective situations exist, to the extent of the authors knowledge, no investigators have studied two independent heat sources mounted on the same printed circuit board, each maintained at different operating...

... 18 12 2008 Forced convection subcooled boiling experiments were conducted in a BWR-scaled vertical upward annular channel. Water was used as the testing fluid, and the tests were performed at atmospheric pressure. A high-speed digital video camera was applied to capture the dynamics...