With the wide use of axial piston machines of the swashplate type in industry, it is essential to maximize the overall efficiency of the machines. Focusing on the piston-cylinder interface, as it performs as a hydrodynamic bearing simultaneously fulfilling a sealing function, the overall machine can be improved by reducing the power losses due to viscous friction and leakage flow of this interface. This paper presents a research study in regards to altering the geometry of the piston through micro-surface shaping influencing the generation of the fluid film between the piston and the cylinder. This investigation utilizes a novel fully coupled fluid structure interaction model considering both thermal and elastic deformations of the solid bodies to predict the phenomena occurring within the fluid gap. Encompassed in this simulation study is a diversity of piston micro-surface shapes and a wide range of machine operating conditions. The designs presented include an axial sine wave, a flat, cylindrical design with tapered ends, a barreled shape, a combination of the axial sine wave and barrel, along with a circumferential sine wave. High pressure operating conditions in pumping mode as well as common operating conditions in both pumping and motoring mode are considered for the various designs. The results demonstrate up to a 30% reduction in energy dissipation from a standard piston-cylinder interface at higher pressure operating conditions (over 15% reduction considering all three interfaces of the machine) with the addition of a barrel surface shape while a 25% reduction (over 5% overall) is achievable at lower operating pressures in pumping mode with a waved barrel surface profile. As for motoring mode a 30% reduction (around 10% overall) is possible with the introduction of a waved barrel surface profile on the piston. It will also be shown, that not only are these reductions possible though microsurface shaping of the piston, but the reliability of the machine is also improved by reducing run-in wear all while maintaining a cost-effective, manufacturable design.
- Fluid Power Systems and Technology Division
The Impact of Micro-Surface Shaping on the Piston/Cylinder Interface of Swash Plate Type Machines
- Views Icon Views
- Share Icon Share
- Search Site
Wondergem, AM, & Ivantysynova, M. "The Impact of Micro-Surface Shaping on the Piston/Cylinder Interface of Swash Plate Type Machines." Proceedings of the ASME/BATH 2015 Symposium on Fluid Power and Motion Control. ASME/BATH 2015 Symposium on Fluid Power and Motion Control. Chicago, Illinois, USA. October 12–14, 2015. V001T01A060. ASME. https://doi.org/10.1115/FPMC2015-9610
Download citation file: