Research Papers

Coupling of Creases and Shells

[+] Author and Article Information
Wei Wang

Department of Engineering Mechanics,
Tsinghua University,
Beijing 100084, China

Xinming Qiu

Department of Engineering Mechanics,
Tsinghua University,
Beijing 100084, China
e-mail: qxm@tsinghua.edu.cn

1Corresponding author.

Contributed by the Applied Mechanics Division of ASME for publication in the JOURNAL OF APPLIED MECHANICS. Manuscript received September 27, 2017; final manuscript received November 10, 2017; published online November 28, 2017. Assoc. Editor: Kyung-Suk Kim.

J. Appl. Mech 85(1), 011009 (Nov 28, 2017) (7 pages) Paper No: JAM-17-1537; doi: 10.1115/1.4038470 History: Received September 27, 2017; Revised November 10, 2017

In the analysis of origami structures, the deformation of shells usually couples with the rotation of creases, which leads to the difficulty of solving high-order differential equations. In this study, first the deformation of creased shell is solved analytically. Then, an approximation method named virtual crease method (VCM) is employed, where virtual creases are used to approximate the deformation of shells, and then a complex structure can be simplified into rigid shells connected by real and virtual creases. Then, VCM is used to analyze the large deflection of shells as well as the bistable states of origami structures, such as single creased shell and cell of Miura-Ori. Compared with experiment results, the deformed states given by VCM are quite accurate. Therefore, this generalized method may have potential applications in the analysis of origami structures.

Copyright © 2018 by ASME
Topics: Deformation , Shells
Your Session has timed out. Please sign back in to continue.


Hogstrom, K. , Backes, P. , Burdick, J. , Kennedy, B. , Kim, J. , Lee, N. , Malakhova, G. , Mukherjee, R. , Pellegrino, S. , and Wu, Y.-H. , 2014, “ A Robotically-Assembled 100-Meter Space Telescope,” International Astronautical Congress, Toronto, ON, Canada, Sept. 29–Oct. 3.
Murtaza, N. A. , and Ihtesham, U. R. , 2011, “ An Auxetic Structure Configured as Oesophageal Stent With Potential to Be Used for Palliative Treatment of Oesophageal Cancer; Development and In Vitro Mechanical Analysis,” J. Mater. Sci. Mater. Med., 22(11), pp. 2573–2581. [CrossRef] [PubMed]
Martinez, R. V. , Fish, C. R. , Chen, X. , and Whitesides, G. M. , 2012, “ Magnetic Assembly of Soft Robots With Hard Components,” Adv. Funct. Mater, 22(7), pp. 1376–1384. [CrossRef]
Babaee, S. , Overvelde, J. T. B. , Chen, E. R. , Tournat, V. , and Bertoldi, K. , 2016, “ Reconfigurable Origami-Inspired Acoustic Waveguides,” Sci. Adv., 2(11), p. e1601019. [CrossRef] [PubMed]
Han, D. , Pal, S. , Nangreave, J. , Deng, Z. , Liu, Y. , and Yan, H. , 2011, “ DNA Origami With Complex Curvatures in Three-Dimensional Space,” Science, 332(6027), pp. 342–346. [CrossRef] [PubMed]
Lechenault, F. , Thiria, B. , and Adda-Bedia, M. , 2014, “ Mechanical Response of a Creased Sheet,” Phys. Rev. Lett., 112, p. 244301. [CrossRef] [PubMed]
Waitukaitis, S. , Menaut, R. , Gin-ge Chen, B. , and Hecke, M. V. , 2015, “ Origami Multistability: From Single Vertices to Metasheets,” Phys. Rev. Lett., 114(5), p. 055503. [CrossRef] [PubMed]
Lechenault, F. , and Adda-Bedia, M. , 2015, “ Generic Bistability in Creased Conical Surfaces,” Phys. Rev. Lett., 115(23), p. 235501. [CrossRef] [PubMed]
Silverberg, J. L. , Evans, A. A. , McLeod, L. , Hayward, R. C. , Hull, T. , Santangelo, C. D. , and Cohen, I. , 2014, “ Using Origami Design Principles to Fold Reprogrammable Mechanical Metamaterials,” Science, 345(6197), pp. 647–650. [CrossRef] [PubMed]
Overvelde, J. T. B. , Jong, T. A. , Shevchenko, Y. , Becerra, S. A. , Whitesides, G. M. , Weaver, J. C. , Hoberman, C. , and Bertoldi, K. , 2016, “ A Three-Dimensional Actuated Origami-Inspired Transformable Metamaterial With Multiple Degrees of Freedom,” Nat. Commun., 7, p. 10929. [CrossRef] [PubMed]
Wittbrodt, E. , Adamiec-Wójcik, I. , and Wojciech, S. , 2007, Dynamics of Flexible Multibody Systems: Rigid Finite Element Method, Springer-Verlag, Berlin.
Wei, Z. Y. , Guo, Z. V. , Dudte, L. , Liang, H. Y. , and Mahadevan, L. , 2013, “ Geometric Mechanics of Periodic Pleated Origami,” Phys. Rev. Lett., 110(21), p. 215501. [CrossRef] [PubMed]
Seffen, K. A. , 2016, “ Fundamental Conical Defects: The d-Cone, Its e-Cone and Its p-Cone,” Phys. Rev. E, 94(1), p. 013002. [CrossRef] [PubMed]
Nocedal, J. , and Wright, S. J. , 2006, Sequential Quadratic Programming, Springer, New York.
Cerda, E. , and Mahadevan, L. , 1998, “ Conical Surfaces and Crescent Singularities in Crumpled Sheets,” Phys. Rev. Lett., 80(11), p. 2358. [CrossRef]
Starostin, E. L. , and van der Heijden, G. H. M. , 2007, “ The Shape of a Mobius Strip,” Nat. Mater., 6, pp. 563–567. [CrossRef] [PubMed]


Grahic Jump Location
Fig. 1

The single creased shell under uniform pulling: (a) Initial profile and deformed profile and (b) the contribution ratio of the crease rotation to total deformation (L=80 mm, φ0=3π/2, k=B/(200h) and α=0.1)

Grahic Jump Location
Fig. 2

The rotation methods: (a) the initial shape, (b) rotate with respect to O1O2 of angle ϕ1, (c) rotate with respect to O1O4 of angle −ϕ2, and (d) rotate with respect to O1O6 of angle ϕ3

Grahic Jump Location
Fig. 3

A circular paper under central compression (r = 24.8 mm, ψ = 75 deg). The results of VCM with (a) both equality and inequality constraints and (b) only equality constraints. The experimental results with the support of (c) an intact cylinder, (d) a defected cylinder, and (e) the convergence of VCM.

Grahic Jump Location
Fig. 4

Möbius strip with b = 5 mm and L = 120 mm: (a) VCM result of nv=36, (b) experiment result, (c) the oblique creases on the Möbius strip, (d) comparison between VCM and experiment

Grahic Jump Location
Fig. 5

The single creased shell under a concentrated force along z direction. (a) The deformation profile and (b) the normalized strain energy versus displacement (φ0=2.22 and kr=kv,ϕ=π/2).

Grahic Jump Location
Fig. 6

The response of the bistability of a creased shell (W = 20 mm, L = 80 mm, φ0=2.22, kr=kv): (a)–(c) VCM results of nv=4,12,28, respectively, and (d) experimental result

Grahic Jump Location
Fig. 7

The bistable state of Miura-ori structure (l1=20 mm, l2=37 mm, α=1.03, β=1.09, kr=kv): (a)–(c) VCM results of nv=4,12,28, respectively, and (d) experimental result




Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In