0
Research Papers

Plane-Strain Shear Dislocation on a Leaky Plane in a Poroelastic Solid

[+] Author and Article Information
Yongjia Song

Department of Astronautics and Mechanics,
Harbin Institute of Technology,
Postbox 344,
92 West Dazhi Street,
Harbin 150001, China;
Department of Civil and Environmental Engineering,
Northwestern University,
2145 Sheridan Road,
Evanston, IL 60208
e-mail: songyongjia061220110@126.com

John W. Rudnicki

Fellow ASME
Department of Civil
and Environmental Engineering,
Northwestern University;
Department of Mechanical Engineering,
Northwestern University,
2145 Sheridan Road,
Evanston, IL 60208
e-mail: jwrudn@northwestern.edu

1Corresponding author.

Contributed by the Applied Mechanics Division of ASME for publication in the JOURNAL OF APPLIED MECHANICS. Manuscript received September 14, 2016; final manuscript received November 3, 2016; published online November 21, 2016. Editor: Yonggang Huang.

J. Appl. Mech 84(2), 021008 (Nov 21, 2016) (8 pages) Paper No: JAM-16-1451; doi: 10.1115/1.4035179 History: Received September 14, 2016; Revised November 03, 2016

Solutions for the stress and pore pressure p are derived due to sudden introduction of a plane strain shear dislocation on a leaky plane in a linear poroelastic, fluid-infiltrated solid. For a leaky plane, y=0, the fluid mass flux is proportional to the difference in pore pressure across the plane requiring that Δp=Rp/y, where R is a constant resistance. For R=0 and R, the expressions for the stress and pore pressure reduce to previous solutions for the limiting cases of a permeable or impermeable plane, respectively. Solutions for the pore pressure and shear stress on and near y=0 depend significantly on the ratio of x and R. For the leaky plane, the shear stress at y=0 initially increases from the undrained value, as it does from the impermeable plane, but the peak becomes less prominent as the distance x from the dislocation increases. The slope (σxy/t) at t=0 for the leaky plane is always equal to that of the impermeable plane for any large but finite x. In contrast, the slope σxy/t for the permeable fault is negative at t=0. The pore pressure on y=0 initially increases as it does for the impermeable plane and then decays to zero, but as for the shear stress, the increase becomes less with increasing distance x from the dislocation. The rate of increase at t=0 is equal to that for the impermeable fault.

FIGURES IN THIS ARTICLE
<>
Copyright © 2017 by ASME
Your Session has timed out. Please sign back in to continue.

References

Pan, E. , 1991, “ Dislocation in an Infinite Poroelastic Medium,” Acta Mech., 87(1–2), pp. 105–115. [CrossRef]
Zheng, P. , and Ding, B. , 2015, “ Body Force and Fluid Source Equivalents for Dynamic Dislocations in Fluid-Saturated Porous Media,” Transport Porous Med., 107(1), pp. 1–12. [CrossRef]
Wang, Z. , and Hu, H. , 2016, “ Moment Tensors of a Dislocation in a Porous Medium,” Pure Appl. Geophys., 173(6), pp. 2033–2045. [CrossRef]
Booker, J. R. , 1974, “ Time-Dependent Strain Following Faulting of a Porous Medium,” J. Geophys. Res., 79(14), pp. 2037–2044. [CrossRef]
Rice, J. R. , and Cleary, M. P. , 1976, “ Some Basic Stress Diffusion Solutions for Fluid-Saturated Elastic Porous Media With Compressible Constituents,” Rev. Geophys. Space Phys., 14(2), pp. 227–241. [CrossRef]
Rudnicki, J. W. , 1987, “ Plane strain Dislocations in Linear Elastic Diffusive Solids,” ASME J. Appl. Mech., 54(3), pp. 545–552. [CrossRef]
Rice, J. R. , and Simons, D. A. , 1976, “ The Stabilization of Spreading Shear Faults by Coupled Deformation-Diffusion Effects in Fluid-Infiltrated Porous Materials,” J. Geophys. Res., 81(29), pp. 5322–5334. [CrossRef]
Simons, D. A. , 1977, “ Boundary Layer Analysis of Propagating Mode II Cracks in Porous Elastic Media,” J. Mech. Phys. Solids, 25(2), pp. 99–115. [CrossRef]
Rudnicki, J. W. , and Koutsibelas, D. A. , 1991, “ Steady Propagation of Plane Strain Shear Cracks on an Impermeable Plane in an Elastic Diffusive Solid,” Int. J. Solids Struct., 27(2), pp. 205–225. [CrossRef]
Rudnicki, J. W. , 1991, “ Boundary Layer Analysis of Plane Strain Shear Cracks Propagating Steadily on an Impermeable Plane in an Elastic Diffusive Solid,” J. Mech. Phys. Solids, 39(2), pp. 201–221. [CrossRef]
Rudnicki, J. W. , and Roeloffs, E. A. , 1990, “ Plane-Strain Shear Dislocations Moving Steadily in Linear Elastic Diffusive Solids,” ASME J. Appl. Mech., 57(1), pp. 32–39. [CrossRef]
Rudnicki, J. W. , and Rice, J. R. , 2006, “ Effective Normal Stress Alteration Due to Pore Pressure Changes Induced by Dynamic Slip Propagation on a Plane Between Dissimilar Materials,” J. Geophys. Res., 111(B10), p. B10308. [CrossRef]
Biot, M. A. , 1941, “ General Theory of Three-Dimensional Consolidation,” J. Appl. Phys., 12(2), pp. 155–164. [CrossRef]
Wang, H. , 2000, Theory of Linear Poroelasticity With Applications to Geomechanics and Hydrology, Princeton University Press, Princeton, NJ.
Anand, L. , 2015, “ 2014 Drucker Medal Paper: A Derivation of the Theory of Linear Poroelasticity From Chemoelasticity,” ASME J. Appl. Mech, 82(11), p. 111005. [CrossRef]
Detournay, E. , and Cheng, A. H.-D. , 1993, “ Fundamentals of Poroelasticity,” Comprehensive Rock Engineering: Principles, Practice and Projects, J. A. Hudson , ed., Vol. 2, Pergamon Press, Oxford, UK, pp. 113–171.
Cheng, A. H.-D. , 2016, Poroelasticity, Springer International Publishing, Heidelberg, Germany.
Erdélyi, A. , Magnus, W. , Oberhettinger, F. , and Tricomi, F. , 1954, Tables of Integral Transforms, Vols. 1 and 2, McGraw-Hill, New York.
Abramowitz, M. , and Stegun, I. A. , eds., 1964, Handbook of Mathematical Functions, Appl. Math. Ser. 55, National Bureau of Standards, Washington, DC.
Chester, F. M. , Chester, J. S. , Kirschner, D. L. , Schulz, S. E. , and Evans, J. P. , 2004, “ Structure of Large-Displacement, Strike-Slip Fault Zones in the Brittle Continental Crust,” Rheology and Deformation in the Lithosphere at Continental Margins, G. D. Karner , ed., Columbia University Press, New York, pp. 223–260.
Rice, J. R. , 2006, “ Heating and Weakening of Faults During Earthquake Slip,” J. Geophys. Res., 111(B5), p. B05311. [CrossRef]
Rice, J. R. , Rudnicki, J. W. , and Platt, J. D. , 2014, “ Stability and Localization of Rapid Shear in Fluid-Saturated Fault Gouge: 1. Linearized Stability Analysis,” J. Geophys. Res., 119(B5), pp. 4311–4333. [CrossRef]
Wibberley, C. A. J. , and Shimamoto, T. , 2003, “ Internal Structure and Permeability of Major Strike-Slip Fault Zones: The Median Tectonic Line in Mie Prefecture, Southwest Japan,” J. Struct. Geol., 25(1), pp. 59–78. [CrossRef]
Mandel, J. , 1953, “ Consolidation des sols (Étude Mathématique),” Geotechnique, 3(7), pp. 287–299. [CrossRef]
Rudnicki, J. W. , 1986, “ Slip on an Impermeable Fault in a Fluid-Saturated Rock Mass,” Earthquake Source Mechanics (Geophysical Monograph), Das, J. , Boatwright, J. , and Scholz, C. H. , eds, Vol. 37, American Geophysical Union, Washington, DC, pp. 81–89.

Figures

Grahic Jump Location
Fig. 1

A shear dislocation at the origin corresponds to cutting the negative x axis, displacing the top to the right and the bottom to the left by the same amount, then bonding the cut elastic plane back together

Grahic Jump Location
Fig. 2

Schematic representation of a thin porous layer

Grahic Jump Location
Fig. 3

Time-dependence of the dimensionless shear stress ((σxy(x,0+,t)−σxy(x,0+,∞))/(σxy(x,0+,0+)−σxy(x,0+,∞))) on y=0 for a shear dislocation at the origin for various values of x/R. Values for the permeable and impermeable planes were calculated using the expressions from Refs. [5,6], but calculations for sufficiently large (impermeable) and small (permeable) R were indistinguishable from these on the scale of the plot.

Grahic Jump Location
Fig. 4

Time-dependence of the nondimensional pore pressure induced on y=0+ ahead (x>0) of a shear dislocation at the origin for different values of x/R. (Results for the impermeable plane here and in Fig. 5 have been calculated from Ref. [6], but on the scale of the plot they are indistinguishable from those for small x/R. The pore pressure induced on the permeable plane is zero. Values of the pore pressure on y=0− are equal in magnitude and opposite in sign to those on y=0+. The pore pressure induced on the permeable slip plane is zero.

Grahic Jump Location
Fig. 5

Nondimensional pore pressure induced on plane y=0 by a shear dislocation at the origin as a function of position x at a fixed time t≠0. The plot is for various values of ct/R2. The pore pressures for the shear dislocation are shown for y=0+; values for y=0− are the negative of those shown. The pore pressure on the permeable plane is zero.

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In