0
Research Papers

Assessment of Mechanical Properties of Interphase in Compositelike Geomaterials by Ultrasonic Measurement and the Extended Multi-Inclusion Model

[+] Author and Article Information
Duc-Phi Do

Laboratory PRISME,
Polytech’ Orleans,
8 rue Léonard de Vinci,
Orleans Cedex 2 45072, France
e-mail: Duc-phi.do@univ-orleans.fr

Dashnor Hoxha

Laboratory PRISME,
Polytech’ Orleans,
8 rue Léonard de Vinci,
Orleans Cedex 2 45072, France
e-mail: Dashnor.hoxha@univ-orleans.fr

Truong-Son Bui

Laboratory PRISME,
Polytech’ Orleans,
8 rue Léonard de Vinci,
Orleans Cedex 2 45072, France
e-mail: buitruongsondcct@gmail.com

1Corresponding author.

Manuscript received September 25, 2014; final manuscript received December 30, 2014; published online January 23, 2015. Assoc. Editor: Daining Fang.

J. Appl. Mech 82(3), 031001 (Mar 01, 2015) (10 pages) Paper No: JAM-14-1448; doi: 10.1115/1.4029487 History: Received September 25, 2014; Revised December 30, 2014; Online January 23, 2015

This work aims at assessing the mechanical properties of interphase in a compositelike geomaterial by using a nondestructive characterization technique by ultrasound and an inversion procedure based on the theoretical multi-inclusion model. This latter model is extended here and adapted for the multiphase heterogeneous materials which may contain an arbitrary number of interphases between each inhomogeneity and matrix phase. Some numerical applications on a cement-based geomaterial show that this procedure can be used as a complementary method to characterize the properties of interphase.

FIGURES IN THIS ARTICLE
<>
Copyright © 2015 by ASME
Your Session has timed out. Please sign back in to continue.

References

Constantinides, G., and Ulm, F. J., 2004, “The Effect of Two Types of C-S-H on the Elasticity of Cement-Based Materials: Results From Nanoindentation and Micromechanical Modeling,” Cem. Concr. Res., 34(1), pp. 67–80. [CrossRef]
Mehta, P. K., and Monteiro, P. J. M., 1993, Concrete: Microstructure, Properties, and Materials, Prentice-Hall, Inc., Eaglewood Cliffs, NJ.
Pichler, B., and Hellmich, C., 2011, “Upscaling Quasi-Brittle Strength of Cement Paste and Mortar: A Multi-Scale Engineering Mechanics Model,” Cem. Concr. Res., 41(5), pp. 467–476. [CrossRef]
Scrivener, K. L., Crumbie, A. K., and Laugesen, P., 2004, “The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate in Concrete,” Interface Sci., 12(4), pp. 411–421. [CrossRef]
Stora, E., Bary, B., He, Q. C., Deville, E., and Montarnal, P., 2009, “Modelling and Simulations of the Chemo–Mechanical Behaviour of Leached Cement-Based Materials. Leaching Process and Induced Loss of Stiffness,” Cem. Concr. Res., 39(9), pp. 763–772. [CrossRef]
Do, D. P., and Hoxha, D., 2013, “Effective Transfer Properties of Partially Saturated Geomaterials With Interfaces Using Immersed Interface Method,” Int. J. for Num. Anal. Methods Geomech., 37(18), pp. 3237–3257. [CrossRef]
Heukamp, F. H., Lemarchand, E., and Ulm, F. J., 2005, “The Effect of Interfacial Properties on the Cohesion of Highly Filled Composite Materials,” Int. J. Solids Struct., 42(1), pp. 287–305. [CrossRef]
Lutz, M. P., Monteiro, P. J. M., and Zimmerman, R. W., 1997, “Inhomogeneous Interfacial Transition Zone Model for the Bulk Modulus of Mortar,” Cem. Concr. Res., 27(7), pp. 1113–1122. [CrossRef]
Nie, S., and Basaran, C., 2005, “A Micromechanical Model for Effective Elastic Properties of Particulate Composites With Imperfect Interfacial Bonds,” Int. J. Solids Struct., 42(14), pp. 4179–4191. [CrossRef]
Wong, H. S., Zobel, M., Buenfeld, N. R., and Zimmerman, R. W., 2009, “Influence of the Interfacial Transition Zone and Microcracking on the Diffusivity, Permeability, and Sorptivity of Cement-Based Materials After Drying,” Mag. Concr. Res., 61(8), pp. 571–589. [CrossRef]
Yang, C. C., 1998, “Effect of the Transition Zone on the Elastic Moduli of Mortar,” Cem. Concr. Res., 28(5), pp. 727–736. [CrossRef]
Xiao, J., Li, W., Sun, Z., Lange., D. A., and Shah., S. P., 2013, “Properties of Interfacial Transition Zones in Recycled Aggregate Concrete Tested by Nanoindentation,” Cem. Concr. Compos., 37(March), pp. 276–292. [CrossRef]
Hernandez, M. G., Anaya, J. J., Ullate, L. G., Cegarra, M., and Sanchez, T., 2006, “Application of a Micromechanical Model of Three Phases to Estimating the Porosity of Mortar by Ultrasound,” Cem. Concr. Res., 36(4), pp. 617–624. [CrossRef]
Eshelby, J. D., 1957, “The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems,” Proc. R. Soc. London A, 241(1226), pp. 376–396. [CrossRef]
Mori, T., and Tanaka, K., 1973, “Average Stress in Matrix and Average Elastic Energy of Materials With Misfitting Inclusions,” Acta Metall., 21(5), pp. 571–574. [CrossRef]
Mura, T., 1987, Micromechanics of Defects in Solids, 2nd ed., Martinus Nijhoff Publishers, Dordrectht, The Netherlands.
Nemat-Nasser, S., and Hori, M., 1993, Micromechanics: Overall Properties of Heterogenous Materials, North Holland, Elsevier, Amsterdam, The Netherlands.
Torquato, S., 2002, Random Heterogenous Materials: Microstructure and Macroscopic Properties, Springer-Verlag, New York.
Ponte Castaneda, P., and Willis, J. R., 1995, “The Effect of Spatial Distribution on the Effective Behavior of Composite Materials and Cracked Media,” J. Mech. Phys. Solids, 43(12), pp. 1919–1951. [CrossRef]
Christensen, R. M., and Lo, K. H., 1979, “Solution for Effective Shear Properties in Three Phase Sphere and Cylinder Model,” J. Mech. Phys. Solids, 27(4), pp. 315–330. [CrossRef]
Hori, M., and Nemat-Nasser, S., 1993, “Double-Inclusion Model and Overall Moduli of Multi-Phase Composites,” Mech. Mater., 14(3), pp. 189–206. [CrossRef]
Hu, G. K., and Weng, G. J., 2000, “The Connections Between the Double-Inclusion Model and the Ponte Castaneda–Willis, Mori–Tanaka, and Kuster–Toksoz Models,” Mech. Mater., 32(8), pp. 495–503. [CrossRef]
Lipinski, P., Barhdadi, E., and Cherkaoui, M., 2006, “Micromechanical Modeling of an Arbitrary Ellipsoidal Multi-Coated Inclusion,” Philos. Mag., 86(10), pp. 1305–1326. [CrossRef]
Hervé, E., and Zaoui, A., 1993, “n-Layered Inclusion-Based Micromechanical Modelling,” Int. J. Eng. Sci., 31(1), pp. 1–10. [CrossRef]
Aboutajeddine, A., and Neale, K. W., 2005, “The Double-Inclusion Model: A New Formulation and New Estimates,” Mech. Mater., 37(2–3), pp. 331–341. [CrossRef]
Do, D. P., 2008, “Application of Homogenization Approaches to the Study of the Thermo-Hydro-Mechanical Properties of Rocks. Application to Argillites,” Ph.D. thesis, National Polytechnic Institute of Lorraine (INPL), Nancy, France (in French).
Dormieux, L., Kondo, D., and Ulm, F., 2006, Microporomechanics, 1st ed., Wiley, Chichester, UK.
Giraud, A., Gruescu, C., Do, D. P., Homand, F., and Kondo, D., 2007, “Effective Thermal Conductivity of Transversely Isotropic Media With Arbitrary Oriented Ellipsoıdal Inhomogeneities,” Int. J. Solids Struct., 44(9), pp. 2627–2647. [CrossRef]
Giraud, A., Hoxha, D., Do, D. P., and Magnenet, V., 2008, “Effect of Pore Shape on Effective Porothermoelastic Properties of Isotropic Rocks,” Int. J. Solids Struct., 45(1), pp. 1–23. [CrossRef]
Gu, S. T., Shao, J. F., and He, Q. C., 2009, “Multiscale Modeling of the Macroscopic Size-Dependent Effects of Interfacial Transition Zones in Concrete and Their Damage,” Procedia Eng., 1(1), pp. 27–30. [CrossRef]
Eslami, J., Hoxha, D., and Grgic, D., 2011, “Estimation of the Damage of a Porous Stone Using Continuous Wave Velocity Measurements During Uniaxial Creep Tests,” Mech. Mater., 49, pp. 51–65. [CrossRef]
Lines, D., Wharrie, J., and Hottenroth, J., 2010, “Multi-Channel Ultrasound Toolbox: A Flexible Modular Approach for Real-Time Array Imaging and Automated Inspection,” American Society for Nondestructive Testing Annual Fall Conference (ASNT) Houston, TX, Nov.15–18.
Hernandez, M. G., Anaya, J. J., Ibanez, A., and Ullate, L. G., 2004, “Effect of the Fluid in the Inclusions of Cement Paste Over the Ultrasonic Velocity,” Ultrasonics, 42(1–9), pp. 865–869. [CrossRef] [PubMed]
Hashina, Z., and Monteiro, P. J. M., 2002, “An Inverse Method to Determine the Elastic Properties of the Interphase Between the Aggregate and the Cement Paste,” Cem. Concr. Res., 32(8), pp. 1291–1300. [CrossRef]

Figures

Grahic Jump Location
Fig. 1

Sketch of the multi-inclusion model adapted to the multiphase heterogeneous materials

Grahic Jump Location
Fig. 2

Conceptual model of the multiphase heterogeneous material-like mortar

Grahic Jump Location
Fig. 3

Influence of the porosity and morphology of pores to the effective Young’s modulus of material

Grahic Jump Location
Fig. 4

Influence of the elastic properties (a) and thickness of the interphase to the effective Young’s modulus of material (b) (results calculated with fp = 0 and fi = 0.45)

Grahic Jump Location
Fig. 5

Influence of porosity, mechanical properties, and thickness of the interphase to the effective Young’s modulus of material (results calculated with volume fraction of inclusion fi = 0.45 and spherical pores)

Grahic Jump Location
Fig. 6

Experimental device used for measurements of ultrasonic velocities (a) and example of curves of pore access radii obtained by mercury intrusion technique (b) on studied materials

Grahic Jump Location
Fig. 7

Young’s modulus (a) and Poisson’s ratio (b) of samples of cement paste and mortar obtained from the measured ultrasonic velocities

Grahic Jump Location
Fig. 8

Young’s modulus (a) and Poisson’s ratio (b) of cement paste: comparison of the numerical and experimental results

Grahic Jump Location
Fig. 9

Mechanical properties of ITZ as a function of its thickness obtained from the inversion of ultrasonic measurement for grain sands radius equal to r = 425 μm

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In