0
Research Papers

2D Elastodynamic Solution for the Impact Response of Laminated Composites

[+] Author and Article Information
Jiawen Xie

Research Assistant
e-mail: jwxie@umich.edu

Anthony M. Waas

Professor
e-mail: dcw@umich.edu
Department of Aerospace Engineering,
University of Michigan,
Ann Arbor, MI 48109-2140

1Corresponding author.

Manuscript received July 2, 2013; final manuscript received August 20, 2013; accepted manuscript posted August 23, 2013; published online October 16, 2013. Editor: Yonggang Huang.

J. Appl. Mech 81(4), 041015 (Oct 16, 2013) (12 pages) Paper No: JAM-13-1272; doi: 10.1115/1.4025276 History: Received July 02, 2013; Revised August 20, 2013; Accepted August 23, 2013

This paper presents a general, exact, two-dimensional (2D) elastodynamic analysis of the response of laminated composite panels subjected to transverse impact loading under conditions of planar deformation. The natural frequencies and mode shapes of free vibration are first extracted. Inspired by a transformation technique for solving a special class of partial differential equations, the forced vibration problem of an impacted laminated panel is solved using an eigenfunction expansion technique. Several examples are studied by varying the laminate lay-up and length-to-thickness ratio. The distributions of transverse stresses in the through-the-thickness direction are further compared with two one-dimensional theories, classical lamination theory (CLT) and first-order shear deformation theory (FSDT), showing the inadequacy of these theories and the necessity to establish a benchmark solution for 2D elastodynamics. The 2D elastodynamic theory that is formulated is also applicable for studying other multilayered structures subjected to arbitrary loading profiles.

FIGURES IN THIS ARTICLE
<>
Copyright © 2014 by ASME
Your Session has timed out. Please sign back in to continue.

References

Pagano, N. J., 1969, “Exact Solution for Composite Laminates in Cylindrical Bending,” J. Compos. Mater., 3(3), pp. 398–411. [CrossRef]
Pagano, N. J., 1970, “Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates,” J. Compos. Mater., 4(1), pp. 20–34. [CrossRef]
Srinivas, S., and Rao, A. K., 1970, “Bending, Vibration and Buckling of Simply Supported Thick Orthotropic Rectangular Plates and Laminates,” Int. J. Solids Struct., 6(11), pp. 1463–1481. [CrossRef]
Carrera, E., 2002, “Theories and Finite Elements for Multilayered, Anisotropic, Composite Plates and Shells,” Arch. Comput. Methods Eng., 9(2), pp. 87–140. [CrossRef]
Carrera, E., 2003, “Historical Review of Zig-Zag Theories for Multilayered Plates and Shells,” ASME Appl. Mech. Rev., 56(3), pp. 287–308. [CrossRef]
Davies, G., and Olsson, R., 2004, “Impact on Composite Structures,” Aeronaut. J., 108(1089), pp. 541–563. Available at http://www.aerosociety.com/News/Publications/Aero-Journal/Online/594/Impact-on-composite-structures
Brewer, J. C., and Lagace, P. A., 1988, “Quadratic Stress Criterion for Initiation of Delamination,” J. Compos. Mater., 22(12), pp. 1141–1155. [CrossRef]
Cui, W. C., Wisnom, M. R., and Jones, M., 1992, “A Comparison of Failure Criteria to Predict Delamination of Unidirectional Glass/Epoxy Specimens Waisted Through the Thickness,” Composites, 23(3), pp. 158–166. [CrossRef]
Davies, G., and Robinson, P., 1992, “Predicting Failure by Debonding/Delamination,” AGARD: 74th Structures and Materials Meeting, Debonding/Delamination of Composites, Patras, Greece, May 24–29.
Davies, G., and Zhang, X., 1995, “Impact Damage Prediction in Carbon Composite Structures,” Int. J. Impact Eng., 16(1), pp. 149–170. [CrossRef]
Schoeppner, G., and Abrate, S., 2000, “Delamination Threshold Loads for Low Velocity Impact on Composite Laminates,” Composites, Part A, 31(9), pp. 903–915. [CrossRef]
Abrate, S., 2001, “Modeling of Impacts on Composite Structures,” Compos. Struct., 51(2), pp. 129–138. [CrossRef]
Abrate, S., 1994, “Impact on Laminated Composites: Recent Advances,” ASME Appl. Mech. Rev., 47, p. 517. [CrossRef]
Richardson, M., and Wisheart, M., 1996, “Review of Low-Velocity Impact Properties of Composite Materials,” Composites, Part A, 27(12), pp. 1123–1131. [CrossRef]
Simitse, G., and Hodges, D. H., 2006, Fundamentals of Structural Stability, Butterworth-Heinemann, Burlington, MA, pp. 177–179.
Farlow, S. J., 1993, Partial Differential Equations for Scientists and Engineers, Dover, New York, pp. 46–47.
Reddy, J. N., 2003, Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, 2nd ed., CRC, Boca Raton, FL, pp. 131–272.
Pagano, N. J., and Hatfield, H. J., 1972, “Elastic Behavior of Multilayered Bidirectional Composites,” AIAA J., 10(7), pp. 931–933. [CrossRef]

Figures

Grahic Jump Location
Fig. 1

2D geometry of the laminated composite. The composite is assumed in a state-of-plane strain in the xz plane and simply supported at its left and right ends.

Grahic Jump Location
Fig. 2

Parabolic impact loading

Grahic Jump Location
Fig. 3

FEM model used for the numerical simulation of the impact event

Grahic Jump Location
Fig. 4

Fourier expansion of impact loading in space for aspect ratios of 6 and 21

Grahic Jump Location
Fig. 5

The half-time snapshots of impact response of stress σ¯z at the central line x = L/2

Grahic Jump Location
Fig. 6

The half-time snapshots of impact response of stress σ¯z off the central area

Grahic Jump Location
Fig. 7

The half-time snapshots of impact response of stress τ¯xz at the left end x = 0

Grahic Jump Location
Fig. 8

The half-time snapshots of impact response of stress τ¯xz off the central area

Grahic Jump Location
Fig. 9

The vibrational motion versus time for three-layer laminate (0/90/0)

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In