Speziale, C. G., 1991, “Analytical Methods for the Development of Reynolds Stress Closures in Turbulence,” Annu. Rev. Fluid Mech.

[CrossRef], 23 , pp. 107–157.

Lumley, J. L., 1970, “Toward a Turbulent Constitutive Relation,” J. Fluid Mech., 41 , pp. 413–434.

Speziale, C. G., 1987, “On Nonlinear K−L and K−ε Models of Turbulence,” J. Fluid Mech., 178 , pp. 459–475.

Reynolds, W. C., 1976, “Computation of Turbulent Flows,” Annu. Rev. Fluid Mech.

[CrossRef], 8 , pp. 183–208.

Hanjalić, K., and Launder, B. E., 1972, “A Reynolds Stress Model of Turbulent and its Application to Thin Shear Flow,” J. Fluid Mech., 52 , pp. 609–638.

Pope, S. B., 1975, “A More General Effective-Viscosity Hypothesis,” J. Fluid Mech., 72 , pp. 331–340.

Thangam, S., Wang, X., and Zhou, Y., 1999, “Development of a Turbulence Model Based on the Energy Spectrum for Flows Involving Rotation,” Phys. Fluids

[CrossRef], 11 , pp. 2225–2234.

Zeman, O., 1994, “A Note on the Spectra and Decay of Rotating Homogeneous Turbulence,” Phys. Fluids

[CrossRef], 6 , pp. 3221–3223.

Zhou, Y., 1995, “A Phenomenological Treatment of Rotating Turbulence,” Phys. Fluids

[CrossRef], 7 , pp. 2092–2094.

Lumley, J. L., 1978, “Computational Modeling of Turbulent Flows,” Adv. Appl. Mech., 18 , pp. 123–176.

Speziale, C. G., Sarkar, S., and Gatski, T. B., 1991, “Modeling the Pressure-Strain Correlation of Turbulence: An Invariant Dynamical Systems Approach,” J. Fluid Mech., 227 , pp. 245–272.

Pope, S. B., 1983, “Consistent Modeling of Scalar in Turbulent Flows,” Phys. Fluids

[CrossRef], 26 (2), pp. 404–408.

Gatski, T. B., and Speziale, C. G., 1993, “On Explicit Algebraic Stress Models for Complex Turbulent Flows,” J. Fluid Mech., 254 , pp. 59–78.

Imao, S., and Itoh, M., 1996, “Turbulent Characteristics of the Flow in an Axially Rotating Pipe,” Int. J. Heat Fluid Flow, 17 , pp. 445–451.

Kitoh, O., 1991, “Experimental Study of Turbulent Swirling Flow in a Straight Pipe,” J. Fluid Mech., 225 , pp. 445–479.

Yakhot, V., Orszag, S. A., Thangam, S., Gatski, T. B., and Speziale, C. G., 1992, “Development of Turbulence Models for Shear Flows by a Double Expansion Technique,” Phys. Fluids A

[CrossRef], 4 , pp. 1510–1520.

Ribeiro, M. M., and Whitelaw, J. H., 1980, “Coaxial Jets With and Without Swirl,” J. Fluid Mech., 96 , pp. 769–795.

Sislian, J. P., and Cusworth, R. A., 1986, “Measurements of Mean Velocity and Turbulent Intensities in a Free Isothermal Swirling Jet,” AIAA J., 24 , pp. 303–309.

Murakami, M., and Kikuyama, K., 1989, “Turbulent Flow in Axially Rotating Pipes,” ASME J. Fluids Eng., 102 , pp. 97–103.

Lavan, Z., Nielsen, H., and Fejer, A. A., 1969, “Separation and Flow Reversal in Swirling Flows in Circular Duct,” Phys. Fluids

[CrossRef], 12 , pp. 1747–1756.

Speziale, C. G., Younis, B. A., and Berger, S. A., 2000, “Analysis and Modeling of Turbulent Flow in an Axially Rotating Pipe,” J. Fluid Mech.

[CrossRef], 407 , pp. 1–26.

Poroseva, S. V., Kassinos, C. A., Langer, C. A., and Reynolds, W. C., 2002, “Structure-Based Turbulence Model: Application to a Rotating Pipe Flow,” Phys. Fluids

[CrossRef], 14 , pp. 1523–1532.

Hirai, S., Takagi, T., and Matsumoto, M., 1988, “Predictions of the Laminarization Phenomena in an Axially Rotating Pipe Flow,” ASME J. Fluids Eng., 110 , pp. 425–430.

Younis, B. A., and Gibson, M. M., 1986, “Calculation of Swirling Jet With a Reynolds Stress Closure,” Phys. Fluids, 29 (1), pp. 38–47.

Muck, K. C., Hoffmann, P. H., and Bradshaw, P., 1985, “The Effect of Convex Surface Curvature on Turbulent Boundary Layers,” J. Fluid Mech., 161 , pp. 347–369.

Gillis, J. C., and Johnston, J. P., 1983, “Turbulent Boundary-Layer Flow and Structure on a Convex Wall and its Redevelopment on a Flat Wall,” J. Fluid Mech., 135 , pp. 123–153.

Hoffmann, P. H., Much, K. C., and Bradshaw, P., 1985, “The Effect of Concave Surface Curvature on Turbulent Boundary Layers,” J. Fluid Mech., 161 , pp. 371–403.

Gibson, M. M., Jones, W. P., and Younis, B. A., 1981, “Calculations of Turbulent Boundary Layers on Curved Surfaces,” Phys. Fluids

[CrossRef], 24 , pp. 386–395.

Irwin, H. P. A. H., and Smith, P. A., 1975, “Prediction of the Effect of Streamline Curvature on Turbulence,” Phys. Fluids

[CrossRef], 18 , pp. 624–630.

Rodi, W., and Scheuerer, G., 1983, “Calculation of Curved Shear Layers With Two-Equation Turbulence Models,” Phys. Fluids

[CrossRef], 26 (6), pp. 1422–1436.

Girimaji, S. S., 1997, “A Galilean Invariant Explicit Algebraic Reynolds Stress Model for Curved Flows,” Phys. Fluids

[CrossRef], 9 , pp. 1067–1077.

Lilley, D. G., and Rhode, D. L., 1982, “A Computer Code for Swirling Turbulent Axisymmetric Recirculating Flows in Practical Isothermal Combustor Geometries,” NASA Contractor Report No. 3442.

Durbin, P. A., 1993, “A Reynolds Stress Model for Near-Wall Turbulence,” J. Fluid Mech., 249 , pp. 465–498.

Eskinazi, S., and Yeh, H., 1956, “An Investigation of Fully Developed Turbulent Flows in a Curved Channel,” J. Aeronaut. Sci., 23 , Jan., pp. 23–75.

Younis, B. A., Speziale, C. G., and Berger, S. A., 1998, “Accounting for Effects of a System Rotation on the Pressure-Strain Correlation,” AIAA J., 36 , pp. 1746–1748.