0
Article

Transient Elastodynamic Crack Growth in Functionally Graded Materials

[+] Author and Article Information
Vijaya Bhaskar Chalivendra

Graduate Aeronautical Laboratorires, California Institute of Technology, Pasadena, CA 91125

Arun Shukla

Dynamic Photomechanics Laboratory, Department of Mechanical Engineering and Applied Mechanics, University of Rhode Island, Kingston, RI 02881 e-mail: skuklaa@egr.ur.edu

J. Appl. Mech 72(2), 237-248 (Mar 15, 2005) (12 pages) doi:10.1115/1.1831292 History: Received August 25, 2003; Revised August 03, 2004; Online March 15, 2005
Copyright © 2005 by ASME
Your Session has timed out. Please sign back in to continue.

References

Niino,  M., Hirai,  T., and Watanabe,  R., 1987, “The Functionally Gradient Materials,” J. Jap. Soc. Comp. Mater.,13:1, p. 257.
Delale,  F., and Erdogan,  F., 1983, “The Crack Problem for a Nonhomogeneous Plane,” J. Appl. Mech., 50, pp. 67–80.
Schovanec,  L., and Walton,  J. R., 1988, “On the Order of Stress Singularity for an Antiplane Shear Crack at the Interface of Two Bonded Inhomogeneous Elastic Materials,” ASME J. Appl. Mech., 55, pp. 234–236.
Konda,  N., and Erdogan,  F., 1994, “The Mixed Mode Crack Problem in a Nonhomogeneous Elastic Plane,” Eng. Fract. Mech., 47, pp. 533–545.
Gu,  P., and Asaro,  R. J., 1997, “Cracks in Functionally Graded Materials,” Int. J. Solids Struct., 34:1, pp. 1–17.
Li,  C. Y., and Weng,  G. J., 2002, “Antiplane Crack Problem in Functionally Graded Piezoelectric Materials,” J. Appl. Mech., 69, pp. 481–488.
Rousseau,  C. E., and Tippur,  H. V., 2000, “Compositionally Graded Materials With Cracks Normal to the Elastic Gradient,” Acta Mater., 48, pp. 4021–4033.
Parameswaran,  V., and Shukla,  A., 2002, “Asymptotic Stress Fields for Stationary Cracks Along the Gradient in Functionally Graded Materials,” Trans. ASME, 69, pp. 240–243.
Atkinson,  C., and List,  R. D., 1978, “Steady State Crack Propagation Into Media With Spatially Varying Elastic Properties,” Int. J. Eng. Sci., 16, pp. 717–730.
Wang,  X. D., and Meguid,  S. A., 1995, “On the Dynamic Crack Propagation in an Interface With Spatially Varying Elastic Properties,” Int. J. Fract., 69, pp. 87–99.
Nakagaki,  M., Sasaki,  H., and Hagihara,  S., 1995, “A Study of Crack in Functionally Graded Materials Under Dynamic Loading,” PVP-Dynamic Fracture, Failure and Deformations, ASME,300, pp. 1–6.
Parameswaran,  V., and Shukla,  A., 1998, “Dynamic Fracture of a Functionally Fracture in Functionally Gradient Materials,” J. Mater. Sci., 33, pp. 3303–3311.
Rousseau,  C. E., and Tippur,  H. V., 2001, “Dynamic Fracture of Compositionally Graded Materials With Cracks Along the Elastic Gradient: Experiments and Analysis,” Mech. Mater., 33, pp. 403–421.
Parameswaran,  V., and Shukla,  A., 1999, “Crack-Tip Stress Fields for Dynamic Fracture in Functionally Gradient Materials,” Mech. Mater., 31, pp. 579–596.
Jiang,  L. Y., and Wang,  X. D., 2002, “On the Dynamic Crack Propagation in an Interphase With Spatially Varying Elastic Properties Under Inplane Loading,” Int. J. Fract., 114, pp. 225–244.
Chalivendra,  V. B., Shukla,  A., and Parameswaran,  V., 2002, “Dynamic Out of Plane Displacement Fields for an Inclined Crack in Graded Materials,” J. Elast., 69, pp. 99–119.
Freund,  L. B., and Rosakis,  A. J., 1992, “The Structure of the Near-Tip Field During Transient Elastodynamic Crack Growth,” J. Am. Soc. Mass Spectrom., 40(3), pp. 699–719.
Gu,  P., and Asaro,  R. J., 1997, “Cracks in Functionally Graded Materials,” Int. J. Solids Struct., 34(1), pp. 1–17.
Freund, L. B., 1990, Dynamic Fracture Mechanics, Cambridge University Press, Cambridge, MA.
G. R. Irwin, 1980, Series Representation of the Stress Field Around Constant Speed Cracks, University of Maryland Lecture Notes.
Parameswaran,  V., and Shukla,  A., 2002, “Near-Tip Out of Plane Displacement Fields for Dynamic Crack Propagation in Functionally Graded Materials,” Mech. Res. Commun., 29, pp. 397–406.
Tippur,  H. V., Krishnaswamy,  S., and Rosakis,  A. J., 1991, “A Coherent Gradient Sensor for Crack Tip Measurements: Analytical and Experimental Results,” Int. J. Fract., 40, pp. 193–204.
Dally,  J. W., and Shukla,  A., 1979, “Dynamic Crack Behavior at Initiation,” Mech. Res. Commun., 6(4), pp. 239–244.

Figures

Grahic Jump Location
Propagating crack orientation with respect to the direction of property variation in FGM
Grahic Jump Location
Effect of rate of change of mode-I stress intensity factor on contours of constant out-of-plane displacement around the crack tip for opening mode loading in an FGM [δ=20, φ=0°, KID(t)=1 MPa m1/2,KIID(t)=0,c=300 m/s,dc/dt=0,dKIID(t)/dt=0 and ν=0.3]
Grahic Jump Location
Effect of transient mode-I stress intensity factor on out-of-plane displacement at various positions around the crack tip (theta is measured in a counterclockwise direction from positive x-axis)
Grahic Jump Location
Effect of rate of change of mode-I stress intensity factor and mode-II stress intensity factor on contours of constant out-of-plane displacement around the crack tip for mixed mode loading in an FGM [δ=20, φ=45°, KID(t)=1 MPa m1/2,KIID(t)=1 MPa m1/2, c=300 m/s, dc/dt=0, and ν=0.3]
Grahic Jump Location
Effect of crack-tip acceleration on contours of constant out-of-plane displacement around the crack tip for opening mode loading in an FGM (δ=20, φ=0°, KID(t)=1 MPa m1/2,KIID(t)=0,dKID(t)/dt=105 MPa m1/2 s−1,dKIID(t)/dt=0,c=300 m/s, and ν=0.3)
Grahic Jump Location
Effect of acceleration on out-of-plane displacement at various positions around the crack tip (theta is measured in a counterclockwise direction from positive x-axis)
Grahic Jump Location
Effect of crack-tip acceleration on contours of constant out-of-plane displacement around the crack tip for mixed mode loading in a FGM [δ=20, φ=45°, KID(t)=KIID(t)=1 MPa m1/2,dKID(t)/dt=dKIID(t)/dt=105 MPa m1/2 s−1, c=300 m/s, and ν=0.3]

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In