0
TECHNICAL PAPERS

On the Singularity Induced by Boundary Conditions in a Third-Order Thick Plate Theory

[+] Author and Article Information
C. S. Huang

Associate Professor, Department of Civil Engineering, National Chiao Tung University, 1001 Ta-Hsueh Road, Taiwan 30050, R. O. C.e-mail: cshuang@cc.nctu.edu.tw

J. Appl. Mech 69(6), 800-810 (Oct 31, 2002) (11 pages) doi:10.1115/1.1490371 History: Received July 11, 2001; Revised February 28, 2002; Online October 31, 2002
Copyright © 2002 by ASME
Your Session has timed out. Please sign back in to continue.

References

Rice, J. R., and Tracy, D. M., 1973, “Computational Fracture Mechanics,” Numerical and Computer Methods in Structural Mechanics, S. J. Fenves et al., eds., Academic Press, San Diego, CA, pp. 585–623.
Aminpour,  M. A., and Holsapple,  K. A., 1991, “Finite Element Solutions for Propagating Interface Cracks With Singularity Elements,” Eng. Fract. Mech., 39(3), pp. 451–468.
Leissa,  A. W., McGee,  O. G., and Huang,  C. S., 1993, “Vibrations of Sectorial Plates Having Corner Stress Singularities,” ASME J. Appl. Mech., 60, pp. 134–140.
McGee,  O. G., Leissa,  A. W., and Huang,  C. S., 1992, “Vibrations of Cantilevered Skewed Plates With Corner Stress Singularities,” Int. J. Numer. Methods Eng., 35(2), pp. 409–424.
William,  M. L., 1952, “Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates in Extension,” ASME J. Appl. Mech., 19, pp. 526–528.
Hein,  V. L., and Erdogan,  F., 1971, “Stress Singularities in a Two-Material Wedge,” Int. J. Fract. Mech., 7(3), pp. 317–330.
Dempsey,  J. P., and Sinclair,  G. B., 1979, “On the Stress Singularities in the Plate Elasticity of the Composite Wedge,” J. Elast., 9(4), pp. 373–391.
Ting,  T. C. T., and Chou,  S. C., 1981, “Edge Singularities in Anisotropic Composites,” Int. J. Solids Struct., 17(11), pp. 1057–1068.
Hartranft,  R. J., and Sih,  G. C., 1969, “The Use of Eigenfunction Expansions in the General Solution of Three-Dimensional Crack Problems,” J. Math. Mech., 19(2), pp. 123–138.
Xie,  M., and Chaudhuri,  R. A., 1998, “Three-Dimensional Stress Singularity at a Bimaterial Interface Crack Front,” Compos. Struct., 40(2), pp. 137–147.
William, M. L., 1952, “Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates Under Bending,” Proceedings of 1st U.S. National Congress of Applied Mechanics, ASME, New York, pp. 325–329.
Williams, M. L., and Owens, R. H., 1954, “Stress Singularities in Angular Corners of Plates Having Linear Flexural Rigidities for Various Boundary Conditions,” Proceedings of 2nd U.S. National Congress of Applied Mechanics, ASME, New York, pp. 407–411.
William, M. L., and Chapkis, R. L., 1958, “Stress Singularities for a Sharp-Notched Polarly Orthotropic Plate,” Proceedings of 3rd U.S. National Congress of Applied Mechanics, ASME, New York, pp. 281–286.
Rao,  A. K., 1971, “Stress Concentrations and Singularities at Interfaces Corners,” Z. Angew. Math. Mech., 51, pp. 395–406.
Ojikutu,  I. O., Low,  R. O., and Scott,  R. A., 1984, “Stress Singularities in Laminated Composite Wedge,” Int. J. Solids Struct., 20(8), pp. 777–790.
Huang,  C. S., Leissa,  A. W., and McGee,  O. G., 1993, “Exact Analytical Solutions for the Vibrations of Sectorial Plates With Simply-Supported Radial Edges,” ASME J. Appl. Mech., 60, pp. 478–483.
Sinclair,  G. B., 2000, “Logarithmic Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates Under Bending,” ASME J. Appl. Mech., 67, pp. 219–223.
Burton,  W. S., and Sinclair,  G. B., 1986, “On the Singularities in Reissner’s Theory for the Bending of Elastic Plates,” ASME J. Appl. Mech., 53, pp. 220–222.
Huang,  C. S., McGee,  O. G., and Leissa,  A. W., 1994, “Exact Analytical Solutions for the Vibrations of Mindlin Sectorial Plates With Simply Supported Radial Edges,” Int. J. Solids Struct., 31(11), pp. 1609–1631.
Huang, C. S., 2001, “Stress Singularities at Angular Corners in First-Order Shear Deformation Plate Theory,” Int. J. Mech. Sci., submitted for publication.
Reddy, J. N., 1999, Theory and Analysis of Elastic Plates, Taylor and Francis, London.
Schmidt,  R., 1977, “A Refined Nonlinear Theory for Plates With Transverse Shear Deformation,” J. Indust. Math. Soc., 27(1), pp. 23–38.
Krishna Murty,  A. V., 1977, “Higher Order Theory for Vibration of Thick Plates,” AIAA J., 15(2), pp. 1823–1824.
Reddy, J. N., 1984, Energy and Variational Methods in Applied Mechanics, John Wiley and Sons, New York.
Leissa,  A. W., McGee,  O. G., and Huang,  C. S., 1993, “Vibrations of Circular Plates Having V-Notches or Sharp Radial Cracks,” J. Sound Vib., 161(2), pp. 227–239.
Huang, C. S., 1991, “Singularities in Plate Vibration Problems,” Ph.D. dissertation, The Ohio State University.

Figures

Grahic Jump Location
Distributions of Mr and Mθ=α/2 for a wedge with C_F boundary conditions
Grahic Jump Location
Distribution of Mr and Mθ along the symmetric axis for a wedge with free radial edges
Grahic Jump Location
Variation of minimum Re(λm) with vertex angle
Grahic Jump Location
Coordinate system and positive displacement components for a sector plate

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In